kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Just wondering what exactly the ping jitter value is?
Google searches tells me that anything over 150 is 'bad' for VOIP/Gaming. Is the value the same for all jitter measurement tools?
Article Comments
Hi,
Jitter is a...
Tue, 10 Jun, 2025 at 9:20 PM
I've seen this question already asked in 2010 but there is still no solution available. if this feature is added to prtg it will spare a lot of time to add a sensor to , in our case 300 devices.
Article Comments
Hey Ron,
T...
Tue, 10 Jun, 2025 at 9:20 PM
I have a task to top up some accounts of third-party services like hosting, IP telephony and so on. Some of this top ups are regularly, but some are not, and I have to monitor the amount of funds on the account manually.
As I can see, this...
Tue, 10 Jun, 2025 at 9:20 PM
Hi,
I've been attempting to execute an HTTP XML API using a GET query like so:
https://[url]/action?actionString=<?xml version="1.0" encoding="utf-16"?><SomeAction xmlns:xsi="http://www.w3.org/2001/...
Tue, 10 Jun, 2025 at 9:20 PM
Hi, I have a PRTG install onsite thats working fine, BUT I also want a lot of the devices that it monitors adding to another system we run at another site, is there a way that does not involve me creating all the devices twice I can use, an...
Tue, 10 Jun, 2025 at 9:20 PM
On the Cisco Nexus I configured 1 collector to PRTG server with it IP 192.1682.173 , agent ip : i left black 0.0.0.0, PRTG server shows "This sensor has not received data for X minutes Y second."
i cannot see sflow data, please...
Tue, 10 Jun, 2025 at 9:20 PM
I would like to remove just the X-Axis on Graphs, I there a way to do this?
Article Comments
Hi there,
I'm afraid that's not possible. The graphs are basically the same as in the objects they derive from and there'...
Tue, 10 Jun, 2025 at 9:20 PM
Current graphs are wasting too much space due to vertical time alignment.
How to rotate change it?
Article Comments
Dear Olson
To label as many points as possible, we decided to render the time marks vertically. This cannot be...
Tue, 10 Jun, 2025 at 9:20 PM
Hi,
is there a possibility to set a filter on the trafficlights map object?
I would like to have all sensors with the tag "#important" within one trafficlight object.
The exact same thing would be great for sunburst and tree...
Tue, 10 Jun, 2025 at 9:20 PM
My 2012 R2 machine doing checks against itself stopped working today at 7:12pm. Disk free and Microsoft Hyper-V Network Adapter stopped reporting - both showing PE015.
I did updates around 11am and rebooted, and all was fine then. Only 8 ...
Tue, 10 Jun, 2025 at 9:20 PM
Hello everyone,
I would like to know in which case the failover decide "master node is down", the slave node become active ?
when the server doesn't respond to the ping ? when process (prtg server) doesn't respond ? in...
Tue, 10 Jun, 2025 at 9:20 PM
Hi
We try to monitor the programm version of installed products on a system trough powershell/xml sensors. Below is the Output from the Script. In PRTG the value is always 0. How can we display this value in a channel? Is it even possible...
Tue, 10 Jun, 2025 at 9:20 PM
Hello,
Is it possible to output some or all channel values for the notification at the same time if only one channel is on error state? Or is there a placeholder to output the channel values in the message?
Article Comments
Hi...
Tue, 10 Jun, 2025 at 9:20 PM
I cant seem to find where the logs of added and deleted devices are stored.
Article Comments
Hello brunindf,
Whenever an object is created or deleted, PRTG writes a log file entry into the log of the parent object. So please c...
Tue, 10 Jun, 2025 at 9:20 PM
Hi,
We are looking to migrate an existing PRTG Server to a new Server, and I wanted to know if an acceptable migration path is to create a PRTG cluster and let PRTG sync/replicate everything between the two Servers, and then failover PRTG...
Tue, 10 Jun, 2025 at 9:20 PM
Whenever I upgrade PRTG to a new version it reboots the server when it is done. I would expect it to ask if you want to reboot now or later, not just reboot the server with no warning. Is that how it is supposed to work, or is there somethi...
Tue, 10 Jun, 2025 at 9:20 PM
Hi all,
Error shown when searching sensors using AskF5 library (oidlib).
The message is "The following page has become unresponsive. You can wait for it to become responsive or kill it."
I tried to press "Wait" button ...
Tue, 10 Jun, 2025 at 9:20 PM
I have a spike filter enabled on several sensors, in the instance where i use it on "Oldest File" i do not get an error when a file is older than the Spike Filter Max. Value.
I have the filter set max value 1 day, but when a fil...
Tue, 10 Jun, 2025 at 9:20 PM
All the sensors on a workstation were fine. Then I changed the IP address on that workstation. I updated the ip address on the device in PRTG but a few of the sensors are erroring out:
http://i.imgur.com/TbTwCFc.png
http://i.imgur.com/d...
Tue, 10 Jun, 2025 at 9:20 PM
Why does the device name disappear and get replaced with root everytime I go into settings on a devi
Why does the device name disappear and get replaced with root everytime I go into settings on a device.
Article Comments
Hello mehlrejd,
Thank you very much for your KB-post. Please clarify your request, e.g. by providing me w...
Tue, 10 Jun, 2025 at 9:20 PM
Hi,
I am having trouble in monitoring the Canon printers with PRTG SNMP Printr and Custom sensors.
I have already been through the previous resolutions provided by Paessler regarding the same issue, but didn't resolve mine.
I am get...
Tue, 10 Jun, 2025 at 9:19 PM
Hi all,
New user and attempting to use the trial version of PRTG Network Monitor on a Windows 7 box.
After accepting the terms and on the 'initializing license' section, I keep getting a popup for Themida:
an internal exception...
Tue, 10 Jun, 2025 at 9:19 PM
We have an endpoint connection on a context of a Cisco ASA 5515 for multiple clients and one day our PRTG showed many of the sensors being red. While it's possible the tunnels were down at some point they were definitely up when we did ...
Tue, 10 Jun, 2025 at 9:19 PM
Hi there,
I added the Docker sensor for a new machine, adjusted the port, added the certificate and private key (self signed, with own CA). I can see and add the docker container but when getting the data I always get:
Connection refuse...
Tue, 10 Jun, 2025 at 9:19 PM
I tried to create ticket via API but calling the format below,
http://<prtg-host>/api/addticket.htm?id=new&subject=<subject>&assigned=<group-or-user-id>&priority=<priority-1-to-5>&objectid=0&con...
Tue, 10 Jun, 2025 at 9:19 PM
Hi,
I don't have the password of the domain admin.
If I add an account user, I can't read group domain.
It's possible with an account user (who can read AD)?
Thanks
Best regards,
Article Comments
Hi Jean,
...
Tue, 10 Jun, 2025 at 9:19 PM
Hi.
As we are using PRTG to monitor some of our infrastructure and we use another tool for managing our alerts and data reports. We need to integrate this tool with PRTG in order to retrieve metric and Alert data. From another query that ...
Tue, 10 Jun, 2025 at 9:19 PM
I'm trying to keep track of ips visited when using "tracert" with Powershell. I've successfully created a sensor (EXE/Script) that will return the hop path as a message. Is there any way to return multiple messages so that...
Tue, 10 Jun, 2025 at 9:19 PM
I have some devices that are taken out of service, so these should no longer be displayed on Maps. As I would like to keep the data gathered at hand for at least some time, I don't want to delete the devices. Does PRTG have a setting th...
Tue, 10 Jun, 2025 at 9:19 PM
Hi,
I have two queries about the PRTG API:
When we retrieve data, we can see that it is returned with the corresponding timezone offset (depending on the PRTG machine location). How can we get what that offset is? My point is that we n...
Tue, 10 Jun, 2025 at 9:19 PM
I am trying to achieve backup failure reporting within the PRTG software by way of the WMI or API event log sensor.
I have recently created two sensors on a server to check for a specific event in the Application Event Log. Both the WMI a...
Tue, 10 Jun, 2025 at 9:19 PM
Hey guys,
At the moment, I have three remote probes linked into my system. These have all been setup by me remote desk topping into the computers at the site I wish to monitor, downloading a remote probe installer on my local machine, the...
Tue, 10 Jun, 2025 at 9:19 PM
Hello,
I have to monitor DB2 database. So I am using ADO sensor but I have the following message "The 'IBMDADB2' provider is not registered on the local machine."
My connection string is like : "Provider=IBMDADB2...
Tue, 10 Jun, 2025 at 9:19 PM
Hello all,
My PRTG licence with 500 sensors will expire within 5 days (Thats wat it says)
See here for more information:
Licensed Edition PRTG Network Monitor 500 (expires 25-7-2017)
Last Update 20-7-2017 14:40:22
Maintenance until ...
Tue, 10 Jun, 2025 at 9:19 PM
I'm Quan,
I used "Historic Data" tool to export my data. I want to show the line Percentile on the my Graphs (same pictute).
You can guide me to setup in PRTG.
https://1drv.ms/i/s!AoABa9eR8bPdpyjheUFHnDTufe70
Thank!
A...
Tue, 10 Jun, 2025 at 9:19 PM
Guys,
I’ve SAN which return performance data in as series of values.
Smth. like 100 IOPs values with corresponding timestamps.
If array is "too busy", it reports "Busy, try again later".
I.e. performance data might be un...
Tue, 10 Jun, 2025 at 9:19 PM
I have one specific room with 33 identical boxes give or take a few apps but identical outside of that. Only major difference is some are hardwired while others are not. Does their need to be something extra done for prtg to find these mach...
Tue, 10 Jun, 2025 at 9:19 PM
I am trying to capture syslog from Cisco Telepresence System. I have added the sensor and also updated the syslog server IP on the Cisco Telepresence System but I am not receiving any Syslog messages. i am running a trial version of PRTG ne...
Tue, 10 Jun, 2025 at 9:19 PM
Hey guys,
Pretty much as the title states, I am trying to remote desktop onto machines at other sites in order to setup remote probes on them, however, I can't seem to access the PRTG web interface in order to download the probes. I t...
Tue, 10 Jun, 2025 at 9:19 PM
Running v17.3.32.2339.
Original configuration was setup manually.
I'm now trying to set device PING sensors as the parent for the device's other sensors to prevent multiple 'down' alerts per device.
What are the ramifica...
Tue, 10 Jun, 2025 at 9:19 PM
Hello,
I've just done an initial setup and have imported all my Windows Servers into PRTG. Some are looking great, some are only showing Ping or Ping+RDP. I've noticed that the ones that look like everything is setup properly ha...
Tue, 10 Jun, 2025 at 9:19 PM
Hello
I'm trying to use /api/table.htm?output=csvtable to get data from the PRTG system for network monitoring (previously I tried xml and json but there was too much unnecessary data from the tag and property name, csvtable has the bes...
Tue, 10 Jun, 2025 at 9:19 PM
The power supply is working normally but we received this sensor error, how could I fix it, or why the error persist.
Article Comments
Hello,
Thank you for the KB Post!
To allow us a better overview of what is going on, plea...
Tue, 10 Jun, 2025 at 9:18 PM
we can not implement sensors for IPSEC tunnels on cisco routers , only firewalls are allowed .
we need to add sensors for IPSLA & traffic utilization . your feedback whether its doable or not.
Article Comments
Hello Ahmed, ...
Tue, 10 Jun, 2025 at 9:18 PM
Hi,
I setup a Netflow v9 sensor. Data is coming in, as per the Live Data graph.
However, the Top Lists graphs are empty (white) - nothing is shown.
Please assist. Thanks.
Article Comments
Hi Jürgen,
What actual PRTG versio...
Tue, 10 Jun, 2025 at 9:18 PM
Hi,
We have been asked to provide an output/audit of what we are monitoring within PRTG.
This is to include
Export Device -> Sensor -> Channel
I have ran the /api.htm to gather all sensors (which includes the devices and probes). ...
Tue, 10 Jun, 2025 at 9:18 PM
Does anyone have the mobile website working on a Windows Phone 7 device? My Samsung Focus will simply not find our webpage, despite both an Android and iPhone being able to access the same site via the HTML interface. I can access other web...
Tue, 10 Jun, 2025 at 9:18 PM
Hello,
can we expect push notification for Windows phone 8.1?
Thank you.
Article Comments
Yes, we will be releasing push notifications for Windows Phone as soon as we can.
Feb, 2015 - Permalink
Important note: PRTG f...
Tue, 10 Jun, 2025 at 9:18 PM
Is it possible to scan a QR code for a device, and have it open the device in PRTG for Android? Now that the mobile browser is gone, the standard browser is not really very nice to use on the mobile device.
Article Comments
H...
Tue, 10 Jun, 2025 at 9:18 PM
Hi Guys, i think i might have landed on a bug with the Widgets,
When i have more than 4 sensor channels selected for widget use i can only select from the first 4 that i choose when i try to actually add the widget to one of my screen pag...
Tue, 10 Jun, 2025 at 9:18 PM
I'm setting up sensors on PRTG to monitor Rx power levels (in dBm) on different transceivers.
However, MIB Importer gets integers from them, which after being divided into 100, end up giving me an mW value.
After that I have to use an ...
Tue, 10 Jun, 2025 at 9:18 PM
I want Highest Max.
HIGHEST AVERAGES (5 MINUTE INTERVAL)
SensorAverageMinimumMaximumProbe Group Device
COID_SW03_203.236.236.22_FW-(Juniper ssg-140) 0.52 Mbit/s 0.01 Mbit/s 9.30 Mbit/s Local Probe » Switch »203.236.236.13 (SW03)
...
Tue, 10 Jun, 2025 at 9:18 PM
Yesterday our PRTG Serve started asking to be activated. I am unable to activate eihter automatically or manually. I have enter license and other information without success. Please assist.
Article Comments
Dear keithshwartz22
...
Tue, 10 Jun, 2025 at 9:18 PM
Is it possible to adjust prtg to accept snmp v3 passwords less than 8 characters?
I receive following error:
Error in authentication password (at least 8 chars) (SNMP error # -2009)
Thanks
Grega
Article Comments
Hello there, ...
Tue, 10 Jun, 2025 at 9:18 PM
Hi guys,
We're well on the way with customising/modifying maps and objects, however, I can't work out if it is possible to exclude a specific device/sensor from the list of downed sensors.
I can understand why people may think t...
Tue, 10 Jun, 2025 at 9:18 PM
Monitoring the monitoring...
Is there a way to set PRTG to send a status message (kind of I'm alive and working fine) either thru some configurable notification or any other way?
I would like to avoid using PRTG Family tools as based ...
Tue, 10 Jun, 2025 at 9:18 PM
Occasionally the ping test shows a high ping and sends an alarm. I am unsure of if it possible to only have the alarm be sent after three or so consecutive failures on the part of the ping test, for example. If this can be crafted as such, ...
Tue, 10 Jun, 2025 at 9:18 PM
I have set up PRTG to monitor several server we have on site, as part of my daily checks I have to inspect disk space available on the server, is it possible to set up PGRT to email me the disk space of each server at a specified time ?
...
Tue, 10 Jun, 2025 at 9:18 PM
Hello,
I followed this tutorial : Monitoring LSI Raid
But i didn't know where is my "LSI-AdapterSAS.mib" MIB's file.
I want to monitor my RAID with sensor.
Error message with your tools but i activate SNMP Protocol...
Tue, 10 Jun, 2025 at 9:18 PM
We recently upgraded to the current release. In the prior release, we were able to send notifications using a EXE notification. A simple batch file to do a screen popup. Since the upgrade, these no long work. They work fine from a comma...
Tue, 10 Jun, 2025 at 9:18 PM
Hi,
We have 2 ISPs in house. Is there any sensor through which I can individually monitor bandwidth usage for both ISPs. I have tried sensors, with IP, Interface and Nexthop. But the results were not what I was looking for. Is there a wa...
Tue, 10 Jun, 2025 at 9:18 PM
Hi,
I have custom system using SNMP with different OID's which depend of it's configuration. I'll like to generate one config file from that system and import in PRTG which will make device with different sensors regarding OID...
Tue, 10 Jun, 2025 at 9:18 PM
I would like to test the site before authentication. For me it is only necessary the availability of the web site for authentication.
When I inform web site address, the page for authentication is already displayed. I am using Http and Htt...
Tue, 10 Jun, 2025 at 9:18 PM
Hello,
I am trying to setup a sensor (using the SSL cert sensor - perhaps that is my issue) to check the expiration and status of a wildcard certificate. I know I have the correct address and port, but the sensor just reads as down.
Soc...
Tue, 10 Jun, 2025 at 9:18 PM
What ist the correct line for create a new ticket via prtg-api?
I tried
http://[server]/api/addticket.htm?username=[myuser]&passhash=[mypasshash]&id=0&subject=Test&assigned=3301&content=contentcontentcontent&priori...
Tue, 10 Jun, 2025 at 9:18 PM
Since some days the PRTG server sends mail with "PRTG ist noch hier" in subject and an overview of tasks of the last 7 days.
Where can this be disabled?
Article Comments
Hello Mario,
Thank you very much for your kb...
Tue, 10 Jun, 2025 at 9:17 PM
I Have a Map that is shown on a wall board, It is set to login with a Specific account that only has access to Certain Things however it is showing alerts for things it doesnt have access to
Article Comments
This should be rat...
Tue, 10 Jun, 2025 at 9:17 PM
The SSL Security Check sensor and any VMWare specific sensor does not seem to work well together.
TLS v1.0 is, as it should, recognized as unsafe by the SSL Security Check sensor, but if we disable this version on the esxi or vcenter host...
Tue, 10 Jun, 2025 at 9:17 PM
Recently we started using PRTG to monitor our environment. Everything is working fine, and we are learning more and more each day what PRTG has and does for our company.
Only 1 problem is happening when we add a Hyper-V VM into our PRTG e...
Tue, 10 Jun, 2025 at 9:17 PM
Hello,
Since I upgrade my PRTG Network Monitor to 17.3.32.2339, all my email notifications stopped working.
With debug level activated I get the following debug message:
"Stat Disconnected.
Error sending "Email": Connecti...
Tue, 10 Jun, 2025 at 9:17 PM
We use a number of LAG connections on our switches and I want to be able to track bandwidth use in real time of the LAG, not the individual ports that make up the LAG. I have checked our hardware vendors and they do not have a custom MIB t...
Tue, 10 Jun, 2025 at 9:17 PM
Afternoon
I have having a strange issue in that since the 16th July, my ping latency has gone up massively.
A bit of background. I have 17 shops all connected back to HO via VPN connections. The HO has a leased line installed. Using ...
Tue, 10 Jun, 2025 at 9:17 PM
using standard SNMP sensor bandwidth/traffic monitor, any vlan interface shows zero traffic (both in and out)
I tried different vendors: Cisco Nexus and Brocade SX800
In CLI (Cisco) these fields are populated and counters are incresing:
F...
Tue, 10 Jun, 2025 at 9:17 PM
Is the logic for "Fans broken" and "Fault tolerant fans broken" in the HP healt sensor possibly incorrect?
The "Upper warning limit" is set to 0 and the help text states "Values above this limit will set...
Tue, 10 Jun, 2025 at 9:17 PM
Hello,
I upgraded PRTG to 17.1.30.1681, after that all my reports that try to generate PDF started to fail with error "%1 is not a valid Win32 application. (0xC1)".
If i ran the report as HTML i do not have any issues.
I restart...
Tue, 10 Jun, 2025 at 9:17 PM
Hi,
I tried to modify an report but without success! :(
What I need to do in this report (sensorlist no graph), is to remove entire SENSOR column. Also, on first column, I want to see only the DEVICE, not the full path PROBE,GROUP,DEVI...
Tue, 10 Jun, 2025 at 9:17 PM
Dear Support,
I want to ask you about "report setting".
why when i choose template with graph only or graph with data file. when a report is running, sending a result to my email, a graphic screen not showing in my report.
...
Tue, 10 Jun, 2025 at 9:17 PM
Hi, i would like to know how to set alarm sound to the specifiy sensors ( i mean not to the all alarm appear but the ones i want )
Thank you for your help.
Article Comments
Hello,
Thank you for the KB-Post. What do you have ...
Tue, 10 Jun, 2025 at 9:17 PM
Is there any way to automatically suppress or pause all the notifications that happen after an auto-update.
Currently after an auto-update we get dozens of notifications from the probes all going down and then coming back. This is noise a...
Tue, 10 Jun, 2025 at 9:17 PM
I have a custom .net c# executable that I created and it uses command line switches to retrieve different metric values from MSSQL and sends them back to PRTG.
I use this to monitor my production MSSQL db performance.
It all works well on...
Tue, 10 Jun, 2025 at 9:17 PM
https://www.paessler.com/manuals/prtg/ssl_certificate_sensor describes the sensor has having;
Days to expiration (with predefined lower warning and error limits)
However I cannot find any documentation of what these predefined limits are,...
Tue, 10 Jun, 2025 at 9:17 PM
wie kann man mehrere Geräte in eine andere Gruppe verschieben?
V17.2.31.1917
Article Comments
Hallo Herr Walther,
Sie können im Reiter "Management" mit Shift Click mehrere Geräte auswählen und per Rechtsklick &qu...
Tue, 10 Jun, 2025 at 9:17 PM
Hello, we are migrating a large number of users from our main PRTG server to a secondary. This is necessitating the movement of well over 1000 devices and subsequently more than 16000 sensors. Please tell me there is a way to copy the right...
Tue, 10 Jun, 2025 at 9:17 PM
Hi everyone,
I'm wondering if it's possible to "discuss" with the PRTG's server using Web Services ?
For exemple, can I add or delete a device, or modify a critical CPU threshold with Web Services?
Also, is it poss...
Tue, 10 Jun, 2025 at 9:17 PM
I have a server that will always trigger alerts during a specific time frame. Management is not okay with increasing the interval of the scanning or the state of the triggers but are okay with a permanent maintenance window during this very...
Tue, 10 Jun, 2025 at 9:17 PM
Dear Sir,
we have installed new baracuda link load balancer in our network,and we want to monitor that device with PRTG monitoring tool please explain the procedure how to configure baracuda LLD with PRTG
Thanks and regards
S...
Tue, 10 Jun, 2025 at 9:17 PM
Hi,
I am working on filters for my SNMP Trap Receiver Sensor.
I am stuck on the bindings part in the error filter section.
The device I am trying to incorporate has two states:
1. Error state with the trap
SNMPv2-MIB::snmpTrapOID.0 ...
Tue, 10 Jun, 2025 at 9:16 PM
I've added a custom sensor to my device. The sensor on PRTG constantly only shows "No Response (Error #2003)".
I downloaded and ran the 'SNMP Tester' tool with identical errors. A copy of the log is below:
------...
Tue, 10 Jun, 2025 at 9:16 PM
I am trying to add a DNS sensor to one of my DNS servers but keep getting a No Response PE002 error code. I have verified that the DNS service is running and it is serving dns requests correctly. My ping sensor is working fine. I am able...
Tue, 10 Jun, 2025 at 9:16 PM
I am looking for a way to store a document outlining the solution to an alert. In other words: If an alert gets raised then I'd like to point to a link which shows an article/instructions on how to fix the issue.
Article Comme...
Tue, 10 Jun, 2025 at 9:16 PM
I have been trying to raise a case through the "contact support" option on the PRTG AJAX Webinterface, but it keeps saying that the Support Bundling is Busy.
I did manage to successfully raise a case yesterday but since then hav...
Tue, 10 Jun, 2025 at 9:16 PM
I'd like to grab the sensor value, selected by channelid in json format:
api/table.xml?content=values&output=xml&columns=datetime,value_,coverage&id=123456&noraw=1&usecaption=true&count=10
returns the values...
Tue, 10 Jun, 2025 at 9:16 PM
Is there a way with thw API to retreive the last value from a particular Channel on a Sensor (Free Space F: on a Multi-Disk Sensor for example)?
Article Comments
Hello,
that should be possible with the API, and for example a c...
Tue, 10 Jun, 2025 at 9:16 PM
Is there a way to delay UP notifications, until a sensor has been UP for a minimum of X amount of time?
Say, don;t send me the UP alerts until the server has been UP for at least 5 solid minutes.
Scenario: we have a client who wants to no...
Tue, 10 Jun, 2025 at 9:16 PM
Hello.
I have created a Library to gather ping sensors for packet loss notification.
Library -> Add Library -> Library name: "ping packet loss"
I dragged and dropped the Local Probe to the Library's tree and editte...
Tue, 10 Jun, 2025 at 9:16 PM
Hello team.
We are having problems to connect to our PRTG server from Android APP.
We are 100% sure about the IP, port and credentials as are the information that we use to connect by web, but on Android APP we are receiving this messa...
Tue, 10 Jun, 2025 at 9:16 PM
batch file or vbscript required to get conection info using netstat on perticular ports on windows s
i was testing batch files using below script
@echo off
del c:\test\d.txt
c:\PsExec.exe \\server -u domain\username -p password netstat -n |find /c "IP/PORT" > c:\test\d.txt
for /F %%i in (c:\test\d.txt) do set myRESULT=%%i
ec...
Tue, 10 Jun, 2025 at 9:16 PM
Woran kann es liegen, dass es nach Regelmässiger Zeit auf überwachten Systemen zu einem Unterbruch der Überwachung der WMI-Sensoren kommt? Der Sensor gibt keinen Fehler raus, stoppt aber für ca. 2h die Aufzeichnung der Daten des Sensors. Im...
Tue, 10 Jun, 2025 at 9:16 PM
Hi,
I use an PRTG-Cluster with 2 Nodes.
Is it possible to use the web Interface behind an loadbalancer?
Regards
Michael
Article Comments
Hi Michael,
whyt exactly do you want to do? Do yo want to distribute the traffic with a ...
Tue, 10 Jun, 2025 at 9:16 PM
I monitor HP ESXi hosts with the VMware Host Hardware Status (SOAP) sensor.
I do get a warning for Power Supply 6 and Power Supply 7 which are not present at all.
Is there a way for the sensor to ignore these?
Article Comments
...
Tue, 10 Jun, 2025 at 9:16 PM
