kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
What is this?
What can I do?
What will Paessler do?
Article Comments
BEAST Attacks and RC4 Problems
SSL is currently afflicted with several security problems. The first one is the so called "BEAST" attack. A problem ...
Tue, 10 Jun, 2025 at 2:21 PM
Hello prtg communitiy,
I have a question regarding the small notification icons on the top (right side) of our google chrome bowser.
This status icons (new Alarms, New protokoll, ToDos, Errors, Warnings....) are registerd for our complete...
Tue, 10 Jun, 2025 at 2:21 PM
When copying over PRTG configuration from one machine to another, is it possible to copy any of these data folders?
- Logs (Debug)
- Logs (Sensors)
- Logs (System)
- Logs (Web Server)
This will not be a migration but configuration of a ...
Tue, 10 Jun, 2025 at 2:21 PM
I'm looking to install 13.2.3.2015 and read that it will restart my PRTG server, will this update also restart the server that my remote probes are installed on?
Article Comments
The PRTG Services will be stopped and restart...
Tue, 10 Jun, 2025 at 2:21 PM
Hi All,
I've just installed a PRTG trial version with unlimited sensors.
All windows computer can be detected with full information easily.
For those domain Macbook Pro users, I can see their IP and few useful information. No network ad...
Tue, 10 Jun, 2025 at 2:21 PM
Greetings:
Can PRTG be configured to somehow monitor specific networks, subnets or VLANS for potential IP address conflicts? While in good practice, this should *never* occur, I recently ran into an issue where it did - and it took our en...
Tue, 10 Jun, 2025 at 2:21 PM
I will like to be able to open the main configuration file and do a quick search and replace on all device IP addresses in a text editor such as Notepad/Notepad++. Is this allowed? If so, which file should I edit?
TIA.
Klaus
A...
Tue, 10 Jun, 2025 at 2:21 PM
I need to send a trap to a Trap Management console I have in the installation, because all troubles must be handled by SNMP.
So it´s important to me that when a sensor changes state (warning, down, etc.) the notification could be a trap se...
Tue, 10 Jun, 2025 at 2:21 PM
I have about 16 VMWaresensor.exe services that are running high cpu utilization. The server is a physical server with single 4 core 2.8 Ghz Xeon processor. This has been going on for awile just haven't had time to address it. I am in...
Tue, 10 Jun, 2025 at 2:21 PM
Hey,
im trying to import an external mib file using the prtg v2 mib importer for prtg v12.
each mib im trying to import gets the same error.
would like to get your help in how to get this mib file called SNMPv3-SMI?
thanks
john
Ar...
Tue, 10 Jun, 2025 at 2:21 PM
Why fails "processor queue length" sensor if Windows level no problem?, I have configured the windows perfmon and I do not see anything unusual.
Article Comments
Could you please provide more detail as to the issue you...
Tue, 10 Jun, 2025 at 2:21 PM
Hello,
we would like to monitor the load of our server. That every user can see before he connect how the load of the server is listed by the different RDC users.
Is that possible with PRTG?
best regards
Marco
Article Comment...
Tue, 10 Jun, 2025 at 2:21 PM
I want to be able to view warnings and alarms on my mobile device without exposing my PRTG server to the internet.
How can I accomplish this?
Article Comments
PTF MobileAlarms
MobileAlarms alows you to show alarms and warnin...
Tue, 10 Jun, 2025 at 2:21 PM
We were wondering if you guys have implemented any best practices for monitoring IBM Servers?
We found the following support forum:
https://www.paessler.com/knowledgebase/en/topic/40003-monitoring-ibm-server-hardware
Thanks,
Matt
...
Tue, 10 Jun, 2025 at 2:21 PM
I have a health check used by my loadbalancers that I'd like to track in PRTG.
the health check is a simple IIS website.
The one thing I find wierd is that the file that is loaded is a .exe.
for example the url is Http:server/perfag...
Tue, 10 Jun, 2025 at 2:21 PM
Ok, this may be beating a dead horse. I've found many articles related to PRTG/WMI sensors.
But I feel like this should work, or at least I feel like I'm way under some of the limits described in these articles.
I have a dedicated...
Tue, 10 Jun, 2025 at 2:21 PM
We have a client with three websites located in the same root (one for USA, one for Canada English [CA=EN] and one for Canada French [CA-FR]). In our IIS 7.5, we have two sites defined (one for the USA URL, the other for the Canada URL). We...
Tue, 10 Jun, 2025 at 2:21 PM
Im trying to add custom sensor for Nexus 5000 device with SNMP v3
to be able monitor device processor load, device version, some port channels
how to add custom SNMP v3 sensor? please help me
thanks!
Article Comments
To do thi...
Tue, 10 Jun, 2025 at 2:21 PM
I highlighted approx 5 or so sensors to pause, this paused all the sensors and I cant unpause them.
I have tried individual sensors and group, but they will not resume.
Any idea how I can unpause all sensors?
Article Comments
...
Tue, 10 Jun, 2025 at 2:21 PM
How can I monitor CPU and M/B temperature on the all office desktop computers?
This is possible after installing PRTG Remote Probe at each PC? Or i need to install 3rd-party software?
Article Comments
This highly depends on the ...
Tue, 10 Jun, 2025 at 2:21 PM
i have been trying to set up bandwidth/traffic snmp sensor for my asa but i end up getting a error "Unknown data type (= ) (SNMP error # -1001)". I am new to prtg can someone plz help me resolve this issue. I have enable snmp on h...
Tue, 10 Jun, 2025 at 2:21 PM
In the options I can just pause a sensor for a predefined time-frame or enter
for how long the sensor should be paused.
What I'm missing is the option to say I need the sensor being paused from
date / time until date / time.
Is that som...
Tue, 10 Jun, 2025 at 2:21 PM
i have a WINDOWS 2000 SERVER,
so i want to know what the step of CPU/RAM setting.
Thank you
Article Comments
Hi there,
You can enable SNMP in Windows 2000 by following this guide
Once this is enabled you can use Auto-Discove...
Tue, 10 Jun, 2025 at 2:21 PM
Since we have upgraded to 13.2.3 the Gmail SMTP relay does not work. The settings we have configured worked in any previous version (13.1 or below). Even running a Wireshark on the server with the Gmail settings does not show anything at al...
Tue, 10 Jun, 2025 at 2:21 PM
I was using SMTP notification delivery successfully to deliver notifications, reports, etc. It stopped working, but I don't recall exactly when. Not really critical, as this is only for my home network :)
I am using gmail's SMTP...
Tue, 10 Jun, 2025 at 2:21 PM
We would like to use PRTG for asset inventory control. We would like to perform scheduled auto discovery and use the results to see when new devices are on the network. Is there a way to auto discover devices, but not create any sensors o...
Tue, 10 Jun, 2025 at 2:21 PM
Hi,
I have implemented Netflow V9 on PRTG with Mikrotik Traffic Flow.
It is sort of working, and hence the reason I am logging this.
At the moment, all my toplists are present and being updated in 15 minute intervals. Looks fine.
Howeve...
Tue, 10 Jun, 2025 at 2:21 PM
Does PRTG support the monitoring of IKE v2 VPN's ?
Article Comments
we have not tried with IKE VPNs yet. Just give it a try with the ASA VPN sensors in PRTG
May, 2013 - Permalink
Tue, 10 Jun, 2025 at 2:21 PM
I`m trying to run my .ps1 file.
I`ve read already related my problem. but still don`t work now.
here is what I setting,
{
.PRTG Core Server Service is start in my Service(windows)
.Use default admin account and created account(admin)
.t...
Tue, 10 Jun, 2025 at 2:21 PM
Hi, I'm finding the new gauges quite handy to visually represent the health of a sensor. Unfortunately two of our sensors don't quite display that well.
They are folder sensors and monitor the age of the most recent file in the fo...
Tue, 10 Jun, 2025 at 2:21 PM
We had an issue at work with the internet connection, this caused that the servers and all sensors that we have connected to PRTG were not able to send any information, since the email server was unable to communicate either we are still re...
Tue, 10 Jun, 2025 at 2:21 PM
I am trying to check the numeric value of:
show status like 'Threads_connected';
that is returned from a MySQL database in a MySQL sensor. Can you provide some examples of syntax that works in the "SQL-Expression" for...
Tue, 10 Jun, 2025 at 2:21 PM
I have a probe set up with the address of https://familysearch.org. Iget the error of Unexpected Format: if IE 9 . I am using IE-10 . On other computers there is not this problem, also running IE-10. ????
Article Comments
Hello,...
Tue, 10 Jun, 2025 at 2:21 PM
I want to check the status of an XML REST service which has the format:
https://someservice.com/Messages?MessageDate=DD-MM-YYYY
Is it possible to substitute in a place-holder parameter with the current date?
Otherwise, do you have any ste...
Tue, 10 Jun, 2025 at 2:20 PM
Using Chrome, Paessler 'freezes' if not used for several minutes and has to be restarted
Article Comments
Please forward us an email to support@paessler.com providing details (and if possible screenshots of the issue) in...
Tue, 10 Jun, 2025 at 2:20 PM
When I create a connection line between objects, it appears with correct coloring in the designer. When I view the map via the public link, the connector line is black. Is there a solution to fix this?
PRTG v13.2.3.2014
IE v9.0.8112.1...
Tue, 10 Jun, 2025 at 2:20 PM
how do i get the same information that is in /api/getstatus.htm in /api/getstatus.xml?
For example, i would like to display all sensor counts on a display board and would like them in XML format, however, getstatus.xml does not report up...
Tue, 10 Jun, 2025 at 2:20 PM
I would like to show a sensor status on my website so that customers can see if there are any issues with our system?
I only want them to see the colours of the sensor not all of the information.
Article Comments
Hello,
yo...
Tue, 10 Jun, 2025 at 2:20 PM
Hi,
I'm trying to monitor the CPU temperature of a pair of Cisco 3925's in our network and I think I've found the correct OID using MIB Importer but when I put it into PRTG it comes back with the following error: No such objec...
Tue, 10 Jun, 2025 at 2:20 PM
Hi
I've previously used an custom ssl certificate in older versions, but in v13, there's no /cert folder, and creating one doesn't do anything, and the web UI just shows the demo certificate.
What am I doing wrong?
Thanks
...
Tue, 10 Jun, 2025 at 2:20 PM
We frequently encounter the error message "Error reading response: missing /prtg" on a bunch of our sensors, often the ones of type XMLEXESENSOR.
In our shop we have a cluster probe with two nodes.
The above error only shows ...
Tue, 10 Jun, 2025 at 2:20 PM
I saw this https://www.paessler.com/knowledgebase/en/topic/543-how-can-i-change-the-data-directory-of-my-prtg-installation
But it's not related to version 13 and I have difficult to find the "Core Server" tab.
Can you lea...
Tue, 10 Jun, 2025 at 2:20 PM
So out of the blue, our sensors are reporting false values. WMI Disk Space sensors are reporting 0% free space, pings are timing out, WMI service sensors are reporting services to not be running, it's just chaos. I have tried increased ...
Tue, 10 Jun, 2025 at 2:20 PM
I am looking to set up a sensor, for the ultimate purpose of reporting, to monitor the number of 'In Use' IP addresses for specific DCHP scopes on our DCHP server. Normally this data can be found by opening the DHCP snap-in on the ...
Tue, 10 Jun, 2025 at 2:20 PM
I was responsible for monitoring the operation of general (fans, hard disk, etc.) of the equipment Dell PowerEdge by ZABBIX tool.
However, I can not create any reliable procedure and observed in previous questions that you could provide t...
Tue, 10 Jun, 2025 at 2:20 PM
I'm not able to see where to change the properties of the downtime channel in the new version.
I think that it should be in the channels table with the configuration button, like other channels, but it doesnt appears.
We have the las...
Tue, 10 Jun, 2025 at 2:20 PM
From the probe server I can go to the command line and ping a server
example
Ping 10.0.0.1
But the ping sensor for server in PRTG comes back with a "11001 socket error". I have removed the sensor and readded it and I still get...
Tue, 10 Jun, 2025 at 2:20 PM
I have a client who works in a highly regulated environment which requires AES encryption on all SNMP communications. They are getting fed up with What's Up Gold and Orion and would like move to PRTG. Unfortunately it appears that PRT...
Tue, 10 Jun, 2025 at 2:20 PM
I didn´t find any leads on this so i try to configure NFv5 in IPCheck to monitor the VCenter solution.
So far it doesn´t work but mostly because i didn´t find any documents or how to.
Can someone give a document or point me to something...
Tue, 10 Jun, 2025 at 2:20 PM
Hi, we just upgraded to 13.2 and enabled unusual detection to see if it would work better for us now than it did when we first installed PRTG. Unfortunately it still seems rather useless.
We have approximately 2500 sensors running and rig...
Tue, 10 Jun, 2025 at 2:20 PM
I'm setting up a remote probe on a heavily VLANed Cisco network. The static IPs and Dynamic ranges have long since been lost along with the cisco passwords. Is there any reason that the remote probe needs a static IP address.
Ar...
Tue, 10 Jun, 2025 at 2:20 PM
I am looking for a way to count how many sensors where added in the last year but can't seem to find anything.
Article Comments
Hello,
open the sensor in question and then go to the History Tab.
There you should see when...
Tue, 10 Jun, 2025 at 2:20 PM
The Users Logged In sensor just tells me the number of users - which for us will always be one. I need to know the username. This has appeared before on the sensor, but I don't know how it happened and cannot repeat the behavior. Ple...
Tue, 10 Jun, 2025 at 2:20 PM
Placing a sensor down only when hit 3 requirements example: The sensor will link down if and only if the first ping and ping pind 2 and 3 do not funcinarem. The goal is to prevent the notification link is sent down based on just a ping test...
Tue, 10 Jun, 2025 at 2:20 PM
Hello,
We have application wich create standard infrastructure for each our project.
We are interested to show logs of this system in PRTG map table in format - user of current application session, time, success/unsuccess.
We can send mes...
Tue, 10 Jun, 2025 at 2:20 PM
When trying to use the automatic software update of PRTG, the "latest auto-update message" shows
Update download in progress... 102 of 103 MB
for several minutes, then it shows
Autoupdate: Error while downloading update (Re...
Tue, 10 Jun, 2025 at 2:20 PM
Some of my sensors have data that cannot be real. Example: 22,545% CPU utilization or 10,323 MBPS on a 100Mbps link.
The data throws all of the graphs out.
Is there a way to purge the data of such data?
Article Comments
For t...
Tue, 10 Jun, 2025 at 2:20 PM
Hi there,
Recently I have installed PRTG and encountered 2 issues namely:-
1. PRTG Nework Monitor - Enterprise Console section.
Error Message: prtgadmin server status is: Not connected [connection refused]
2.PRTG Network Monitor
cannot o...
Tue, 10 Jun, 2025 at 2:20 PM
What map object was used to create the status-colored display of unsolved tickets as well as the status-colored revenue display on the dashboards used in Paessler office.
Here is a screenshot:
Please see the related Blog article for...
Tue, 10 Jun, 2025 at 2:20 PM
Folks,
I'm getting a 'The remote server returned an error : (502) bad gateway' after adding a Xenserver pool to our monitoring config.
Adding the pool worked ok and it enumerated all the pool members so some kind of data tra...
Tue, 10 Jun, 2025 at 2:20 PM
Are there any limitations to the number of servers that I can install my PRTG license on to?
As I understand things, If I have a 500 sensor PRTG license, I technically could have 500 different servers that I could (for example) be pinging...
Tue, 10 Jun, 2025 at 2:20 PM
Hi,
i want to add an sensor about the Diskusage of an single Application like the ressouces monitor in Windows. Does someone can help me ?
Article Comments
I'm afraid we don't really have an answer, but maybe someone els...
Tue, 10 Jun, 2025 at 2:20 PM
Besides the schedules to pause sensors from time to time when something is down, is there a way to add an exclusion on reports? for example in this case, we had a network connectivity issue and prtg could not communicate with certain sites ...
Tue, 10 Jun, 2025 at 2:20 PM
15/05/2013 7:02:06 p.m. Database Server Error: The database disk image is malformed
cant find anything on forums about this..
Article Comments
Hello,
Could you please forward us your system log files for analysis? You can fi...
Tue, 10 Jun, 2025 at 2:20 PM
I want to understand the alogirithm behind AutoDiscovery.
How the input data is processed on SNMP Protocol?
Article Comments
Hello,
could you please be more specific?
We don't quite understand the request.
May, 201...
Tue, 10 Jun, 2025 at 2:20 PM
I have removed to program from my computer and I am still getting emails from the program about things to look at.
Article Comments
Hello,
are there still some PRTG services running on the machine?
If so, stop the services a...
Tue, 10 Jun, 2025 at 2:20 PM
Is it possible to set your "top sensors" so that they show up under the 50 that is allowed when viewing the 2day over view of the root directory?
We have all the groups sorted(which is great), but we'd like to only show out ...
Tue, 10 Jun, 2025 at 2:20 PM
I would like to know which on the sensors would be best to monitor the disk reads/writes? I have an application that is slowing down on of my server but the CPU and memory usage is low and I would like to see if it is being a disk hog.
T...
Tue, 10 Jun, 2025 at 2:20 PM
Hello
I have installed PRTG Network Monitor 13.2.5.1774 in the CORE and PROBE, the communication this established correctly and I do not see errors in logs
I check the documentation and apparently all this correct
https://www.paessler.c...
Tue, 10 Jun, 2025 at 2:20 PM
Hi,
In PRTG6 it's possible to create a sensor in "add sensor" with type "sensor Aggregation".
With and Aggregation Sensor you can add up the data of two or more sensors and create a new sensor with the aggregated r...
Tue, 10 Jun, 2025 at 2:20 PM
Is there a way to acknowledge all alarms in a group or probe?
Article Comments
Hi,
you can select the sensors by group and then just sort the resulting list after the status. Therefore got to Sensors | By Group and choose the g...
Tue, 10 Jun, 2025 at 2:19 PM
How can I trace IP Address from email addressÉ
Article Comments
Hi,
I'm afraid this is nearly impossible and even complete impossible with PRTG.
Best regards
Sep, 2012 - Permalink
Hi,
Pasting the complete email h...
Tue, 10 Jun, 2025 at 2:19 PM
Hi,
I loaded the following MIB into PRTG 'CISCO-WAN-3G-MIB' hoping to record RSSI and ECIO values. PRTG displays a value of -150 for both RSSI and ECIO. Has anyone got this working? Are there any tips to get this working. Below ar...
Tue, 10 Jun, 2025 at 2:19 PM
Hello,
We have a WMI IIS sensor that monitors number of anonymous user's but the channel only shows an option for anonymous users per second. Is there a way to edit the sensor to show just anonymous user current connections?
If i look...
Tue, 10 Jun, 2025 at 2:19 PM
Dear experts,
is it possible to use the snmp-data collected by PRTG, i. e. to import the data in Excel?
However - the data seems to be stored under "C:\ProgramData\Paessler\PRTG Network Monitor\Monitoring Database\20130522" as .pr...
Tue, 10 Jun, 2025 at 2:19 PM
Hi,
Tried to add WMI sensor "wmi volume" to server windows 2000.
The only sensor worked for me was "Free Disk Space Multi Disk".
Is it not supported on windows 2000?
Cheers
Article Comments
Hi,
due...
Tue, 10 Jun, 2025 at 2:19 PM
Hi, I´m testing right now the monitoring of our NetApp Systems with the Disk Free Sensor.
At the moment aggregates, volumes and also the snapshot space are discovered with the same disk free sensor.
My problem is that we have different warn...
Tue, 10 Jun, 2025 at 2:19 PM
as i have configured prtg now i have filled the sender email-id..but when there will be a problum where it will send report.i m not able to find where to put destination mail id where it can send notification's.
Article Comments...
Tue, 10 Jun, 2025 at 2:19 PM
I have recently installed PRTG software over VM .
And config 13000 sensors.
But I usually cannot connection webinterface .
I check windows system ,CPU and RAM utilization is very high.
Article Comments
Since this is a specific i...
Tue, 10 Jun, 2025 at 2:19 PM
PDF reports, or HTML reports don't run and I get the error: Error creating PDF report: HTML render is blank ID: 2064. Tried reinstalling the server application with no change. I've seen this posted, but no solution to the issue.
...
Tue, 10 Jun, 2025 at 2:19 PM
We have our Interfaces on our Cisco ASA's being monitored on PRTG, and our ASA and packitshaper seem to report accurate speeds, but the PRTG isn't anywhere close on the bandwidth monitoring. Any thoughts?
Thanks
Article C...
Tue, 10 Jun, 2025 at 2:19 PM
I turned off "Unusual Detection" under System/System Administration but I am still receiving email notifications for switch port sensors with a status of "Speed not reached (Traffic Total) ((>50,000 kbit/s))" and I ca...
Tue, 10 Jun, 2025 at 2:19 PM
We have many notification groups that contain email addresses of people who should receive alerts for various servers (e.g. an email group, web services group, etc.). One person whose email address is included in several different places is...
Tue, 10 Jun, 2025 at 2:19 PM
iprtg will not connect to the server from my ipad.
iprtg version 3.3
server version: PRTG Network Monitor 13.2.3.2064 x64
When I try to connect I get the message:
"cannot connect to specified host. server may be down"
I also...
Tue, 10 Jun, 2025 at 2:19 PM
Hello
We are using PRTG for monitoring, amongs other things, Juniper MX-80 router and are happy with every feature. One which would be useful would be jFlow (or sFlow) per-AS traffic graph similar to free tool as-stats (https://github.co...
Tue, 10 Jun, 2025 at 2:19 PM
In Enterprise Console on some "2 days" Graphs i see no graphics.
In Web browser i see warning:"Scan interval is longer than averages. Data is displayed with dots."
Article Comments
Hello,
the 2 day graph is...
Tue, 10 Jun, 2025 at 2:19 PM
i would like to push my alarms and notifications to NMS system (alarm aggregation system), is there a chance to have the mib file for the PRTG it self so as to install it at the receiving system
Article Comments
Hi,
I'm af...
Tue, 10 Jun, 2025 at 2:19 PM
In der %lastmessage stand vor dem Update auf 13.2.3.2064 der Benutzername anstatt der Anzahl. Wir haben das für/in eine Webseite über einen Objekt-Trigger ausgelesen und dort anzeigen lassen, damit die angemeldeten Benutzer direkt kontaktie...
Tue, 10 Jun, 2025 at 2:19 PM
When I use OS: Window Server 2008 R1, My firefox display: The connection has timed out. The server at 192.168.2.72 is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few
moments.
If you ...
Tue, 10 Jun, 2025 at 2:19 PM
I monitor a logical disk via Windows Management Instrumentation. The channels % disk read time and % write time frequently exceed 100%. Is this an error or is there another reason for this issue?
Article Comments
This article ap...
Tue, 10 Jun, 2025 at 2:19 PM
Hi,
i would like to know how much network bandwidth does a traffic sensor typically used for SNMP monitoring? The reason for this question is to know how much network traffic does PRTG consume in a shared leased line.
Thanks
Art...
Tue, 10 Jun, 2025 at 2:19 PM
Hi,
due to security reason, PRTG will not be able to ping to the devices. Can PRTG proceed to discovery them purely based on SNMP?
Thanks
Article Comments
The method that is used to Auto-Discover devices on a network is des...
Tue, 10 Jun, 2025 at 2:19 PM
Since we upgraded to latest version, we've been noticing the following error.
Our NOC, which just displays maps, does not get this error. However if we start to navigate around, look at specific devices, etc, we start seeing the error ...
Tue, 10 Jun, 2025 at 2:19 PM
Hallo Support-Team,
die Sensoren zum Monitoring der Festplatte stellen die Restkapazität immer als 'absolute' Werte dar (MB oder % von Gesamtgröße). Ist es möglich, über die Intervallwerte eine Vorhersage über die 'Restlaufzeit ...
Tue, 10 Jun, 2025 at 2:19 PM
HI,
i want to check the free space of hard disk, if free space is less than 50% of totalspace avilable, then it sends a mail or message to the mobile. this is used for continuous monitoring of free space. by the using of COMMAND PROMPT,...
Tue, 10 Jun, 2025 at 2:19 PM
The data graphs in PRTG are empty or have gaps. They show strange values. What can I do?
Article Comments
This article applies to PRTG Network Monitor 12 or later
Graphs in PRTG
The normal Data view of PRTG offers up to four...
Tue, 10 Jun, 2025 at 2:19 PM
We are currently running a trial of PRTG and everything is going well so far
One of our requirements for our monitoring solution is that we must be able to provide access to external customers, however this must be extremely limited to ce...
Tue, 10 Jun, 2025 at 2:19 PM
I would like to be able to remove sensors in mass. I have approx 70 servers and I do not need pagefile size, or memory size on every server. But I hate to waste time trying to manually remove every one from every server. Can you help? A...
Tue, 10 Jun, 2025 at 2:19 PM
we use prtg to monitor the temperature on different places.
when designing a map, I can only choose for the following timespans for graphs:
- Live graph
- 2 days
- 30 days
- 365 days
I got multiple request for different timespans
- 24 hou...
Tue, 10 Jun, 2025 at 2:19 PM
Hello!
I have a problem with remote probes sporadically losing connection to the PRTG Core server. Their logs show something like this:
27.09.2012 10:55:23 Login OK: Willkommen bei PRTG
30.09.2012 13:08:05 Disconnected from 10.2.9.34:...
Tue, 10 Jun, 2025 at 2:19 PM
