kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
We are using PRTG version 16.4.27.6846+
I have created a custom bash script to count files in a virus quarantine folder and an SSH Script Sensor to run the script and check results.
However, the sensor fails with PE132 "Response no...
Tue, 10 Jun, 2025 at 9:49 PM
SQL v2 sensor only suports Oracle 10.2 or higher.
There is a way to monitor Oracle 8?
Article Comments
Dear Luis,
Thank you for your knowledge base post.
With the new versions/improvements we only support version 10g and upw...
Tue, 10 Jun, 2025 at 9:49 PM
Hello and a happy new year,
we have a device tree in the PRTG which is designed in such a way that devices were created in subfolders for which two SNMP sensors were set up.
One sensor is labeled "Data", the other one is label...
Tue, 10 Jun, 2025 at 9:49 PM
Hello, I'm trying to use PRTG Network Monitor on a Azure VPSs System (some VPS linked through Logmein Hamachi VPN)
I installed the PRTG on one VPS and I want to test performance from another VPS.
I could do it, I could get informat...
Tue, 10 Jun, 2025 at 9:49 PM
I've spent the last 20 min trying to add a simple PING sensor to a certain IP address, but theres NO option only pings itself which is NOT useful for Internet Downtime. I need it to ping a specific IP/Domain. How do I do this? Theres N...
Tue, 10 Jun, 2025 at 9:48 PM
I want to get an alert when a new device is auto-discovered. The KB article is from 2010 and doesnt apply to my 16.4.27.6720 version.
How can I get an alert (email) when a new device is discovered and added?
Article Comments
Dea...
Tue, 10 Jun, 2025 at 9:48 PM
Hello Paessler,
I need to make a map based on a ring topology, and every node will have around 4 links (redundant fibers). Is there any way I can draw more than one line between the devices?
So far I can just drag the link from one device t...
Tue, 10 Jun, 2025 at 9:48 PM
Maybe this is a long shoot, but I thought I would ask anyway.
I have a Unifi AP and from what I can understand it should be possible to obtain some data from it. I have read through some forum threads and also contacted Unifi support rega...
Tue, 10 Jun, 2025 at 9:48 PM
Hello,
I would like to add services on one VMware server that is running in customer network.
On this server there are running Percipia servicies - Paralax, for hotel phone system.
Is it possible to monitor or somehow track status of th...
Tue, 10 Jun, 2025 at 9:48 PM
I have a little confusing problem with PRTG:
Initial situation: a group in PRTG for a remoteoffice with a probe for this network. Some Sensors in this group are in an alarmstate, i pause the whole group because of some maintenance (e. g....
Tue, 10 Jun, 2025 at 9:48 PM
PRTG display only one channel "response time" for any sensor I am trying to create for a specific de
I added a SNMP library to monitor the input, output and other parameters for a device. The problem is when I added the sensors, PRTG displays only one channel which is "response time" regardless of the sensor I create (I tried thr...
Tue, 10 Jun, 2025 at 9:48 PM
Hi there,
Is there a way to generate a cover page in the report output? I've tried modifying the reportheader.htm and using the Introduction setting the report settings but they simply add some extra content onto the first page. I'...
Tue, 10 Jun, 2025 at 9:48 PM
I have a PC setup with the Network Monitoring tool. I have it configured to pull the data from one of my routers, but I am not receiving any data. Firewall and Antivirus have been disabled.
Here is the configuration from my router:
ip f...
Tue, 10 Jun, 2025 at 9:48 PM
Dear PRTG
I Would like if I can generate a report with the newest sensor, like 'added/deleted' in last week/day etc.
regards
Article Comments
Hi there,
If I understood you correctly you can get a list of sensors s...
Tue, 10 Jun, 2025 at 9:48 PM
I am trying to add an SNMP Library sensor to an Eaton UPS. I have downloaded the MIB file from Eaton, imported it with the Paessler MIB Importer, and the oidlib file shows up in the snmplibs folder on the server.
When I select SNMP Librar...
Tue, 10 Jun, 2025 at 9:48 PM
I would like to plan a large installation of PRTG. Can you assist me?
Article Comments
This article applies to PRTG Network Monitor 16 or later
Site Planning for PRTG Network Monitor
When planning your PRTG installation, con...
Tue, 10 Jun, 2025 at 9:48 PM
I am trying to figure out how to stop certain disk sensors from showing as down - i need them to show as warning - where do I change this? All KB articles seem to relate to channels, but I have tried setting the limits in there and it does...
Tue, 10 Jun, 2025 at 9:48 PM
Hello,
We want to send IPFIX flows from several devices. Door do we need to run each flow to a different port or do we run all the sensors on one port with the source IP setting being enough to send the data to applicable sensor? Thanks. ...
Tue, 10 Jun, 2025 at 9:48 PM
hi, i did download 30 trial to try . I configured smtp yesterday and got it communicated. Today i run auto discover and it came with bunch of spam looks a like devices. Any help of why would be appreciate or how to prevent of happening. Th...
Tue, 10 Jun, 2025 at 9:48 PM
I am trying to monitor the throughput our Web Server has (which contains 3 web applications). I would like to be able to break down how much bandwidth is used by the different ports that are used for our http and https web applications.
I...
Tue, 10 Jun, 2025 at 9:48 PM
Hi,
We are starting to use XML Custom EXE/Script Sensor but what ever I try, i get the error;
Access denied. Please check your Windows credentials. (code: PE095)
I've tried my Windows-setting with computername, or without or wit a...
Tue, 10 Jun, 2025 at 9:48 PM
Hi,
We´ve migrated succesfully to the SQLv2 sensors, but one day after the migration all the sensors stopped working with the error:
Could not load file or assembly 'Paessler.Xml, Version=1.0.0.0, Culture=neutral, PublicKeyToken=nul...
Tue, 10 Jun, 2025 at 9:48 PM
Is it possible to enter a query in WMI Tester advanced tab to pull more than one piece of data?
For example
SELECT SerialNumber FROM Win32_SystemEnclosure
SELECT Model FROM Win32_SystemEnclosure
I've tried multiple ways, but alwa...
Tue, 10 Jun, 2025 at 9:48 PM
We have a number of sensors on a schedule to not trigger overnight. At 9 am when they start up again, they all fire up within a short time of each other.
Many of these sensors involve querying a database, so we get a spike in database re...
Tue, 10 Jun, 2025 at 9:48 PM
Hi,
I wrote a ps1-Script that executes remote on hosts to monitor connectivity of routes:
param (
[string]$computerName = "127.0.0.1",
[string]$target = "127.0.0.1"
)
Try{
$res = Test-Connection -Source $computer...
Tue, 10 Jun, 2025 at 9:48 PM
Hallo, wie fange ich an, dass System einzurichten. Was ist sinnvoll?
B. Zetzsche
Article Comments
Sehr geehrter Zetzsche
Der allererste Einstieg in PRTG ist etwas überwältigend. Wir haben uns aber bemüht, den Funktionsumfang i...
Tue, 10 Jun, 2025 at 9:48 PM
Dear all,
We recently added 12 Cisco ASA 5506-X Firewalls in our PRTG network monitoring.
When we execute an auto discovery we see several sensors, but we are experiencing problems with the bandwidth sensor.
The bandwidth sensor for th...
Tue, 10 Jun, 2025 at 9:48 PM
i have installed PRTG demo version in my VM merchine last friday. after testing i shutdown the program and kill the process in the windows Task Manager. today, when i came back to my office, my security app detect PRTG still working and kee...
Tue, 10 Jun, 2025 at 9:48 PM
I am not sure, if there is similar question answered here, but I cannot find it. Is it possible to find out all columns in the table? For example:
<!--Data Tables: Channels of a Sensor-->
<div class="map_object map_table&qu...
Tue, 10 Jun, 2025 at 9:48 PM
Is it possible to get a good read-out of a Dell EqualLogic SAN ? I see in PRTG9 dell hardware monitoring is included.
But when i add a Dell EqualLogic SAN to PRTG i get very little information, ofcourse i can load in a MIB file. But this...
Tue, 10 Jun, 2025 at 9:47 PM
i want to add multiple sensor which already created to the same graph but with different colors
Article Comments
Dear gamaleldepaty,
Thank you very much for your knowledge base post.
May I ask you kindly to further clarify...
Tue, 10 Jun, 2025 at 9:47 PM
When I test my API with https protocol I receive an error. The url is correct and I can see the result of a simulation using the "URL recorder" tools.
6/01/2017 10:14:27: 1 URLs
16/01/2017 10:14:27: URL#1: GET https://www.****...
Tue, 10 Jun, 2025 at 9:47 PM
I have updated PRTG to version 17.1.28.1032. Ever since doing this update, the sensors on PRTG are sending me e-mail notifications with different errors. This seems to happen randomly but it usually has seemed to occur in the early morning ...
Tue, 10 Jun, 2025 at 9:47 PM
NetApp cDOT System Health SOAP sensor is not seeing both the nodes in the cluster.
It is only listing the cluster's UUID identity as a node instead of the 2 individual nodes.
Our NetApp cluster is running cDot version Ontap 9.0. Is 9...
Tue, 10 Jun, 2025 at 9:47 PM
Hi friends.
I'm trying to create a Custom Sensor Python but, everytime that I edit the default script structure, I got a ERROR:
XML: Structural error in xml file, 1 open items. -- JSON: O JSON retornado não corresponde à estrutura e...
Tue, 10 Jun, 2025 at 9:47 PM
Sometimes it's neccessary to monitor connectivity from a certain remote host instead of the probe, e.g. to monitor VPN routes the probe isn't part of. The default PING probe doesn't provide that feature.
Article Comments...
Tue, 10 Jun, 2025 at 9:47 PM
How exactly the threshold notification works ?
If i set a threshold notification for packet loss whenever goes beyond 10% for at least 600secs (10 min) when the notification trigger ?
It is if during those 10 min packet loss get to 10% on...
Tue, 10 Jun, 2025 at 9:47 PM
I would like to update my PRTG python with additional modules(wmi, pywin32) that required for my Python Script Advanced Sensor. I tried to update python with pywin32 but i am getting the below error,
File setup.py, line 16, in <modul...
Tue, 10 Jun, 2025 at 9:47 PM
We have successfully written an Pyhton Script that querys the Overall System HEalth of ESXi Hosts (that is not yet avaiable in PRTG told by support)
We are getting an String Value back from this Script.
Is there any way to implement thi...
Tue, 10 Jun, 2025 at 9:47 PM
Hi Paessler,
I'm working on monthly report that is required to know how many users are in a specific user group in prtg.
Just wondering if there's a way to automate this via API without logging on and manually check on prtg - syst...
Tue, 10 Jun, 2025 at 9:47 PM
We monitor two Windows services on two different Windows servers. At a seemingly random interval - but possibly when the Core is rebooted - the service changes from being monitored without issues to showing "Service not found (code: P...
Tue, 10 Jun, 2025 at 9:47 PM
Hi Team,
Hopefully this is a simple question that I'm missing an obvious answer to.
I'm adding a couple of new remote probes into my core installation.
The problem I've faced is the access keys from the primary server doesn...
Tue, 10 Jun, 2025 at 9:47 PM
Hi,
Recently we lost the access to the web pages administrations. The Enterprise Console can't access to the data. It seem to be the prtg-core service that freeze. I have received a mail from the prtg server, this is the message :
T...
Tue, 10 Jun, 2025 at 9:47 PM
Hello everybody,
We use PRTG to monitor different network devices via SNMP. 2-3 sensors were set up for each device.
In the PRTG Map view, we have created a custom object, which only shows devices and since when they are no longer acces...
Tue, 10 Jun, 2025 at 9:47 PM
I have created a new custom lookup and it is placed in the custom folder. After I do the "Load Lookups" the new custom lookup does not show in the Channel Settings list. I see all of the default lookups but not my new custom one. ...
Tue, 10 Jun, 2025 at 9:47 PM
Hi,
we monitor an FTP server with the FTP Sensor and added credentials to check a successful login.
However if I change the password of the user the sensor status in Status "OK" with message "530- Login incorrect"....
Tue, 10 Jun, 2025 at 9:47 PM
Hello,
Can you tell me if this url syntax should result in the "Sunburst" view of a group?
https://ourprtgserver.a-dec.com/group.htm?id=8348&tabid=1&groupviewsize=sunburst
When I click in I get the second from the le...
Tue, 10 Jun, 2025 at 9:47 PM
I'm trying to change the OID's of a SNMPCustomSensor by using the API setobjectproperty method. PRTG returns OK, but the value hasn't changed.
Probably I'm not using not the correct subid=channelid &name=property_name....
Tue, 10 Jun, 2025 at 9:47 PM
Hi,
I want to create a report to find out the values from a specific channel on all servers in our enviroment.
The Sensor is a EXE/Script Advanced sensor and have few channels.
I want to report back only 2 of them.
How can we achieve...
Tue, 10 Jun, 2025 at 9:47 PM
I am able to duplicate an existing HTTP Push Data sensor, change the name, and assign it to a new device. However, I am not able to change the Identification Token via the setobjectproperty in the API.
Is this possible? If so, what is the...
Tue, 10 Jun, 2025 at 9:47 PM
Hi,
How to monitor if custom Windows process (i.e. customprocess.exe) runs for more than 15 minutes and then get alert when it does.
The normal situation is when the process is NOT running for long time. It runs for a short period of time b...
Tue, 10 Jun, 2025 at 9:47 PM
Hi,
How can I gnenerate a list of new sensor with powershell from remote?
My URL: https://myprtgserver
Or better downlod the page:
https://myprtgserver/sensors.htm?columns=cumsince,device,name,status&sortby=cumsince&count=300 ...
Tue, 10 Jun, 2025 at 9:47 PM
i want to add a sensor for a new user being assigned to a port identified by the dhcp address 192.168.53.0.
so that i can have a graph of bandwidth usage of internet by that user.
Article Comments
Hello there,
The only way I c...
Tue, 10 Jun, 2025 at 9:47 PM
I’m wondering if it is possible in PRTG network monitor, to get notifications based on "unexpected behavior"?
Not a trigger on a absolute number (volume or threshold), but depending on data from the past. When a sensor is steady i...
Tue, 10 Jun, 2025 at 9:47 PM
Im trying to run a SQL script from within a powershell script sensor.
But i need to feed the SQL credentials from PRTG into the EXEML Powershell script.... is this possible?
Basically,.. is there any way to access the PRTG credential sto...
Tue, 10 Jun, 2025 at 9:46 PM
I'm attempting to improt my first MIB into PAESSLER and have been unsuccessful.
The import MIB file function errors out on Line 1 (Module Identifier expected)
I'm not sure how to proceed.
Something went wrong. Please chec...
Tue, 10 Jun, 2025 at 9:46 PM
I have a hyper-v vm running as a PRTG core server. I need to convert it to a VMware vm using VMware converter. I have tried this several times with no success. I have tried stopping all of what I thought would be the necessary services. But...
Tue, 10 Jun, 2025 at 9:46 PM
Do you know what does mean that?
SNMPERR_UNSUPPORTED_SEC_LEVEL (error SNMP # -34)
The case was, during last week every sensor worked properly but yesterday every sensor show me the error
SNMPERR_UNSUPPORTED_SEC_LEVEL (error SNMP # -3...
Tue, 10 Jun, 2025 at 9:46 PM
I recently moved our PRTG server from a local setup to a cloud setup. Because it now operates outside of our internal network, security best practices are now more of a concern. Specifically, I am trying to change the user account that is u...
Tue, 10 Jun, 2025 at 9:46 PM
PRTG Version 17.1.28.1032
I received some bad data from a radio sensor.
Normally it receives a signal around -43dBm.
However, on a particular day PRTG recorded a signal level of +531dBm.
This obviously renders all historical graphs useles...
Tue, 10 Jun, 2025 at 9:46 PM
After installing the freetrial version all I get is "The server was stopped System Emergency. The system was halted, because of the following: No configuration file found, but monitoring data for an unknown configuration exists! Pleas...
Tue, 10 Jun, 2025 at 9:46 PM
I'm trying to configure Auto-Discovery to use AD integration (filtered by OU) but receive the following error:
Error (Bad Request)
The validation of at least one of the new objects failed because of the following:
Active Directory can...
Tue, 10 Jun, 2025 at 9:46 PM
We have one core and 4 remote probes with a few thousand sensors each. I need to copy the groups/devices/sensors from each remote probe to remote probes in an alternate locate for fault tolerance/high availability.
I tried to clone a group ...
Tue, 10 Jun, 2025 at 9:46 PM
Monitoring two Ubuntu 16.10 VMs with PRTG. PRTG is generating huge session count. I dont see this behavior in my other debian 8 vms.
/var/log/syslog:
proxy systemd[1]: Started Session 3900 of user username
after 60 seconds
proxy systemd...
Tue, 10 Jun, 2025 at 9:46 PM
Hi All,
I am having issues with the Sensor Output:
Reponse not wellformed: "(99.052:Current SLA is 99.052% <prtg> <result> <channel>SLA</channel> <value>99.052</value> <Unit>Custom</Unit&...
Tue, 10 Jun, 2025 at 9:46 PM
In the old PRTG Version 6 we have often worked with several different sensors from several devices together in only one graph. You cold see and compare them at the first view. Since Version 7 we don't find this funktion anymore. Current...
Tue, 10 Jun, 2025 at 9:46 PM
Hi all,
Currently we are looking for a alternative tool for 'Netgear Cloud Management'. We have around 150 pieces Netgear WNDAP360 accesspoints around The Netherlands. We would like to see ping (easy to set-up with PRTG) but also ...
Tue, 10 Jun, 2025 at 9:46 PM
Hi, trying to get the "SNMP HP ProLiant System Health" sensor to work but all I get is "No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003)"....
Tue, 10 Jun, 2025 at 9:46 PM
Bonjour, je viens d'installer PRTG votre site m"a demander de passer en SSL
ensuite il me demande un nom d'utilisateur et un mot de passe.
Comment les connaitres car je n'ai juste saisi, sur votre site, que le nom de l'...
Tue, 10 Jun, 2025 at 9:46 PM
Hello
We have a Windows 2012 R2 Failover Cluster with 2 Nodes.
Have you specific probes for Windows 2012 R2 Failover Cluster, which also monitor the disks from Cluster.
or
have you a good method as monitor Failover Cluster disks with a...
Tue, 10 Jun, 2025 at 9:46 PM
Hello together,
we are currently looking for a monitoring system for our environment and PRTG is our favorite.
However, we have a requirement that I could not solve yet. We are currently backing up our servers with Windows Server Backup. ...
Tue, 10 Jun, 2025 at 9:46 PM
We have Windows MSMQ setup on a failover cluster.
I am struggling to find a way to add a sensor to monitor these queues, as they are not visible on the standard MSMQ sensors.
Any suggestions?
Thanks guys.
Article Comments
It&#...
Tue, 10 Jun, 2025 at 9:46 PM
Can I install this on a Standalone Multi User Network that is secured and blocked from the outside?
Article Comments
Sure thing, activation has to be done manually in case you want to use a commercial license offline :)
Jan,...
Tue, 10 Jun, 2025 at 9:46 PM
I have a local PoSh script scheduled task that queries a particular computer setting and either writes a "1" or a "0" to a custom registry key. I then have a PoSh script tied to a custom EXE/XML sensor that queries the r...
Tue, 10 Jun, 2025 at 9:46 PM
Hi Everyone,
I am looking to setup SMS notifications so that the managers' of our Monitoring teams can get SMS notifications when they are out of office. It is more convenient to them to have the SMS option instead of emails when they...
Tue, 10 Jun, 2025 at 9:46 PM
Hello,
Is it possible to view specific sensor file fir inspiration? Basicly I would need to access snmp hp proliant system health to be able to create custom sensor with just channels I need. Is that possible or are default srnsors enco...
Tue, 10 Jun, 2025 at 9:46 PM
My Business want's to have SLA report on individual business applications.
So I need to present a figure saying that "Dynamics AX" was up 98% of agreed time last month.
In order to do so I need to collect aggregated informatio...
Tue, 10 Jun, 2025 at 9:46 PM
Hi,
I don't find what che channel 'power' of the soap sensor for a virtual machine, means.
https://www.paessler.com/manuals/prtg/vmware_virtual_machine_soap_sensor
Maybe the virtual machine status like freezing or halted? ...
Tue, 10 Jun, 2025 at 9:46 PM
Hi,
I am running this PRTG on windows server which has 80 GB for C drive and 280 GB for E drive.
PRTG running version: 16.4.28.7421
I am running out of disk space on C, so I used to transfer the monitoring data files manually from C: to...
Tue, 10 Jun, 2025 at 9:46 PM
We have a PRTG Cluster in two different network segments since 3 years now and it works pretty good.
Sometimes the failover cluster node sets a sensor to warning/failure status (maybe because of latency) with Code: PE015 (could not connect)...
Tue, 10 Jun, 2025 at 9:46 PM
Hello,
it is possible to make a list of all sensors, which has set up notification via SMS service? We have over 3.000 sensors, and it is impossible to check every sensor. :-(
Thank you very much.
Article Comments
Dear MiSti, ...
Tue, 10 Jun, 2025 at 9:45 PM
Every time I start the Billing Tool I get an error message: ''.hexadecimal value 0x04, is an invalid character. Line 1984121, position 16.
This worked one time and has not worked since. I installed n another machine and got the s...
Tue, 10 Jun, 2025 at 9:45 PM
Hi All,
Hopefully an easy question. We have the "VMware Datastore (SOAP)" sensor setup, which is getting all the correct metrics.
One of our datastores filled up, which the sensor is reporting as Free Space = 0%. No alert was...
Tue, 10 Jun, 2025 at 9:45 PM
I’m looking for a way to monitor the traffic behavior for any abnormal change, in a service provider
Dear All,
I’m looking for a way to monitor the traffic behavior for any abnormal change, in a service provider that has almost the same traffic graph every day,
I know that I can use limits in the sensors, but limits can detect only ou...
Tue, 10 Jun, 2025 at 9:45 PM
We have a service that outputs a set of monitoring data (channels) in json or xml format.
What is the most efficient way of getting these data into PRTG? Do I have to use one sensor per channel - or is it possible to use one sensor per gro...
Tue, 10 Jun, 2025 at 9:45 PM
Hi,
I have PRTG running to monitor multiples servers, and I want PRTG to send me and other people SMS text message notifications. I understand that it is necessary third software but I need to know what software (name) allows send SMS te...
Tue, 10 Jun, 2025 at 9:45 PM
Hi,
I'm trying to monitor the Raid Health of my Dell PowerVault MD38201i SAN. I know there's a few sensors for this SAN regarding physical disks, but none for the Raid Health.
Is there a sensor a don't know of?
Artic...
Tue, 10 Jun, 2025 at 9:45 PM
Hi there.
I would like to verify if the SSH service is working but I don't want only to check based on connecting to port 22 (or 23 for Telnet). I want to be able to verify if login is succeeding. Is there any way to achieve this goal?
...
Tue, 10 Jun, 2025 at 9:45 PM
I've got some servers which have large volumes mounted under mount paths (folders) rather than as drive letters.
The WMI Disk Free (Multi) Sensor doesn't pick those up, so a single disk sensor has to be added for them. Is it possibl...
Tue, 10 Jun, 2025 at 9:45 PM
With Netflow enabled and pointing to PRTG, the Netflow sensor in PRTG does not reflect the throughput seen on the normal SNMP probe of the same customer interface. There are no filters set in which would hamper the information. Running PRTG...
Tue, 10 Jun, 2025 at 9:45 PM
PRTG Randomly stopped sending email alerts to us. I have tried EVERYTHING to get it to work but it keeps coming back with the same error.
I can successfully telnet to my exchange server and send an email through so I know it is connecting...
Tue, 10 Jun, 2025 at 9:45 PM
Hello !
I'm relatively new to SNMP and currently trying to add somes snmp sensor from my fortigate device to prtg. I'd like to be able to monitor VPN state.
I followed this tutorial :
tec-networks.de: Monitor VPN State from ...
Tue, 10 Jun, 2025 at 9:45 PM
Hi
we bought a new storage, the model is Huawei oceanstor.
We tried to monitor it via snmp but without success.
Is there an integrated template like the one we are using for our old netapp storage?
Article Comments
Dear michel...
Tue, 10 Jun, 2025 at 9:45 PM
We use sensor names like "server_1 | uptime". Is it possible to configure device templates to get device names as part of sensor names?
Article Comments
Dear Steffen
Device Templates don't support place holders. ...
Tue, 10 Jun, 2025 at 9:45 PM
When trying to add a Hyper-V Virtual Machine sensor I am unable to. Under the Virtual Machine Settings I see "No Virtual Machine available". I have 4 VMs running on this host. Other Perf Counters/WMI sensors seem to be fine on thi...
Tue, 10 Jun, 2025 at 9:45 PM
Hi,
is there are trick to treat all return codes which are not listed in the value lookup as error for the ScheduledTask2XML sensor?
We use this sensor quite extensively and it happed that we missed errors/warnings because the Task Result...
Tue, 10 Jun, 2025 at 9:45 PM
Hello,
We have in our office a wall of Monitoring Screens displaying Maps for our Monitoring Staff and Management.
I currently have setup the Status and Audible Alarm (if Alarms > 0) Object, but it seems this object doesn't wait ...
Tue, 10 Jun, 2025 at 9:45 PM
I feel that having pop-ups occur whenever I leave my cursor over a sensor for more than a few seconds is annoying and obtrusive.
Can I change the delay before these popups will be shown?
Article Comments
You can change the de...
Tue, 10 Jun, 2025 at 9:45 PM
Hi,
During the trial edition installation on my server in company,
i need to enter my license name and key. After i entered it, it pop out "contacting passler license server" (initializing License)
Due to my company does not allo...
Tue, 10 Jun, 2025 at 9:45 PM
Last night, my server start to become unstable in collecting data. When I see in the Logs > System Events > Probe Related, there are so many message contains "Probe "Local probe" at 127.0.0.1:xxxxx has disconnected"...
Tue, 10 Jun, 2025 at 9:45 PM
