kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I've read many posts on here and keep reading different answers. What's the max # of WMI based sensors one probe can host safely?
Article Comments
Dear PRTG user
Because it depends on so many factors, even a rough est...
Tue, 10 Jun, 2025 at 1:44 PM
Hello Paessler,
Is there a possibility to know which devices became reachable (based on ping sensor) respective a previous report?
For example: I have 400 devices which I have to report to my management (they have only Ping sensors). Wh...
Tue, 10 Jun, 2025 at 1:44 PM
Hello,
i have two servers 2008 r2 that keep getting 'Class(es) not found: "Win32_PerfRawData_PerfProc_Thread" ' errors (sensor Thread: Context Switches/sec _Total/_Total)
restarting the WMI service temporary resolve the is...
Tue, 10 Jun, 2025 at 1:44 PM
I'm running version 14.2.10.2114 and have the SonicWALL VPN Traffic sensor available. When I try to add a new sensor it only shows me about 25% of the currently active VPN tunnels I have established on my SuperMassive 10200 SonicWall. ...
Tue, 10 Jun, 2025 at 1:44 PM
Hi there,
when I activate the SNMP service on the new TeraStation NAS 3400R, PRTG can not find the hard drive / LAN sensors.
The server runtime is read out right. The hd space sensor and the LAN sensor is not displayed. A sensor with ...
Tue, 10 Jun, 2025 at 1:44 PM
Hi everybody, i don't speak english very well, so forgive me please.
I need help, when i make a custom performance counter, i have this error:
" error custom performance counter 0xB0000005"
thank you in advance.
Ar...
Tue, 10 Jun, 2025 at 1:44 PM
when I ping at command line, it works but in prtg, it shows the system is down 'icmp error #1231'.
It was working almost without any error.
what can be the problem?
Article Comments
Hello,
thank you very much for y...
Tue, 10 Jun, 2025 at 1:44 PM
Is it possible to get a notification if any sensor is paused or deleted?
Article Comments
Unfortunately there is no way to do this with PRTG. One of the main points of a paused sensor is to not send out notifications. Also, wi...
Tue, 10 Jun, 2025 at 1:44 PM
I have an APC Smart-UPS 1500 that I am monitoring using PRTG.
I have added the APC ups.oidlib SNMP library and it reads information from the UPS OK but how do I get the sensor to error when the input power to the UPS fails?
The input power ...
Tue, 10 Jun, 2025 at 1:44 PM
We are currently trying to use the PRTG for Android mobile probe. The overall goal is to have the device (along with others eventually) on a Geo-Map with other stationary devices, to show the moving location of dispatched technicians during...
Tue, 10 Jun, 2025 at 1:44 PM
I have an IIS Application Sensor where I alert on bytes Sent > 4mbps. The sensor is scheduled from 5am-midnight. At the same time the IIS server is scheduled to start IIS at 4:59am. The probem I am having is that every morning I get an a...
Tue, 10 Jun, 2025 at 1:44 PM
Hello Paessler,
I am using PRTG Network Monitor 14.2.9.1799 x64, but I cannot see in the settings, the control of how many days the PRTG should store the Graph information.
I remember I have set it to 360 days, but I cannot find it afte...
Tue, 10 Jun, 2025 at 1:44 PM
Hi everyone!
When I do an auto discover on my windows servers, the WMI memory shows as "% of Free Memory" which drives my co workers crazy since they are so used to seeing memory shown as "% of Used Memory".
Is there...
Tue, 10 Jun, 2025 at 1:44 PM
Hello,
I have 25 remotes probes and over 5000 sensors and the installation is slow.
I have read this:
https://helpdesk.paessler.com/en/support/solutions/articles/76000041624-how-can-i-speed-up-prtgespecially-for-large-installations
Bu...
Tue, 10 Jun, 2025 at 1:44 PM
I have a File Content Sensor that is receiving No Data after updating PRTG from 13 to 14
Article Comments
I tried recreating the sensor and get the same results. The sensor was functioning properly before the update. The share i...
Tue, 10 Jun, 2025 at 1:44 PM
Hi,
We have just created a custom sensor calling a ps-script.
The result is a list of usernames and a number count.
Now all PRTG is showing in "Last Message" ist the number count but not the usernames.
If i check for the logs on...
Tue, 10 Jun, 2025 at 1:44 PM
hi, i lost my commercial edition, and i need to install prtg on a new server, where and how i can download a commercial edition.
thanks.
Article Comments
Dear user
Please log into the webshop (https://shop.paessler.com/accou...
Tue, 10 Jun, 2025 at 1:44 PM
I'm starting to look into editing the HTML templates in order to customize our reports that we would like to start providing to our clients. However, we're running into a bit of a problem with how to organize the data. We would li...
Tue, 10 Jun, 2025 at 1:44 PM
Hello!
I have a PRTG machine with 5600 sensors and I want to change the standard value for the sensor "System Health Temperature" (snmp). It´s all the same hardware (Cisco switches)
All existing sensors for temperature should...
Tue, 10 Jun, 2025 at 1:44 PM
What is the easiest way to monitor drivespace on a CIFS server running on a EMC VNX system. I'm just looking to monitor the drive space. The CIFS servers on the VNX emulate a windows server but I can't seem to connect a monitor to...
Tue, 10 Jun, 2025 at 1:44 PM
Hello, I need the installer version 13.3.5.2685 how can I get it ?
Thanks
Article Comments
Hello,
I am sorry, we only provide the current version for a download. If you have an old 13.3.5.2685 installation, please have a loo...
Tue, 10 Jun, 2025 at 1:44 PM
I need to determine what objects (groups/devices/sensors) are associated with what schedule.
Is there a way to export a list containing all schedules which all objects associated to each schedule?
Thanks for your efforts.
Article ...
Tue, 10 Jun, 2025 at 1:44 PM
Hi, we are managing an ISP network in Uruguay and we would like to get any tool to measure and controlo how many bytes are consumed for some special clients.
We can set the maximum speed for downloading, but our Sales Team wants to deploy...
Tue, 10 Jun, 2025 at 1:44 PM
Hi,
After an update to version 14.2.10.2114 of PRTG, I now seem to have a lot of up log entries. But no where is there a warning or down, this is happening on 3 different PRTG systems.
Article Comments
Hello,
thank you very...
Tue, 10 Jun, 2025 at 1:44 PM
We are adding sensors to libraries via tags successfully. The issue is when the tag is removed from a sensor the sensor is not automatically removed from the library.
Shouldn't the sensor supposed to be automatically removed?
Cur...
Tue, 10 Jun, 2025 at 1:44 PM
Is there any way to get the device and properties from an item on a map?
e.g. click on the item and find "This is a Status Icon > Primary Channel Gauge Small" and the data is coming from "Server Group 2 > Server 4 >...
Tue, 10 Jun, 2025 at 1:44 PM
One of my servers is a CA for internal certs. Is there a sensor that can monitor all the issues certificates from this box?
Article Comments
Hello,
I'm afraid such a sensor is not available in PRTG as a native sensor in t...
Tue, 10 Jun, 2025 at 1:44 PM
Dear Support,
There are some WMI sensors in our deployments (such as Windows CPU Load and WMI Free Disk Space) which at sometimes, have channels added to the sensor. As an example: a 1 CPU core target could suddenly display having 2 CPU c...
Tue, 10 Jun, 2025 at 1:44 PM
Hello,
I have two PRTG server standalone, each other the same version 13.3.5.2685 but different database, configuration, sensors etc..
I should like move all configurations, devices and sensors from one to other but I release the databa...
Tue, 10 Jun, 2025 at 1:44 PM
Hi, is it possible to have sensor that could tell me the amount of packet lost per network hop?
Thank you!
Article Comments
Hello,
I'm afraid such a sensor is not available in PRTG as a native sensor in the moment, it al...
Tue, 10 Jun, 2025 at 1:44 PM
I try to run following script:
https://helpdesk.paessler.com/en/support/solutions/articles/60478-how-can-i-monitor-licenses-in-my-network
but I cant, cuz the log tells me sth. I dont unterstand.
Die Datei "C:\Program Files (x86)\...
Tue, 10 Jun, 2025 at 1:44 PM
We have just started to use PRTG to monitor free disk space our virtual windows cluster environment. It has been working fine but last night we failed over to the other host in the cluster and since then all the drives (except for one) is s...
Tue, 10 Jun, 2025 at 1:44 PM
I am trying to monitor ports on a Cisco Small Business SG300 switch with SNMPv3. I receive an error
"SNMPERR_AUTHENTICATION_FAILURE (SNMP error # -35)" on some of the ports but not always. Like right now port gigabitethernet24 i...
Tue, 10 Jun, 2025 at 1:44 PM
I received email where "Check Now" was using internal IP instead of public URL.
how can I change placeholders for %homem to public URL
Article Comments
Hello,
please try adjusting the DNS Name-Field under "Setup...
Tue, 10 Jun, 2025 at 1:44 PM
I've created a template for all my web servers. This group is based off an OU and when auto discovery runs it will pick up new servers. The problem is the initial load of all the servers in the OU some servers only picked up ping and ...
Tue, 10 Jun, 2025 at 1:44 PM
We are working with PRTG ver 13.
When we try to monitor Domain Controller Servers as also DNS servers with Microsoft WMI, no matters if the OS version is 2003 or 2008, raise CPU utilization to 100%
All servers are under VMWare ESXI 5.1 upda...
Tue, 10 Jun, 2025 at 1:44 PM
Evaluating PRTG on our local network. I am trying to set up sensors for an HP Laserjet 1300n. I have already enabled read/write on the LJ.
When I attempt to add the built in SNMP HP Laserjet sensor, it always gets error of "No Res...
Tue, 10 Jun, 2025 at 1:44 PM
Hello,
I have a WMI ping to another computer.
In the log i have :
11/06/2014 16:43:54 Ping distant 1 OK
47 ms
11/06/2014 16:42:15 Ping distant 1 Avertissement
800706BA: Le serveur RPC n’est pas disponible
11/06/2014 16:31:54 Ping distan...
Tue, 10 Jun, 2025 at 1:44 PM
I guys ,
i'm trying to check SQLServer:Memory Manager Stolen Server Memory on a 2012 sql server.
Any idea ?
Article Comments
Hello,
thank you very much for KB-Post. Please check if you can get this metric with a SQL-Query...
Tue, 10 Jun, 2025 at 1:43 PM
Hello,
I monitoring different VMware ESX Servers and their virtual machines.
For every VM I get one sensor with various channels, like:
CPU usage
Disc read
Disc usage
Disc write and so on.
Is it possible to implement a ping as channel...
Tue, 10 Jun, 2025 at 1:43 PM
PRTG Network Monitor is an awesome product. Whenever I need a feature there it is, except perhaps this one, which has me stumped.
I have an asynchronous process that uses a queue to separate the raising of requests from the processing of ...
Tue, 10 Jun, 2025 at 1:43 PM
I have parent OU's that contain hosts and sub-ou's of that parent with different hosts. I've setup PRTG with Group Names being the parent OU and sub-groups being the sub-ou.
When I configure the settings of the sub-group I ...
Tue, 10 Jun, 2025 at 1:43 PM
Dear Support,
Is it possible to specify on which node the reports will be generated?
We are currently running a cluster with two members, and it would be beneficial to us to generate the reports on the secondary, failover node rather than...
Tue, 10 Jun, 2025 at 1:43 PM
Hello,
I try to monitor with Application Windows IIS sensor, when i create the sensor, i have no problem.
If i wait 1 hour i have this message :
WMI
: Impossible d'établir la connexion (code: PE015) -- PerfCounter: Impossible de se c...
Tue, 10 Jun, 2025 at 1:43 PM
Dear PRTG Support,
Would like to know if a notification e-mail could be sent when a maintenance window is created for a device in PRTG?
Please advise,
Kind Regards,
Malinda
Article Comments
Dear Malinda
Unless the user...
Tue, 10 Jun, 2025 at 1:43 PM
Dear Support,
When using a PRTG cluster, is it possible to adjust the 'timeout' value used to determine when to change the master node to a failover node?
How is the decision taken to classify the master node as 'down' and...
Tue, 10 Jun, 2025 at 1:43 PM
Hi,
I am an intern in a firm , and we're thinking about buying PRTG. We've ran some test with the trial version and are really happy about it.
But I have a question. If, after buying PRTG, we decide to change and we choose an ot...
Tue, 10 Jun, 2025 at 1:43 PM
I am getting the following error when I try to add a SQL Server 2005 WMI sensor:
"Microsoft(R) Windows(R) Server 2003, Standard Edition" does not support UserConnections (Field), LoginsPersec (Field), LogoutsPersec (Field)
But ...
Tue, 10 Jun, 2025 at 1:43 PM
Hi Guns,
I want to separate the a large number of alarms to two part so that can be Monitoring the alarm sensors by two screen. How can I come to realize?
I will appreciate for your kindly and precious suggest.
Article Comments...
Tue, 10 Jun, 2025 at 1:43 PM
Hi, I just wanted to find out how many sensor would we need if we were to monitor our SAN storage levels, would it be one for each storage disk/volume?
Regards
Kwok
Article Comments
Generally that is how it would work. The...
Tue, 10 Jun, 2025 at 1:43 PM
I am trying to monitor the number of files in a directory, I am able to use the following command at the shell to get the results.
find /var/qmail/queue/mess/ -type f -print | wc -l
I would like to use PRTG to monitor this but when I pu...
Tue, 10 Jun, 2025 at 1:43 PM
Hi,
In my environment i have two different SNMP community strings and wondering if i can specify both of them in PRTG config so that i can monitor devices on both strings.
Can someone guide me how can i specify more than 1 community str...
Tue, 10 Jun, 2025 at 1:43 PM
Hello,
I am using a Netflow 5 custom sensor on a Cisco routers, but it seems that the bandwidth usage indication on the vertical scale is about 50 times off. Where it says it is using 700kbit/s, it should be about 35 Mbit/s. Is there any ...
Tue, 10 Jun, 2025 at 1:43 PM
I am evaluating PRTG right now and have an error that seems to be intermittent. Almost every Cisco router/switch will show the following error from time to time. The alert goes away for a while, but returns. I have verified that each dev...
Tue, 10 Jun, 2025 at 1:43 PM
I would like to modify the names of the channels that were created while doing an autodiscovery of a Cisco switch. The channels reside under the "System Health Other" sensor, and are currently showing as unmodifable (greyed out, ...
Tue, 10 Jun, 2025 at 1:43 PM
Hi,
I am new to PRTG and would like to use in my organisation to monitor our 100mbps MPLS Links.
We have 4 Site which are connected to our private 100mbps MPLS cloud.
what i want to measure is the links on each site which connects to...
Tue, 10 Jun, 2025 at 1:43 PM
I have 3 probes.
For my user account - I would like to see alarms popup and sound notifications only for 2 of the probes. (currently i see and hear for the 3 of them).
I still would like to see the alarms if i'll enter that certain pr...
Tue, 10 Jun, 2025 at 1:43 PM
We have edited a custom sensor as below.
we would like the PAUSED hidden (works for the status) but the icon color is still blue.....
<!--Status Icons: Name and Status (on White) (custom-nopaused)-->
<div class="map_objec...
Tue, 10 Jun, 2025 at 1:43 PM
When using Performance Monitor sensors to graph details of RDP sessions the sensors will go into alarm when the RDP session is disconnected.
As an example the counter '\Terminal Services Session(RDP-Tcp 6)\Total Compressed Bytes'...
Tue, 10 Jun, 2025 at 1:43 PM
I would like to make a sensor to control the number of queued email for qmail, but I can not.
Anyone can guide me?
Article Comments
Hello,
thank you very much for your KB-Post. I'm very much afraid there is no native qm...
Tue, 10 Jun, 2025 at 1:43 PM
Hello,
How can i monitor number of days for Windows volume activation expiration?
("Time remaining (days)" in slmgr /dli output)
Article Comments
slmgr actually is a VBScript file (C:\Windows\System32\slmgr.vbs).
May...
Tue, 10 Jun, 2025 at 1:43 PM
Hallo,
gibt es im PRTG eine Möglichkeit , wenn sich z.B: auf der Datenpartition innerhalb von 10 Minuten der freie Speicher um 20GB ändert, dass er eine Mail versendet?
Bis jetzt habe ich nur wenn der freie Speicher unter 20GB ist bekommt...
Tue, 10 Jun, 2025 at 1:43 PM
Ref. PRTG Network Monitor 14.2.10.2113
I´m trying to setup an HTTP Advanced Sensor. I`m trying to check if authentication (HTML or NTLM) it´s OK.
But no matter if I enter an invalid password into Authentication fields, allways sensor it...
Tue, 10 Jun, 2025 at 1:43 PM
Hi!
I have a server that I auto-discovered and this WMI test popped up:
Physical Disk: Percent Disk Time
I like that test. I tried to clone it to another server which also has a bunch of working WMI sensors but I get the following er...
Tue, 10 Jun, 2025 at 1:43 PM
PRTG Server Administration Tool:PRTG Core Server Service could not be started,and could not start webserver for http://127.0.0.1:Socket Error #10106
Article Comments
Did you mean Error#10006? Then this may help:
https://helpdesk...
Tue, 10 Jun, 2025 at 1:43 PM
Is there a plan to allow the PRTG app to look at the certificates installed in the local computer account store and forward a cert? I would be very keen to use client certs on my reverse proxy/ARR which fronts for the PRTG core server
Or ...
Tue, 10 Jun, 2025 at 1:43 PM
I am aware of, if If the node wants to join a cluster and the cluster access key is correct then it connects to the master, and then the master will update the failover with the current PRTG version. But not sure, why it is not happening fo...
Tue, 10 Jun, 2025 at 1:43 PM
Hi
I am not really interested in CPU spikes, however I do want to be alerted to consistently high CPU useage over a period of time.
Is there a way to set this?
Article Comments
If you set a limit for warnings and alarms (say...
Tue, 10 Jun, 2025 at 1:43 PM
We are getting "Error connecting with SSL. Error connecting with SSL. error:140773F2:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert unexpected message" error while configuring HTTPS sensor in PRTG.
Can anyone look into this
G...
Tue, 10 Jun, 2025 at 1:43 PM
Hi there,
I have configured the Auto-acknowledge feature for down sensors. But it doesn't work. The log keeps giving me: HTTP/1.1 401 Unauthorized
The string is correct if i manually replace sensorid% by the ID of the sensor and ru...
Tue, 10 Jun, 2025 at 1:43 PM
Ref. Version 14.x
We upgrade from version 12 to version 14.x
After that, maps titles that where showed well on top of map screen, dissapear.
Also trying to pick a sub-map from bottom part of the dinamyc image icon was impossible.
Do I n...
Tue, 10 Jun, 2025 at 1:43 PM
We applied the latest Microsoft patches for our Windows Server 2003 system and rebooted, and when the system came up, this error message is front and center. We cannot connect to the Web GUI either. We are currently running ver 9.1.6.1963.
...
Tue, 10 Jun, 2025 at 1:43 PM
I am not sure what happened as of late, but it seems that my snmp traffic sensor is losing connection. I am connecting this sensor to an off site router's WAN interface using it's public ip address. It seems to connect and then lo...
Tue, 10 Jun, 2025 at 1:43 PM
We are using SNMP Uptime sensors for all our MPLS sites as the method of determining whether they are up or not. I have notifications configured so that they only fire when a sensor is "down" for 300 seconds. Is it possible to c...
Tue, 10 Jun, 2025 at 1:43 PM
Im wanting to do a monthly report based on Netflow v9 data, is this possible?
Article Comments
Hello,
I'm sorry, Toplists cannot be reported or exported. But if you have Netflow Sensors filtering for certain IPs/Hosts, the...
Tue, 10 Jun, 2025 at 1:42 PM
I have a powershell script that runs a command that extracts the available whitespace from each mail store on an exchange server. The command runs, but the format of the text looks too complex for the simple custom sensor so I changed it t...
Tue, 10 Jun, 2025 at 1:42 PM
Hi
I have a remote probe installed on a customer site, which monitors itself and 2 other servers.
Every now and then I get the same problem, which errors on every sensor: WMI Connection could not be established, RPC Server unavailable, ...
Tue, 10 Jun, 2025 at 1:42 PM
Hello dear Paessler Team
We are currently building some automation routines to produce custom report, while using the PRTG API.
We are able to extract probes, groups, devices, sensors, & are able to query the API to generate the graph...
Tue, 10 Jun, 2025 at 1:42 PM
I've just added some sensors for my Dell Equalogic storage arrays using the MiB importer. Looks good and the process wasn't too involved.
I can't seem to change what constitutes a warning or error though.
For example, I add ...
Tue, 10 Jun, 2025 at 1:42 PM
Hi
These 2 sensors encapsulate several other sensors - Does each count as just 1 sensor or multiple?
If multiple, is it possible to remove the ones we dont want (i.e raw buffer, handles, etc)
Article Comments
Hello,
it is ...
Tue, 10 Jun, 2025 at 1:42 PM
1. Can I categorize the issues in PRTG ticketing system? While closing the ticket we should be able to categorize the ticket based on the solution we provided and we should be able to generate the report every month to understand the % of ...
Tue, 10 Jun, 2025 at 1:42 PM
How to log-out an account in PRTG Enterprise Console? I have read your manual but i couldn't find it. What is user specific in EC?
Article Comments
Hi,
a user cannot really be logged out in the EC. You might switch to anot...
Tue, 10 Jun, 2025 at 1:42 PM
Guys,
I am trying PRTG out and so for, so good. I cant complain; however, I dont know how to monitor if the listener of my oracle database is up. I believe i can sucessfully monitor my database by monitoring the load of my unix box, by t...
Tue, 10 Jun, 2025 at 1:42 PM
Hello,
I'm trying to set up SMS notifications via BulkSMS. According to their API specification I should be able to specify a https URL but I receive the following error in the PRTG logs...
Error sending "SMS": Number=*, M...
Tue, 10 Jun, 2025 at 1:42 PM
Hi,
I have a problem with a custom sensor.
2 or 3 times a day, all the sensor goes to error with "Zeitüberschreitung, keine Rückmeldung der Anwendung (Code: PE018)"
What can be the problem.
The Sensor can't run over 60 seconds...
Tue, 10 Jun, 2025 at 1:42 PM
I have a website that runs internally on a windows IIS server. Sometimes the site stops responding. I have an HTTP full page load sensor and I have a wmi w3svc service sensor. Is there a way to have a failure on the HTTP sensor trigger a ...
Tue, 10 Jun, 2025 at 1:42 PM
Hello Paessler,
I just added the notification for some Access Points, however, it confused me a bit.
When I close a ticket, does it re-appear?
I changed the notification from "Error sensor state for x seconds" for "if thi...
Tue, 10 Jun, 2025 at 1:42 PM
Platform:
PRTG Network Monitor 14
Active Directory Server based on Microsoft Windows 2003 o 2008 r2, en 32 o 64 bits
All servers are based on virtual platform VMWare ESXI 5.1 update 2.
Polling interval: 60 seconds
We query servers using ...
Tue, 10 Jun, 2025 at 1:42 PM
How can limiting specific user to not viewing the credential information of root settings tab in web
Recently installing free version for our VPN connection for our branches, what I need is grant access for our ISP to see our traffics plus failover and packet loss, already created new read only User and Group without administrative access,...
Tue, 10 Jun, 2025 at 1:42 PM
Hello,
we monitoring different Cisco routers and switches.
After an automatic search I get the sensors CPU Load and System Health Processor for each devices.
CPU Load has the channels: down time and CPU Load
System Health Processor has ...
Tue, 10 Jun, 2025 at 1:42 PM
PRTG Core Server Service could not be started: The service did not respond to the start or control r
hi,
the Service status of PRTG is Stopped and I can't start it. When I click on Start Core Server the fallowing msg is appear: "PRTG Core Server Service could not be started: The service did not respond to the start or control re...
Tue, 10 Jun, 2025 at 1:42 PM
Hi
I need some help troubleshooting this one...
We have several HP Servers deployed with no problems and this one is set up no differently as far as I can see, but all SNMP HP sensors (ProLiant Health etc) come up with the SNMPERR_BAD_S...
Tue, 10 Jun, 2025 at 1:42 PM
How easily we can integrate PRTG with Osticket?
As PRTG ticketing system is not scalable, is there any other ticketing system which can be integrated with PRTG..
thanks
Article Comments
Dear user
PRTG does not offer a tick...
Tue, 10 Jun, 2025 at 1:42 PM
Do you have any guidelines for decommissioning a cluster consisting of a master and fail-over node to a single master node? That is, what is the process to remove the secondary node to only have the master node remaining and not be in a clu...
Tue, 10 Jun, 2025 at 1:42 PM
Hi
I have a sensor monitoring Output Load on a UPS.
The trigger so far says "If load is above 70% for more than 60 seconds, send email to Admin"
I also want it to change the state of the sensor to warning or error depending ...
Tue, 10 Jun, 2025 at 1:42 PM
Hello!
I have just installed PRTG Monitor, it's still in tests, and I have this error on Enterprise Console!
I can acces the server via web browser with it's IP without problems.
What does the error mean? How does it affect it'...
Tue, 10 Jun, 2025 at 1:42 PM
Good morning
after update to the version 14.2.10.2114, my powershell script returns the error PE132. Before of update, the powershell worked correctly.
This is my code:
write-host 2, "Error" $message
Some idea?
Thanks
...
Tue, 10 Jun, 2025 at 1:42 PM
We would like to change the amount of time a device is in the warning state before it goes to an error. Are we able to change this for a group of devices or in the configuration of PRTG?
Article Comments
Hello,
I'm sorry,...
Tue, 10 Jun, 2025 at 1:42 PM
Currntly i am evaluating PRTG. i am facing issue with "SNMP Cisco VPN Sensor"
we have two Cisco ASA device (5510 and 5512) and both ASA's are have 5 active IPSec tunnels each.
PRTG is showing -
IPSec tunnels as UP for ...
Tue, 10 Jun, 2025 at 1:42 PM
I have imported a MIB and I am using the SNMP Library Sensor to get a value on a specific OID.
I would like to alarm if the value is 2 only.
Value 1 and 5 are OK. I tried limits but I have not been successful. The alarm works with Upp...
Tue, 10 Jun, 2025 at 1:42 PM
