kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hello,
How can I restart windows service (for example Apache) with PowerShell or batch file remotely?
Article Comments
Hi there,
For this you would need to write a script that performs this action. However you can also use t...
Tue, 10 Jun, 2025 at 4:21 PM
Hello,
I'm currently using the Free 100 sensor version. After about a month I'm started getting a message on my dashboard in the lower right hand corner that reads "Your trial license has expired 1 days ago!" in one of ...
Tue, 10 Jun, 2025 at 4:21 PM
Hi,
i have 2 maps which i like to be public and rotation. how can i achieve this.
thanks alot,
adrian
Article Comments
Hi there,
Please find the according information here:
https://helpdesk.paessler.com/en/support/so...
Tue, 10 Jun, 2025 at 4:21 PM
Hallo,
ich versuche gerade für jeden unserer Standorte die Adresse einzutragen.
Dazu kopiere ich mir die Adresse aus Google Maps und füge sie unter Ortsangabe ins Objekt ein.
In 70% der Fälle erkennt er nicht, dass Daten eingetragen sind,...
Tue, 10 Jun, 2025 at 4:21 PM
Hello,
is it possible to automatically name a device (e.g. Zebra Printer) by identifying the vendor via the MAC address?
Alternatively, could I name a device by SNMP-Strings, like the Model?
Thanks!
Article Comments
Hi Till,...
Tue, 10 Jun, 2025 at 4:21 PM
I have 2 branch[branch-A, branch-B].
Now I finish for setup PRTG Server and add device+sensor at branch-A.
Then Can I copy config from branch-A and paste to branch-B?
Thank You.
Article Comments
Hello,
Thank you for contact...
Tue, 10 Jun, 2025 at 4:21 PM
I'm trying to setup a large PRTG installation, but I have problems automating it. The following article specifies that I should use SNMP if possible. ( https://helpdesk.paessler.com/en/support/solutions/articles/76000041624-how-can-i-sp...
Tue, 10 Jun, 2025 at 4:21 PM
I have 3 different temperature-sensors monitored (server, team1, team2).
Can I see them alltogether in a single graphics?
Article Comments
Hi Richard,
You can use the Factory Sensor to achieve this. In this Sensor, you can ...
Tue, 10 Jun, 2025 at 4:21 PM
Hello, I am creating a custom device template and wanted to know if I can add a custom value lookup to a specific sensor, that will then populate to each channel of that sensor. Is this possible? Or am I going to have to add the lookup to e...
Tue, 10 Jun, 2025 at 4:21 PM
How to set CPU high utilization limit.
Article Comments
Hello,
You are able to set a Warning or a Limit on a sensors by configuring the Warning-/Error-Limits on those sensors, so that they change their state into Warning or Er...
Tue, 10 Jun, 2025 at 4:21 PM
Hi, we have 10 Ruckus access points and would to add them however as soon as we add a sensor for SNMP Traffic it complains about unknown user name. Is there somewhere we are meant to add credentials. We tried adding our admin creds under v3...
Tue, 10 Jun, 2025 at 4:21 PM
Hi guys, I am to monitor traffic on 8412zl switch but this is proving difficult. I can auto discover the switch and its ports but no traffic stats are displayed. I have done some testing and I can scan the device using the PRTG tester and t...
Tue, 10 Jun, 2025 at 4:21 PM
How do I generate a CSR for an Entrust certificate?
Article Comments
Check the guide over at Digicert on how to create a certificate signing request on Windows in general :)
PRTGapi |
Feature Requests |
SNMP Issues
Kin...
Tue, 10 Jun, 2025 at 4:21 PM
Hi. I looked the forms up about "How to use HTTP Content Sensor" on PRTG Web Page. It says: "You should fill the script from your URL, you should make value type Float and make number of channels 2. I did all of them but i g...
Tue, 10 Jun, 2025 at 4:21 PM
Can you explain to me why, at the moment the maintenance license has expired, all of a sudden, prtg.exe is put to use all the resources CPU when he had never done it before with the same quantity of sensor?
Article Comments
This...
Tue, 10 Jun, 2025 at 4:21 PM
We have been running the SOAP Filter for VMWare for Health Status for over a week now, and just as we left the office for the holiday it started reporting oddly. I checked the node and it is reporting 100% but PRTG seems to think that every...
Tue, 10 Jun, 2025 at 4:21 PM
Hallo,
u.a. monitoren wir via ICMP auch unsere Clients und lassen Sie in einer entsprechenden Map anzeigen.
Damit diese aber nicht in der normalen Fehleranzeige (Status DOWN) erscheinen, habe ich deren Ping-Sensoren zu dem "Ack. D...
Tue, 10 Jun, 2025 at 4:21 PM
Hi,
I created a template for the Linux servers and when I apply this template on a new device the threshold error for each processor is not applied. The threshold is applied only on Total channel.
Why ?
Thanks,
Isabelle
...
Tue, 10 Jun, 2025 at 4:21 PM
Hello,
I am trying to send data (from .xml file) from application using POST method to prtg. I have correct token, port 5050 is open for me, I do have respond from prtg probe but this one: { "status": "Ok", "Matc...
Tue, 10 Jun, 2025 at 4:21 PM
Hi,
I have a simple script with following code
$files=get-childitem "C:\Temp\test" | where {$_.extension -ne ".txt" -and $_.PSIsContainer -ne "True"}
$numberfiles=$files.count
if ($numberfiles -gt "...
Tue, 10 Jun, 2025 at 4:21 PM
Are there any plans to add monitoring of Azure Stack HCI/Storage Spaces Direct, other monitoring products such as SCOM have that ability: https://www.microsoft.com/en-us/download/details.aspx?id=54700
Some of the information is also avail...
Tue, 10 Jun, 2025 at 4:21 PM
How does Paessler create its road maps for PRTG and how are feature requests and user feedback handled by Paessler?
Article Comments
This article is outdated.
We have Changed Our Approach to Handling Feature Requests
For u...
Tue, 10 Jun, 2025 at 4:21 PM
Hi,
I have searched if there is some sort of availability/uptime report that can be generated using PRTG. I have tried the default report templates and also created my own but it doesn't seem to meet our requirements.
We want to see...
Tue, 10 Jun, 2025 at 4:21 PM
How to monitor a particular service of Linux and windows server
Linux - HA proxy, NFS, Apache & MySQL
Windows - Apache
Article Comments
Hi there,
Thank you very much for your contact.
For Windows based service monitor...
Tue, 10 Jun, 2025 at 4:21 PM
Hi,
we are using the SNMP Fujitsu System Health Sensor for some of our customers. When will the sensor leave beta status?
Thanks and regards
Andreas
Article Comments
Hello Andreas,
the current version is planned to be repl...
Tue, 10 Jun, 2025 at 4:21 PM
Hello!
I want to create a report which must include several channels from a lot of different devices? For example CPU Usage from all of my Cisco devices. I want to have all this channels on one Graph. Is this possible? Or this can be made...
Tue, 10 Jun, 2025 at 4:21 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to have an option in the trigger so we ...
Tue, 10 Jun, 2025 at 4:21 PM
Hello!
Can PRTG show trendline on sensors or on graphs? i'm interesten in just line.
Article Comments
Hi there,
Trendlines are on our wish list, but currently not planned for the near future. Please feel free to open a...
Tue, 10 Jun, 2025 at 4:21 PM
I ask for help in setting up the notification. I have sensor # 1 channel ID 1, when down state, send lastmessage sensor # 1 channel ID 1 and lastmessage sensor # 2 channel ID 2 (message in telegram Execute HTTP Action ). Is it possible
...
Tue, 10 Jun, 2025 at 4:21 PM
Hi There,
Anyone used the Get-PRTGO365Licenses.ps1 script successfully from :
https://github.com/debold/PRTG-O365Licensing/blob/master/Get-PRTGO365Licenses.ps1
This sensor was set up last year but is now reporting Error connecting to y...
Tue, 10 Jun, 2025 at 4:21 PM
I've been trying to get dynamic channels from a JSON file but been having issues. I need a list of the labels and their error statuses for each entry in my JSON file. There should only be about 7 results so i shouldn't be close to t...
Tue, 10 Jun, 2025 at 4:20 PM
I need to apply this logic:
1. Group1 is paused if (ping sensor 1 and ping sensor 2 are down) or ping sensor 3 is down
2. Group 2 is paused if (ping sensor 1 and ping sensor 2 are down)
I cannot use a factory sensor because it does not...
Tue, 10 Jun, 2025 at 4:20 PM
There is an SSL-Certificate sensor which gives a yellow in channel
Unable to check revocation status
This make the whole sensor changing to yellow. And beside that all sensors go to yellow until the root (probe).
I read that I cannot ...
Tue, 10 Jun, 2025 at 4:20 PM
Just purchased additional PRTG sensor license. Am trying to add monitoring for the Cisco Small Business Series switches to monitor Memory, disk usage using the SNMP Cisco System Health sensor but it returns a PE185 code.
Does it mean the ...
Tue, 10 Jun, 2025 at 4:20 PM
hi
we have a temp sensor which we would like to monitor with PRTG.
I have downloaded the trail and installed but i am struggling to setup the monitoring of our temp sensor.
The temp sensor has the following webpage which when brow...
Tue, 10 Jun, 2025 at 4:20 PM
We recently switched from Solar Winds Orion to PRTG. I had been using some scripts in S/W that automatically saved the running configuration of devices each night, and another one that downloads a copy of the startup config each night. I...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
it it possible to monitor / track / create a history of User Logins/Logoffs to track user activity ?
whenever a user uses his login/pass at a terminal server, a client or whatever it should be monitored.
would be nice if it is possi...
Tue, 10 Jun, 2025 at 4:20 PM
I´ve severals libraries, and i need to put into a map, but the maps only display the probes objects. How i put this object type on the map?
Article Comments
Hi vjose,
Please check this post where a colleague exemplary provided...
Tue, 10 Jun, 2025 at 4:20 PM
Hello!
We starting to monitor users environment and one of important steps is user PCs Health. Since users PCs is lots of different hardware we trying to find some universal way to make this possible. One of parameters we interested in is...
Tue, 10 Jun, 2025 at 4:20 PM
Good morning,
today I wrote a script to monitor the services on a docker host.
You'll get a warning if a container is dead which should be running.
Just move the script to /var/prtg/scripts and create a new sensor "SSH Script...
Tue, 10 Jun, 2025 at 4:20 PM
Hello!
PRTG has special sensor to monitor physical disk health "WMI HDD Health". When we add this sensor to device sensor has a lot of parameters with gauges. But no any threshholds on any of this parameters. Is it neccesery to ...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
Is there a way to monitor the limit of maximum connection pools on a windows server?
Scenario: There is a limit for the maximum connection pools for a windows server. As soon as this limit is breached, the server goes into hung stat...
Tue, 10 Jun, 2025 at 4:20 PM
I would like to use SMS provider TextMagic to send text messages with PRTG's notifications. How can I configure PRTG to do so?
Article Comments
TextMagic is an email-to-SMS provider: You sign up for an account and then you g...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
I have my own Access Point controller that its communication between AP and controller using the CAPWAP protocol which by default the SNMP will be disabled and take over by the controller.
But the question is, can i also use PRTG to ...
Tue, 10 Jun, 2025 at 4:20 PM
Trying to import the MIB file from my Server Room Temp Sensor. The file from the vendor is a .MIB file. I am using MIB Importer 3.5.8.
When I try to open or drag and drop the file into the Importer I get an error: "One or more file t...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
I would like to setup threshold conditions triggering a notification, not based on an explicit value, for 2 different cases :
- case 1 : detect sensor value is increasing
- case 2 : for a sensor sending back a string, trigger notifica...
Tue, 10 Jun, 2025 at 4:20 PM
Friends I have knowledge about PRTG but now I have a gas station where I have implemented PRTG but to monitor the network issue and I want to integrate to monitor the UPS, the temperature in the gas pumps will monitor the fuel level, and ot...
Tue, 10 Jun, 2025 at 4:20 PM
im looking for a way to no alarm the interfaces and devices in change time .
i have found a way in setuo >>>>schedules , but it makes interfaces pause not no alarm
Article Comments
Hello,
Thank you for contacting u...
Tue, 10 Jun, 2025 at 4:20 PM
Many customers in our geography expect one line summary report which reflect uptime sensor wise for a gving duration of n days, preferably a month. At present summarization is possible only for a maximum of 24 hours. This will help in manag...
Tue, 10 Jun, 2025 at 4:20 PM
We have a PRTG instance with 6 probes.
Last time we updated PRTG, those probes were updated and some of the corresponding servers went offline causing a big issue.
Is it possible to prevent some of the probes to be updated when updating PRT...
Tue, 10 Jun, 2025 at 4:20 PM
Hello,
In version 17.4.35, while I appreciate the new interface, I would like to remove all of the numerous "Add Sensor" buttons on every line in the device tree view under Medium view. I would also like to make each item wider ...
Tue, 10 Jun, 2025 at 4:20 PM
Hi All,
I am using the SNMP Traffic sensor pointed at the internet connection on our firewall. I'm getting results, but I would like to display them as a percentage of our maximum bandwidth.
i've seen this setting on other sens...
Tue, 10 Jun, 2025 at 4:20 PM
im using PRTG 17.3.32.2478 x64 and i wand to enable sound alert for a specific sensor or interface but i counldnt find. i just find enabling alerts for all prtg and dashboards only.
if there is a way please guide me.
thanks
Article...
Tue, 10 Jun, 2025 at 4:20 PM
HA feature becomes critical as the network gets larger. The monitoring failure can have adverse effects. Therefore, limiting to 5000 sensors in a cluster probe environment is a serious limitation. Instead of cluster probe, two local probes ...
Tue, 10 Jun, 2025 at 4:20 PM
Hello!
PRTG has Physical Disk IO sensor, but it work via WMI, is there any alternative to it for SNMP?
https://www.paessler.com/manuals/prtg/windows_physical_disk_io_sensor - i mean this.
Thank you!
Article Comments
Hello ...
Tue, 10 Jun, 2025 at 4:20 PM
Hi Awesome PRTG Developer Team,
At the moment, the SNMP Trap Receiver sensor is limited to displaying filtered trap messages (%trapmessages) inside the body of an email notification. There is also no way of exporting messages into a prett...
Tue, 10 Jun, 2025 at 4:20 PM
Is there a way to monitor NFS mount through PRTG and then execute certain commands if the mount has gone stale?
Thanks.
Article Comments
Hello,
Can you clarify for me what you mean by stale?
We can monitor them, I just nee...
Tue, 10 Jun, 2025 at 4:20 PM
Alarms to notify us when any server is at the wrong time.
All servers need to have this sensor to tell us the time difference and in case it is wrong, the PRTG remains the "Windows Time" service or another command to set the time....
Tue, 10 Jun, 2025 at 4:20 PM
we have two groups of users for our PRTG system:
Admins: they add/delete objects and sensors, they change threshold and alter the configuration... They have fullaccess to everything.
Users: they do the daily business, react to alarms a...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
I created a custom sensor for our system which scans within VMM for checkpoints and shows how many days ago the checkpoints have been created. For the ones who are interested:
#Imprting the Virtual Machine Manager Module
Import-Modu...
Tue, 10 Jun, 2025 at 4:20 PM
Title says it all, I want to basically invert a sensor to only notify when it's checking in/up. How do I go about doing this
Article Comments
Hi Drita,
You can use a "State Trigger" for the corresponding Sensor. ...
Tue, 10 Jun, 2025 at 4:20 PM
Hi
We started to roll out our PRTG environment to the whole department.
Therefore my idea was to create groups for each responsible person with a link to a usergroup.
this is needed, that only the responsible person is getting notified w...
Tue, 10 Jun, 2025 at 4:20 PM
This is a pretty straight forward question:
How will PRTG integration with Plixer (Scrutinizer) affect the way I monitor a network? Can the programs be configured in such a way that they give very different information about the same devi...
Tue, 10 Jun, 2025 at 4:20 PM
Dear support,
When I try to add new map with format .jpg or png, it show the error:
Oops...
The validation of the data provided failed due to the following:
Please specify a background image in GIF/JPG/PNG format only
The object...
Tue, 10 Jun, 2025 at 4:20 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to change the order in which my Remote-...
Tue, 10 Jun, 2025 at 4:20 PM
Hi,
I am running a powershell script which uses the office365 Connect-MsolService cmdlet.
When running the script manually on the probe server, it runs fine. I run this on the same user account as the PRTG sensor does. The cmdlet is obvio...
Tue, 10 Jun, 2025 at 4:20 PM
We have a situation where we are using Azure Filesync with iets tiering solution.
On-prem file server is used as a cache for the file share that is located in Azure.
We would like to use PRTG to monitor the Size on disk value:
https://img...
Tue, 10 Jun, 2025 at 4:20 PM
Hello,
I'm successfully using PRTG reports to export the UP and DOWN statistics of certain sensors divided by working days and weekends, but I can't see the pause status.
To overcome this lack I am exporting via API the "pa...
Tue, 10 Jun, 2025 at 4:20 PM
I understand how to pause a sensor with this type of request "api/pauseobjectfor.htm?id", but how can I resume the sensor with a webrequest. The documentation has this step missing.
Article Comments
Hi there,
This i...
Tue, 10 Jun, 2025 at 4:20 PM
Hi. I have a 12 mbps internet connection that I want to check, but the default sensor range is 84,968 kbit/s.
I want to modify it to 14000 kbit/s
Article Comments
Hello Hans,
Could you please share a screenshot to illustrate w...
Tue, 10 Jun, 2025 at 4:19 PM
A probe on our console was deleted. The probe is still installed on the host server. Is it possible to recover any of the data and reconnect the probe to the console?
Version 19.2.49.2018+
Article Comments
Hi there,
I'm ...
Tue, 10 Jun, 2025 at 4:19 PM
Hi all,
I am trying to setup PTRG web interface on a Windows 7 client while running chrome in kiosk mode / full screen so our department can see our maps on a large screen tv. I have tried the following solutions:
Restarting Chrome
...
Tue, 10 Jun, 2025 at 4:19 PM
Hi
i have a huge amount of new log entries coming my way on my prtg and i can't physically read them all and find the most important ones so I need a way to parse through them and find the most important ones to act on and I am using pr...
Tue, 10 Jun, 2025 at 4:19 PM
Hello!
We think to change some WMI sesnors to PerfCounter Custom, can you give some details of how PerfCounter working? Does this sesnor use WMI or some other technology? How PerfCounter interact with end device? Is this sesnor more light...
Tue, 10 Jun, 2025 at 4:19 PM
Hello,
I want to install PRTG on a dedicated server and besides it I want to run a webpage on the same server but on different port.
Is it possible to integrate the webpage with the PRTG webserver, so I could run both on same webserver...
Tue, 10 Jun, 2025 at 4:19 PM
I created a new probe device and started cloning my sensor groups to it in order to reduce load on the core server.
When I resume monitoring on those cloned groups, it begins auto-discovery, adding many sensors that I do not want. Is this b...
Tue, 10 Jun, 2025 at 4:19 PM
Bonjour,
Est-il possible d'utiliser PRTG pour récupérer les information de SCOM. En effet nos datacenters sont monitorés avec SCOM (Microsoft) et nous souhaiterions utiliser prtg pour avoir une vue globale.
Merci
Article C...
Tue, 10 Jun, 2025 at 4:19 PM
We are having issues with WMI sensors on some but not all of our 2016 servers. We have no issues on any of our 2008 and 2012 servers and as I say it works fine on a few 2016 servers.
On the servers where it is not working it will remain ...
Tue, 10 Jun, 2025 at 4:19 PM
Hello!
Is there any way to import Active Alerts from Microsoft SCOM into PRTG?
Article Comments
Hi Vasiliy,
As of now, we don't have any way of importing SCOM alerts into PRTG, unfortunately. But since it does have a RES...
Tue, 10 Jun, 2025 at 4:19 PM
I would like to use PRTG network monitor to monitorize my Cisco Meraki network by Meraki API. Is it possible?
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API
Thank you
Article...
Tue, 10 Jun, 2025 at 4:19 PM
Hello!
Can you explain what part of PRTG make a decisions to change sensors states (Up, Down, Warning), is it Core Server? Probe transtaling only request result into database? Or Probe changing the states and core only display the result?...
Tue, 10 Jun, 2025 at 4:19 PM
I have been working with Meraki for almost a year now trying to get the SNMP Traffic to be pulled so I can monitor bandwidth of the MX Internet port and LAN ports for troubleshooting bandwidth problems. Funny thing is the SNMP Traffic works...
Tue, 10 Jun, 2025 at 4:19 PM
SQL backups and their monitoring is one of the most important things. We often talk about rather complex situations including transaction-logfiles and various other stuff.
Monitoring those things was something that did cost us to many sen...
Tue, 10 Jun, 2025 at 4:19 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to better monitor my Unix servers with ...
Tue, 10 Jun, 2025 at 4:19 PM
Hi,
Below is a solution rather than a question. Just thought I share it with the rest of the PRTG world.
Our challenge:
Projectors are having issues "out of now where" and of course always urgent - IT department didn't h...
Tue, 10 Jun, 2025 at 4:19 PM
Hello everyone
i have the script you will see bellow what i would like to do is this script be on one remote server and run on that server and simple saw me the result in prtg sensor is that thing even possible?
Import-Module ActiveD...
Tue, 10 Jun, 2025 at 4:19 PM
Hello all,
I need to verify connectivity from my fortigate 80E (Core switch in a branch office), to different hosts (being exchange servers, Internet gateway etc). I'm using a tunnel across internet to access to those hosts (via stati...
Tue, 10 Jun, 2025 at 4:10 PM
Hi.
I get this error when running the Windows Update sensor against my Windows 2016 servers:
This sensor requires the PowerShell 2.0 (or higher) to be installed on the probe system. ( Unhandled Exception: System.IO.FileLoadException: Coul...
Tue, 10 Jun, 2025 at 4:10 PM
hello i am using the following script to monitor lockout accounts
the problem is that i have locked 2 tested accounts and yet in prtg sensor, i see that value is 0 when i am running this script in PowerShell is perfect it sows all i nee...
Tue, 10 Jun, 2025 at 4:10 PM
I saw some asking for this feature by the past and i would also add my vote for such an interesting feature. i would like to know if it's taken into consideration which help to choose the right tool among the different competitors.
...
Tue, 10 Jun, 2025 at 4:10 PM
Hello team, i whant to do more "Visual" or 3rd Party notifications for PRTG, I have developments made as TTT, Phillips Hue, Sonos, and many other ways of notificate, the only thing i need is to do a GET to an URL, i need a way to ...
Tue, 10 Jun, 2025 at 4:10 PM
How can I read by using the API interface the compleet syslog message?
f.i.:
Date/Time:7/29/2019 9:11:26 AM
Source: 192.168.178.32
Message: jul 29 10:10:22 IA-PC MSWinEventLog 6 System 101 ma jul 29 10:10:21 2019 7036 Service Control Man...
Tue, 10 Jun, 2025 at 4:10 PM
I have a sensor set to do a simple SQL query. During a particular timeframe, there seems to be a conflict with other SQL jobs running on the database server. My sensor query is often chosen as the deadlock victim during that time, resulting...
Tue, 10 Jun, 2025 at 4:10 PM
Hello everyone,
Currently we have a "Notification Template" that sends a notification to a specific User-Group X when the state of a sensor of Device-Group Y changes.
Now a single User doesn't want to get the notifications...
Tue, 10 Jun, 2025 at 4:10 PM
Why do I encounter gaps in the graphs or data of my EXE sensors? Why do I get the error
Limit of 100 parallel .exe – Sensors reached?
What causes this error and what can I do about it?
Article Comments
This article applies to...
Tue, 10 Jun, 2025 at 4:10 PM
I am trying to use the ScheduledTask2XML.exe that we downloaded and installed. My current parameters are
-c="ipaddress" -t=helloworld -u=".\admin username" -p="password"
I enabled Remote Registry service ...
Tue, 10 Jun, 2025 at 4:10 PM
Hi,
in former KB questions there was described a way th change the background color of png graph export. At the moment the background is black (#000) and therefore not usable.
I know the option to add the background color to the url, bu...
Tue, 10 Jun, 2025 at 4:10 PM
We're working in a way to bring more value to data gathered through PRTG.
To accomplish this, we're indexing the data from PRTG into a third party application.
The problem is: We get data trough API. The data gathering for the Histo...
Tue, 10 Jun, 2025 at 4:10 PM
We are using the distributed PRTG and my office have two probes installed. We have full control of the probe PCs in our office but there is NO admin right of the core server PC in our HQ. When I am trying to add SNMP sensors via the "S...
Tue, 10 Jun, 2025 at 4:10 PM
Hello!
We are running a cluster of MongoDB servers in our environment, and I am interested in monitoring the response time of an arbitrary query to make sure it stays within a normal range.
With a Microsoft SQL database, I can create a ...
Tue, 10 Jun, 2025 at 4:10 PM
