kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi sir/Mdm,
My non-profit organisation is currently evaluating PRTG.
A requirement by my supervisor is the ability to generate a daily log reporting the usage of in and out (to internet) bandwidth/traffic per user/ip.
In sFlow Top Char...
Tue, 10 Jun, 2025 at 2:13 PM
We are going to be managing our sensors more through libraries now because of the flexibility it gives us with notifications. However the library creation process is still a bit cumbersome. Being able to add sensor to a specific library and...
Tue, 10 Jun, 2025 at 2:13 PM
I have just upgraded to PRTG Network Monitor 13.3.4.2527 x64 and a 'HTTP XML/Rest Value sensor' that worked fine with the previous version has started to report a 'Response not wellformed - (code: PE132)' error
The xml res...
Tue, 10 Jun, 2025 at 2:13 PM
How does PAESSLER recommend setting up a multi-site PRTG monitoring environment with alerting? I have about 20 sites each with about 2K sensors. The current setup is central server, the rest remote probes.
This seems to case some issues ...
Tue, 10 Jun, 2025 at 2:13 PM
Hello,
I have several custom sensors, that check various things but I was wondering if there was a way of returning the value when the condition is in an error state? When the sensor is up and green, it returns the value to the device ov...
Tue, 10 Jun, 2025 at 2:13 PM
After updating to 13.3.4.2479, the Channels of a Sensor data tables no longer display data in my Maps. The data does exist and is being collected, you can see it if you go to the actual sensors manually, but it shows up blank in the Maps. M...
Tue, 10 Jun, 2025 at 2:13 PM
We have our system separated with multiple remote probes and a local probe (Web Server). The local probes stay around 50 threads but our remote probe that does the bulk of our checking is running in the low 500s. Is this an issue means it...
Tue, 10 Jun, 2025 at 2:13 PM
Hi. I have multiple vlans on an interface on a cisco ASR 901 router. Is there any way to monitor each vlan on the single interface with prtg?
Article Comments
Hello,
thank you very much for your KB-Post. May I ask you to pleas...
Tue, 10 Jun, 2025 at 2:13 PM
Hi Guys
I've just starting using PRTG.
I setup netflow to monitor router traffic , but I really want to monitor bandwidth usage (as a % if possible) between 2 wan routers. I've configured netflow on the routers and im using the ne...
Tue, 10 Jun, 2025 at 2:13 PM
Hi there,
I'm trying to delete an old admin (the one who set up our PRTG originally and am unable to. I am an administrator and can delete any other user but his account does not have a delete button next to it. When I try to delete...
Tue, 10 Jun, 2025 at 2:13 PM
We have a couple of devices that we know are not always on. We have setup notifications to alert us if the device has been down for a full 2 days. However an alarm appears straight away on the alarm screen. Is there any way of making the al...
Tue, 10 Jun, 2025 at 2:13 PM
At the moment whatever I type under location becomes the label for the locator. However the town name or lat/long isn't necessarily the best label text. A post from 2010 says this feature will be available in Q2. If so, how do you do it...
Tue, 10 Jun, 2025 at 2:13 PM
Hi,
I am trying to monitor a new 2012 server for the Event ID of 2213. This is within the DFS Replication log. I realise I can use either the WMI or Windows API event sensors to monitor logs. However neither of these seem to do what I ne...
Tue, 10 Jun, 2025 at 2:13 PM
Hi
I want to add a top-communicator list of our WAN-Traffic Sensor to a map, but it's not working.
If I try to add it, the object is incopatible or it's just blank without any data.
I've tried it with graphs, datatables and th...
Tue, 10 Jun, 2025 at 2:13 PM
How can I use the Vitality Sensors? I do not find them in the WMI Sensors list nor by searching for vitality.
Article Comments
Hi,
please use the WMI Vital System Data Sensor. Just search for vital when trying to add the sensor...
Tue, 10 Jun, 2025 at 2:13 PM
Is it possible to change the path of a SMB diskspace sensor? I used to query the admin shares (c$, d$ and so on) but our server guys have now decided that these are not to be used anymore, deactivated them and replaced them with read-only s...
Tue, 10 Jun, 2025 at 2:13 PM
Hello,
I would like to monitor Oracle database services on linux server from PRTG. Can anyone tell me how do I do it ?
Article Comments
You can monitor processes in Linux via the snmpd.conf configuration. List the process nam...
Tue, 10 Jun, 2025 at 2:13 PM
Hello Paessler Support,
we've had trouble with the connection to one of our subsidiaries. The effect is intermittent loss of connectivity which results in a disconnection of the remote probe.
In these cases I have had an effect whe...
Tue, 10 Jun, 2025 at 2:13 PM
When I add an INI File monitor, it works fine as long as the value is a whole number. If the value is a decimal (ie. 88.2) the value returns as -1. If I change the value in the ini file to a whole number it then displays correctly. I hav...
Tue, 10 Jun, 2025 at 2:13 PM
Does the Auto Acknowledge feature only rests with PING sensors? because we have tried with other sensors and it didn't worked out. Although, we got the notification but the alarm didn't went into Acknowledge state.
Article ...
Tue, 10 Jun, 2025 at 2:13 PM
Using v. 13.2.3.2064 x64, I am testing using auto-discovery. I have created an auto discovery group using the IP and subnet option. I know the subnet I'm entering has devices but when I create the group it hangs at 0% and does not seem ...
Tue, 10 Jun, 2025 at 2:13 PM
I have SNMP traffic sensor with Traffic In and Traffic out channels.
I set up limits for those channels:
Uppper Error (kbit/s): 300000
Upper Warning: 250000
Lower Warning: 5
Lower Error: 1
Although traffic load is bellow the Upper Warning...
Tue, 10 Jun, 2025 at 2:13 PM
Can PRTG give my a history of bytes that have been backed up using this method? - https://www.paessler.com/knowledgebase/en/topic/47023-how-can-i-monitor-my-backup-software-to-be-sure-backup-succeeded-last-night
Example: https://www.dropb...
Tue, 10 Jun, 2025 at 2:13 PM
Hello,
We have 5 hardware sensors for Vmware - it's almost a 100% reproducible crash. When logged into the prtg server I refresh the sensor, watch vmwaresensor25.exe cycle to around 50-75 cpu usage - then werfault.exe takes over and r...
Tue, 10 Jun, 2025 at 2:13 PM
Could not log in using the specified credentials. Please make sure they are not only valid for the t
Hi Guys,
Can somebody please shed some light on this.
This error is on a server with 5 sensors. Rest 4 sensors work fine. only the CPU load sensor is giving the above error since 10 days. I have tried to re added the sensor, still the er...
Tue, 10 Jun, 2025 at 2:13 PM
We have two servers in cluster. Cluster communication operates normally but on Sensor Probe Health (Cluster Probe Device) I can see Last Message: Disconnected on both servers. The Sensor has green color but this message is alarming. Should ...
Tue, 10 Jun, 2025 at 2:12 PM
Hi,
We use Konica Minolta printers and some of devices (for example, 40P or C25) not directly
displayed consumbles OIDs as a %, you must calculate the value from two OIDs.
Example:
1.3.6.1.2.1.43.11.1.1.9 current level
1.3.6.1.2.1.43...
Tue, 10 Jun, 2025 at 2:12 PM
We are using PRTG to monitor the Sonicwall Interface bandwidth, traffic, CPU & Ram utilization, togther the ping time from our main office to the branch office.
We have only one firewall and one gateway. Thus, the ping time traffic mu...
Tue, 10 Jun, 2025 at 2:12 PM
Hallo!
Habe ein kleines Problem!
Wir verwenden den PRTG Network Monitor 8.4.1.2283!
es werden mehrere Server mit SMTP POP3 Round Trip kontrolliert, nur bei manchen Server funktioniert es nicht.
Als Nachricht bekomm ich nur: Sending ...
Tue, 10 Jun, 2025 at 2:12 PM
I have our Vmware Vcenter 5.1 in PRTG. I am getting "Timeout causes by wait for mutex (code: PE121)". I want to separate the host checks from the client checks to two different probes, but when I cloned the Vcenter item, and del...
Tue, 10 Jun, 2025 at 2:12 PM
Hello, is it possible to have PRTG Network Monitor extract the different log tables from the Linksys routers, specifically the rv082? I would like to automatically monitor the outgoing and incoming log tables and tabulate the ip addresses, ...
Tue, 10 Jun, 2025 at 2:12 PM
I have changed the Ip address of one of my devices and all the sensord say "No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (erreur SNMP # -2003)"
Article Comm...
Tue, 10 Jun, 2025 at 2:12 PM
Remote probe cannot connect to core.
I have upgraded the probe via the prtg web console.
Turned off the firewall.
What else can i try? I assume the handshake has something relating to versions. But both server and probe are on the sa...
Tue, 10 Jun, 2025 at 2:12 PM
I have SSL cert expiry sensors setup for several websites. I have a threshold trigger set to notify me when the cert will expire in less than 90 days. I have a cert that is 101 days overdue and it will not trigger a notification. I have ...
Tue, 10 Jun, 2025 at 2:12 PM
Im Map-Designer kann für ein Objekt ein externer Link eingegeben werden. Jedoch wird dieser immer im selben Fenster geöfnet, so dass die grundlagende Ansicht verschwindet. Optimal wäre ein neues Fenster, dass auf einen zweiten Monitor gezog...
Tue, 10 Jun, 2025 at 2:12 PM
All of the relevant documentation I find, says the credentials should be Windows Domain Administrator. These credentials seem exceedingly high for Performance Counter monitoring. Are there more restrictive credentials that we can use instea...
Tue, 10 Jun, 2025 at 2:12 PM
Hi,
Maps are great, I love them. But working with them can be a royal pain. A few nice to haves for the maps:
- "automatic" links to the object. It's impossibly tedious to first put down all your objects (eg graphs of senso...
Tue, 10 Jun, 2025 at 2:12 PM
Good morning
We have a single core PRTG server with several remote probes installed on servers behind routers and firewalls on separate subnets.. We have around 700 sensors all working fine (monitoring things like SQL databases, services,...
Tue, 10 Jun, 2025 at 2:12 PM
I have more than 100 sensors on a device, so the sensor page is paginated. When I check-all and click delete, it will only delete the sensors on the current page. Is there a way to delete all sensors on a device?
Article Comments
...
Tue, 10 Jun, 2025 at 2:12 PM
Is it possible to make the connectors go red only when the Ping Sensor is down? Also, can you make the red more visible, the red indicator of the line doesn't even reach half of the line plus the red color is very light. Another concern...
Tue, 10 Jun, 2025 at 2:12 PM
I have two nodes set up as a cluster, one node (primary) in the UK and the slave in the US.
I can add sensors to the local probe on the primary so I can check services on it, but I can't seem to find how to monitor services on the sla...
Tue, 10 Jun, 2025 at 2:12 PM
I know there has to be a simple answer to this one, but I can't for the life of me figure it out...
Running ESXi 5.1. Now, under the root settings for VMWare/XenServer, I can put in the credentials for accessing the VMWare.
Howev...
Tue, 10 Jun, 2025 at 2:12 PM
Ok I have the custom sensor SDUsageXML.exe which I have copied to Custom Sensors\EXEXML
I also have the Token tool. What I am missing (and don't understand) is how I determine the SensorID or ObjectID
Thanks.
Article Commen...
Tue, 10 Jun, 2025 at 2:12 PM
I'm adding some custom Perf Counter sensors, and a few of the counters have '>' and '<' in their names. Here's an example:
\[Category]\Responses <= 250ms
Putting that into PRTG doesn't work. I can m...
Tue, 10 Jun, 2025 at 2:12 PM
Our broadband is Symetric broadband with bandwidth 4 Mb Upload/Download.
Today, we had done a Lync meeting and when we check the bandwidth usage of the Sonicwall Interface, we found that some of the total bandiwdth usage is reach 6 Mb!
...
Tue, 10 Jun, 2025 at 2:12 PM
Guten Tag.
Wir benutzen PRTG 13.2.3.2285.
Wir möchten eine Map mittels iframe auf einer Intranetseite präsentieren.
Ist es möglich diese Refresh Intervalle zu ändern oder auszublenden?
Außerdem stört die Scrolleiste. Kann ich die auc...
Tue, 10 Jun, 2025 at 2:12 PM
My PRTG server is not accessible from the internet, but still I would like to show some of my sensors to the public, like on Ducksboard. How can I do this?
Article Comments
PTF.Ducksboard
This is possible with Custom Sensor PT...
Tue, 10 Jun, 2025 at 2:12 PM
Hello,
I would like to test an authentication on a Website:
I have an url : http://diog.aem.com
In this page , I can Log with a username and password and continue the navigation and the url http://www.diog.aem.com/index.php?task=search is ...
Tue, 10 Jun, 2025 at 2:12 PM
Our company has 3 branches, working seperately. We want to know that if we can use one PRTG licence for monitoring the three different networks or not?
Article Comments
This would be possible using so-called remote probes. What ...
Tue, 10 Jun, 2025 at 2:12 PM
I need to create a report (or alternately a "map" displayed as an html page) which shows each sensor which has been down for the past 24 hours, it's current state (up,down,warn) and the total amount of time it has been down. ...
Tue, 10 Jun, 2025 at 2:12 PM
I'm running PRTG 13.3.4.2604, and setup the POP3 Roundtrip sensor. However, its status always shows down with the messages "Maximum Trip Time exceeded (giveing up)" or "Unexpected connection drop (code: PE039)".
I...
Tue, 10 Jun, 2025 at 2:12 PM
We would like to be able to describe a service that is composed of different device/sensors and be able to notify when one or many devices change status but only get one notification. I have looked at dependencies but we do not like how it...
Tue, 10 Jun, 2025 at 2:12 PM
Hi,
I would like to monitor a specific usb dongle used for a certification's service.
The customized sensor developped by Gerard Feijth don't work in this case because it is not a storage usb device.
Is it possible to monitor a sp...
Tue, 10 Jun, 2025 at 2:12 PM
Changed proxy setting and now PRTG isnt working.
Starting Ent. console gets a Information window indicating the proxy needs authentication and I need to select 'Manual Proxy configuration'.
Once the console is open, I select options...
Tue, 10 Jun, 2025 at 2:12 PM
We need to create user specific Maps and Reports as per the user requirement. The report should be visible to him only ( and administrators) and he should have the facility to edit as per his need. Please note he is not an administrator.
...
Tue, 10 Jun, 2025 at 2:12 PM
We are currently running version 12.4.5.3165 of PRTG with version 13.3.4.2605 being the latest available. We are looking to upgrade however I'm struggling to find info on what new features have been introduced and what bugs have been re...
Tue, 10 Jun, 2025 at 2:12 PM
Hei You,
I created a map in PRTG, everything is fine, but my question is, is it possible to put that map in a Microsoft word document, I know I can save the Image and put it in my document but I'd like to have a real view on it. So ever...
Tue, 10 Jun, 2025 at 2:12 PM
Hi,
This is my first attempt to work with the SNMP trap receiver probe, so it's probably a configuration problem but I coudn't get it to work.
I Installed several SNMP trap receiver probes on my PRTG Local Probe Device with diff...
Tue, 10 Jun, 2025 at 2:12 PM
I've receive Overhead Protection is Active alert, when I tried to find the problem in server log, it show:
2013-08-02 00:00:49 127.0.0.1 "anonymous-admin-login_failed_and_delayed_120_seconds" 127.0.0.1 8085 GET /api/table.csv ...
Tue, 10 Jun, 2025 at 2:12 PM
Our PRTG triggers are not sending emails/SMS, but when you test the notifications, everything comes through fine. Everything was working previously, nothing has changed but it's notifying down OR up.
Anything I could be missing?
...
Tue, 10 Jun, 2025 at 2:12 PM
hallo!
ich möchte gerne die grenzwerte für warnungen/fehler anpassen.
kann ich das irgendwo global einstellen (CPU, RAM, Festplatte...) oder muss ich das bei allen devices manuell im jeweiligen sensor ändern ?
besten dank
Artic...
Tue, 10 Jun, 2025 at 2:12 PM
Hey, I can not create graph map. Previously this has not been a problem, but after we reinstalled the server and PRTG it is not possible. We have ver. 13.3.4.2605
Using Chrome Version 28.0.1500.95 m
Nor is it possible in PRTG Network Monito...
Tue, 10 Jun, 2025 at 2:12 PM
Hallo zusammen,
ich habe wiedereinmal eine Frage zum Thema PRTG Map.
Es geht um die PRTG Version 13.3.4.2605.
Scheinbar versucht eine öffentliche Map die im Internet Explorer angezeigt wird, eine SSL 3 Verbindung zur PRTG Probe herszust...
Tue, 10 Jun, 2025 at 2:12 PM
I want to use the NTML authentication protocol for my Apache servers, but it doesn't work. Is there any workaround to apply NTML authentication to Unix-based webservers without problems?
Article Comments
This article applies...
Tue, 10 Jun, 2025 at 2:12 PM
Hi,
I am using PRTG on my windows network. The tool looks good but some questions:
1) I'd like to use the "System Health" and "Core Health" probes on my normal member servers. I am told I need to have a probe dev...
Tue, 10 Jun, 2025 at 2:12 PM
I have a XML sensor that simply returns the value of a node, so most of the time it will display
value of node result is SUCCESS or something very close to that, however when something goes wrong and the xml value changes to FAILURE and t...
Tue, 10 Jun, 2025 at 2:11 PM
Hallo!
Unser PRTG Monitor 8.4.1.2283.
Ich habe Probleme mit der Überwachung von Sessions von Fortigate 40C
Habe die MIBs von der Fortigate Seite heruntergeladen.
Mit der OID fg ip sess number: 1.101.11.2.2.1.1 habe ich einen Sensor...
Tue, 10 Jun, 2025 at 2:11 PM
Often, PRTG updates include several new sensor types as I can see in the release notes. But when I want to add them to my PRTG installation, I just cannot find these new sensors. Are they hidden or not available by default? Of course, I run...
Tue, 10 Jun, 2025 at 2:11 PM
I had PRTG running for over 6 months now, I had this monitor the firewall with all the ports including the 1 LAN, and 3 WAN. No setting has been changed on the firewall and on 7/29, all of sudden, I'm getting this message No response (...
Tue, 10 Jun, 2025 at 2:11 PM
Hi all
I have some trouble to configure the AD integration. I follow this explanation
https://www.paessler.com/manuals/prtg/active_directory_integration.htm
But When I try to configure AD groups, PRTG display an error :
"The vali...
Tue, 10 Jun, 2025 at 2:11 PM
If you populate the location field of a group via the API the geomap picture doesn't display the correct location. To make it correct the map you have to go to the group location box and press enter.
Article Comments
Dear An...
Tue, 10 Jun, 2025 at 2:11 PM
When I use the API to add GeoMaps coordinates, every group is plotted off the west coast of Africa. I have to go into the group, click after the last number, press space, then backspace and it will plot correctly.
I have had this happen o...
Tue, 10 Jun, 2025 at 2:11 PM
I would like to review raw logs for an sflow sensor, so I can find the interface index. I can't find where to enable the raw logging. Thanks.
Article Comments
Hi,
due to some special behaviour of the sFlow sensor the option...
Tue, 10 Jun, 2025 at 2:11 PM
It doesn't seem to be possible to setup a different audible alert for disappearing alerts. Is there any workaround for this? Because it seems like such a simple feature yet so effective.
Article Comments
Do you mean for the ...
Tue, 10 Jun, 2025 at 2:11 PM
I have successfully connected to L-Com (http://www.l-com.com/wireless-network-l-com-outdoor-cpe-wireless-access-points) AP's using PRTG, I can monitor 'up-time' on the device(s). I would like to monitor bandwidth usage. The GU...
Tue, 10 Jun, 2025 at 2:11 PM
Currently we use Cacti to monitor low volume counters. eg counting the number of network switches we have once per day or the number of interfaces up vs down each hour. These type of counters are useful to trend over 5 years+ to judge expa...
Tue, 10 Jun, 2025 at 2:11 PM
During the process of setting up all devices, and watching servers for any new additions, I'd like to run a weekly autodiscover against all my network items, with the detailed sensor creation. But I need them to be created in the Pause...
Tue, 10 Jun, 2025 at 2:11 PM
Hallo!
wie kann man den Hyper-V-VMMS Eventlog, wenn ein Fehler auftritt überwachen?
Ist in der Ereignisanzeige unter: Anwendungs- und Dienstprotokolle\Microsoft\Windows\Hyper-V-VMMS zu finden.
LG
Florian Liebmann
Article Comme...
Tue, 10 Jun, 2025 at 2:11 PM
I downloaded the PRTG MIB importer and the Juniper MIB library, but cannot find the correct OID for SNMP traffic. Anyone help?
Article Comments
Hello,
thank you very much for your KB-Post. Can you please send us the MIB-Files...
Tue, 10 Jun, 2025 at 2:11 PM
Hi All
Is it possible to change in Setup > Probes
The IPs for probe Connections
My PRTG server has two network card on two separate network and I want to monitor devices on both network.
Article Comments
Hello,
th...
Tue, 10 Jun, 2025 at 2:11 PM
Is it possible to monitor the copy of a file from one server to another ? and get the speed of the t
Hi all
I want to know if it's possible to have the performance / speed of the copy of a file from one server to another ? and get the speed of this transfert ?
Thank you all
Article Comments
The only way that you would b...
Tue, 10 Jun, 2025 at 2:11 PM
Where can I see a list of all confirmed new features and fixes of upcoming versions?
Article Comments
I'm afraid such a list is not available. Sorry.
Aug, 2013 - Permalink
You can see some of this information in the ...
Tue, 10 Jun, 2025 at 2:11 PM
Is there a way to group various itens and use this group to represent a business item ? Some thing like grouping :
1 - Router, Switch, Firewall, and Link to describe a Internet Connection ?
2 - Web Server, Application Server, Database Se...
Tue, 10 Jun, 2025 at 2:11 PM
I save the script below as a BAT file in "EXE" folder of probe, and then I setup EXE/SCRIPT sensor. Why it is still return "OK"? Thanks.
IF "2" EQU "2" (
ECHO 2:ERROR
EXIT /b 2
) ELSE (
...
Tue, 10 Jun, 2025 at 2:11 PM
I'd like to monitor for Exchange 2010 responsiveness to Outlook Anywhere requests (RPC over HTTP). Can this be done?
Article Comments
Hi,
there is no native sensor to do so. You might look into the EXE/Script (Advanced) se...
Tue, 10 Jun, 2025 at 2:11 PM
If I like to use PRTG as a service provider, I need to have displays which run the whole day and show me alarms overall customers. I don't want for every customer a display to separate the alarms. So therefore the alarm maingroup is a g...
Tue, 10 Jun, 2025 at 2:11 PM
I get an error code on my sensor imap 1: Connection Refused Socket Error # 10061 in the Enterprise Console. I have tried fixing by matching settings: https://www.paessler.com/knowledgebase/en/topic/333-how-do-i-solve-a-connection-refused-s...
Tue, 10 Jun, 2025 at 2:11 PM
I have the syslog sensor set up on my probe device. But I am not getting any information on it. (Right now Im getting 0 for all data) I have 4 devices that I want information to show on the syslog. How can I add them to the syslog?
...
Tue, 10 Jun, 2025 at 2:11 PM
We encountered a series of alerts from one server related to WMI timeouts. The appearing error message in these cases is WMI request timed out unrecoverable. If the problem persists with this sensor, consider pausing or deleting it. (code: ...
Tue, 10 Jun, 2025 at 2:11 PM
Does PRTG allow you to RDP and telnet to devices in a remote network, that are not accessible on the internal network using the ssl tunnel from the remote probe as a proxy to make a secure connection to the remote device?
Article Co...
Tue, 10 Jun, 2025 at 2:11 PM
Regarding SMTP sensors, if multiple IPs are returned for the MX record, does the PRTG SMTP sensor tr
If the PRTG SMTP sensor does try all IPs in the mx record given, is this behavior occur in all versions of PRTG, specifically version 8?
Also, if the sensor only tries one IP, is there a way to configure this to try all IPs in the MX retu...
Tue, 10 Jun, 2025 at 2:11 PM
Ich nutze den PRTG über die WEB-Site (Ajax). Der Server selber ist im anderen Standort. Um die NTP Appliance von Meinberg zu integrieren, würde ich gerne die MIBs installieren. Den Mib Filer habe ich heruntergeladen.
Kann ich den MIB fil...
Tue, 10 Jun, 2025 at 2:11 PM
Guten Tag,
wir haben aktuelle eine PRTG Installation auf einem Server in einem von zwei zentralen deutschen Standorte. Von diesem Server aus bedienen wir unsere weltweiten Standorte mit zwei Teams (landerspezifische Verantwortichkeiten). ...
Tue, 10 Jun, 2025 at 2:11 PM
I'm not able to discover a class B network. In this case 172.25.0.0, subnetmask 255.255.255.0
according to the thread at https://www.paessler.com/knowledgebase/en/topic/14303-automatic-search-class-b-network, dated January 13 2011, th...
Tue, 10 Jun, 2025 at 2:11 PM
Is it possible to edit the menu items that user can see? For example, when a user logs in I don't want them to see anything other than the list of sensors they have access to, and a couple reports that were created for that user. I d...
Tue, 10 Jun, 2025 at 2:11 PM
After restoring an automated backup, is there a programmatic way of restarting PRTG probes? (Instead of using the PRTG Probe Administrator GUI).
Article Comments
Hi,
you might do this with
net stop PRTGProbeService
net st...
Tue, 10 Jun, 2025 at 2:11 PM
Hello PRTG community,
We have a small but important problem with snmpv3 and our new HP Switches. (HP5900, HP5800).
Because of our redundancy concept we have to monitor individual Ports and this we can do with snmp traffic Sensor!
When we a...
Tue, 10 Jun, 2025 at 2:11 PM
We have a server with 2 x 8 core CPU installed, this server is HT enabled so PRTG detect 32 processor in CPU Load Sensor.
We decided to disable HT so the number of processor with be decreased to 16. However PRTG still display 32 processor....
Tue, 10 Jun, 2025 at 2:11 PM
We are using PRTG version 13.3.5.2685. We are running Windows 2012 SCVMM and have 11 hosts configured. We have set the scan time from 5 minutes to 10 minutes which did decrease the CPU load but every so often we still get these errors.
...
Tue, 10 Jun, 2025 at 2:11 PM
I have new machines with Adaptec RAID 7805. There are no mib files. How I can moitor the RAID?
Article Comments
The first thing that you can do is use the SNMP tester to see if there are any OID's available to monitor and th...
Tue, 10 Jun, 2025 at 2:11 PM
