kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
How can I export the system Log file created by the system to a CSV or Text file ?
Article Comments
Hello,
are you referring to the "Logs"-Page in the PRTG main menu or the "Logs (System)"-Folder in PRTGs d...
Tue, 10 Jun, 2025 at 12:24 PM
Hello,
I want to display the LIVE network usage that goes through my PFSense firewall.
Is there a way to display this live? And not have it refresh every 10 seconds.
Kind Regards,
Article Comments
Hi Sven,
How do you curre...
Tue, 10 Jun, 2025 at 12:24 PM
Dear Paessler,
The Disk Free sensor we're using outputs this alarm message:
"7 % (Free Space D:) is below the error limit of 10 % in Free Space D:"
We want to let the Disk Free sensor output the alarm message like this:
&q...
Tue, 10 Jun, 2025 at 12:24 PM
Hello
I'm looking for a solution in prtg maps to define conditions for a device to change its color based on other devices sensor status.(in other words I want one of my devices status be dependent to other device status.)
For example...
Tue, 10 Jun, 2025 at 12:24 PM
Can someone explain why my PRTG installation changed from port 443 to 8443 over the week-end?
Or how I can trace back how it happened?
Article Comments
Hello there,
When PRTG is (re-)starting and port 443 is not available, it ...
Tue, 10 Jun, 2025 at 12:24 PM
Hi Support,
i have a system running the same process name but with different parameters. So if i type ps -e then i get like 10 times the process "gacengine" running. But if i type ps -x i get the parameters to each process.
/o...
Tue, 10 Jun, 2025 at 12:24 PM
PRTG for Android no longer supports PRTG 9.x. How can I install an older version that does support it?
Article Comments
Hello there,
I'm afraid, this version is outdated for a long time and we do not provide any support ...
Tue, 10 Jun, 2025 at 12:24 PM
I've created a custom string sensor using a regex to covert to floating. I'm getting the appropriate value back, but PRTG is not making a channel for that data and the response time channel is showing no data/alarm. Thoughts?
...
Tue, 10 Jun, 2025 at 12:24 PM
I'm trying to get the REST Sensor to work with Nest, using Postman it works perfectly. I have the Authorisation code and the URL. With PRTG I get "expected status 200 OK but got 401 Unauthorized.". From reading the nest site ...
Tue, 10 Jun, 2025 at 12:24 PM
Hi,
What are the best practice settings for the ping sensor to monitor an connection
Ping Method - Send multiple Ping requests
Ping Count - ??
Ping Delay (in ms) - ??
What should I put on the "??" ?
Thnx.
Article C...
Tue, 10 Jun, 2025 at 12:24 PM
We have a number of snmp sensors for physical disks, but they don't give the oid they're retrieving. How can this be obtained?
Article Comments
What Sensors are you referring to exactly? Then I can provide the OIDs chec...
Tue, 10 Jun, 2025 at 12:24 PM
Wir haben unsere E-Mail-Benachrichtigungen so konfiguriert, dass bei einem fehlerhaften Sensor nach einer bestimmten Zeit eine E-Mail an eine definierte Gruppe gesendet wird und dann wieder wenn der Sensor wieder auf "OK" steht.
...
Tue, 10 Jun, 2025 at 12:24 PM
Hi, i've a PRTG console licensed, and with many probes installed.
Now, what I'm looking for, is a solution for monitoring and reporting sensor number during probe life; I'm not interested on a mail notification if sensor number ...
Tue, 10 Jun, 2025 at 12:24 PM
We recently had a problem with one of our groups in that none of the five WMI sensors were gathering information (though
It turned out that Microsoft's Threat Gateway was configured to allow traffic on port 135 from the remote probe ...
Tue, 10 Jun, 2025 at 12:24 PM
Hi there, I am creating a custom graph report and would like to highlight Saturdays and Sundays on the monthly graph. Does anyone know how to do this? I have successfully created a custom report based on Graph plus 365day graph.htm and rele...
Tue, 10 Jun, 2025 at 12:24 PM
i have a sensor that gives just two value : 0 , 1
i define limits in this sensor and set upper error limit = 1
i want when my sensor value = 0 my sensor in prtg is ok and last message is ok but when go to 1 my sensor goes down and down...
Tue, 10 Jun, 2025 at 12:24 PM
Dear PRTG Forum,
how can i delete multiple sensors at once.. i cannot use shift + select all non wanted sensors..
:(
it takes a very long time to delete 1 x 1..
HELP!
Article Comments
When you open the management tab in th...
Tue, 10 Jun, 2025 at 12:24 PM
Hallo,
ich habe für die Temperaturüberwachung unserer Serverräume einen HWg-STE.
Die MIB habe ich eingebunden und im Status steht die Temperatur.
Leider zeigt mir der Graf nur ms an.
Wie binde ich das IP Thermometer HWg-STE am besten ein.
E...
Tue, 10 Jun, 2025 at 12:24 PM
Dear Support Team
Sometimes we face these similar issues:
The aggregated graph (sensor factory) that shows in 2days or 30days tabs, is different from the same period in reports or historic data! (not in all time span of graph but in a p...
Tue, 10 Jun, 2025 at 12:24 PM
Hi All,
We have a set up where we have many probes. Each probe is a different customer as we are a service provider.
We would like some way to output a report of usuage in terms of how many devices under each probe and also how many se...
Tue, 10 Jun, 2025 at 12:24 PM
Dear Support Team
Is there an optional way to choose when a source channel adds or removes to a sensor factory (aggregation graph), its history included in sensor factory or not?
Kindly thanks for your guidance
Article Comments
...
Tue, 10 Jun, 2025 at 12:24 PM
Hallo,
für unser Map verwenden wir Zustandssymbol Name und Status(größenveränderlich). Kann man Größe von Symbolen ändern?
Schriftgröße von Sensorbeschreibung konnte man in An Icon A9.htm ändern, aber Einstellungen für Symbol selbst habe i...
Tue, 10 Jun, 2025 at 12:24 PM
Hi,
we are looking for an easy way to monitor network connectivity between our sites.
Not just from / to the main HQ but really each site to each site.
The basic idea we have so far is to create ping sensors at each site/probe.
Lets say...
Tue, 10 Jun, 2025 at 12:24 PM
Hello,
I am making calls to the HTTP REST API but it looks like the response returned by PRTG has the incorrect response content headers.
For example I make a call like:
GET /api/table.xml?username=prtgadmin&passhash=xxxxxx&cont...
Tue, 10 Jun, 2025 at 12:24 PM
Hi,
I'm testing PRTG right now for my network monitoring.
I have enabled netflow v9, but I can't find options to:
Generate historical reports with filters like source or destination IP.
Filter live netflow traffic by source o...
Tue, 10 Jun, 2025 at 12:23 PM
Hello!
Could you help me with a simple question?
I have an API what described as REST.
The URL is:
http://api.iqsms.ru/messages/v2/balance?login=mylogin&password=mypassword
The returned dataset is:
RUB;4914.04;0
There is no tags or ...
Tue, 10 Jun, 2025 at 12:23 PM
I have just installed evaluation copy and it auto-discovered when I did not want it to. How do I turn it off and why dont you put a simple dialogue on the installation asking if your potential customers want it. Or here's a thing why no...
Tue, 10 Jun, 2025 at 12:23 PM
Hello,
We are using Sophos Endpoint Protection and I want to get alerted when something changes on Sophos. Such as notifications from Sophos. Would like to make some custom sensors for that, however, I have no clue how that works with SNM...
Tue, 10 Jun, 2025 at 12:23 PM
I have a unique case where I need to monitor one carrier gateway device, while at the same time, monitoring another devices from another carrier/security company. The problem is, the carrier is not going down, the security company is. The s...
Tue, 10 Jun, 2025 at 12:23 PM
Hi I've upgraded my systems to Windows 2019.
My Master kept the same name, but the failover didn't.
After changing the name of my master, I get the warning that my license is in "temporary activation"
Also my FAILOVER ...
Tue, 10 Jun, 2025 at 12:23 PM
Hi,
is it possible to monitor HTTP Headers in PRTG?
For example i would like to monitor if in the HTTP response the header:
content-encoding: gzip
is included.
Or if a specific value is set in the "content-security-policy" H...
Tue, 10 Jun, 2025 at 12:23 PM
Hi!
I have device GoldTEMPer.
http://www.pcsensor.com/usb-thermometers/gold-temper.html
Can i plot temp graph from this device?
Device can write data to csv or txt file. Look like this:
NO,Temp,Time
1,24,25,2015-04-02 11:39:33
2,24,25,201...
Tue, 10 Jun, 2025 at 12:23 PM
Hello,
How can I monitor these values on ESXi 5.5 datastores:
% Idle Time (or % Disk Time)
Average Disk Queue Lenght (or Current Disk Queue Lenght)
?
Article Comments
Hello,
Thank you very much for your KB-Post. Curren...
Tue, 10 Jun, 2025 at 12:23 PM
Hello!
I have a lot of cisco devices connected to my PRTG, my boss ask me - can PRTG answer how current channel width?
For ex. if i have a network interface connected to my provider, i need to understand what channel speed (maximum spe...
Tue, 10 Jun, 2025 at 12:23 PM
Hello,
I'm trying to install sensors on a Juniper SRX 3400 cluster.
I want to monitor "health system" for each device.
I found this link, and followed the procedure.
https://https://helpdesk.paessler.com/en/support/...
Tue, 10 Jun, 2025 at 12:23 PM
Hallo zusammen,
ähnlich dem Feature "Sensor für x Intervalle auf Warning setzen, dann auf Down setzen", wäre ein Feature super, dass folgenden Fall abbildet:
1. Ein Sensor (Im Beispiel: Ping für Check der Internetverbindung) hat...
Tue, 10 Jun, 2025 at 12:23 PM
I would like to know that which command is used for ssh disk free sensor, is it using df -h or some other command.
Article Comments
Hi there,
You can lookup most of the used SSH Commands by logging in as the user you have defi...
Tue, 10 Jun, 2025 at 12:23 PM
Hi, the Windows Update Status sensor seems to be working fine, only it is showing as down:
(Updates (Severity Critical) Missing) is above the error limit of 0.20 # in Updates (Severity Critical) Missing — 2 # (Updates (Unclassified) Mis...
Tue, 10 Jun, 2025 at 12:23 PM
Hi,
I have created a custom sensor that retreives some values via powershell and hand them to PRTG afterwards. The sensor appeared to work just fine until this morning when it had to give an error, which it did not. The value my script re...
Tue, 10 Jun, 2025 at 12:23 PM
Hello!
I have task: Login into HTTPS web portal, open selected page on it, found line on those page and find the Value, then i need to set this Value in Sensor status. Which of standard sensor can help me with this?
Thank you!
A...
Tue, 10 Jun, 2025 at 12:23 PM
How to disable status "Unsual" on PRTG ?
Can I close the alert?
Article Comments
Hello cmmourinho,
Thank you for contacting Paessler Support.
The unusual detection can be configured globally under Setup > Moni...
Tue, 10 Jun, 2025 at 12:23 PM
My PRTG installation shows a note that the Mobile Web GUI is deprecated and not maintained anymore. There is also the information that Paessler will completely remove this slim user interface soon.
When will PRTG's Mobile Web GUI dis...
Tue, 10 Jun, 2025 at 12:23 PM
Dear Paessler,
I using default notification PRTG VIA Telegram.What placeholders (variables) can I use For CPU load, RAM,Free disk space and ping via telegram ?
Article Comments
Well, basically you can use %lastvalue and %last...
Tue, 10 Jun, 2025 at 12:23 PM
Very new to setting up SNMP test. In fact this is my first time but got an issue with the following.
I'm trying to set up some SNMP testing with our Red Box Recording system. They've provided a MIB file which I've used the Pa...
Tue, 10 Jun, 2025 at 12:23 PM
Hello! Can i with DNS sensor send a request to multiple name (addreses)?
For example: google.com, yandex.com...
Or only one domain at one sensor?
Article Comments
The DNS Sensor actually checks the DNS Server within your net...
Tue, 10 Jun, 2025 at 12:23 PM
I am installing the PRTG (18.4.45) on the windows server 2016 which consist of 4 processor and 16GB memory. Also adding the network devices detail for the monitoring. But the cpu utilization of the local probe device is always high (greater...
Tue, 10 Jun, 2025 at 12:23 PM
Title says all,
Is it possible to add GIFS in the map editor with custom HTML?
Article Comments
Hi Sven,
That's rather simple. To have a scalable map object that has a GIF as a background, use the following code in the &...
Tue, 10 Jun, 2025 at 12:23 PM
Hi Paessler Team,
I have two cores, one core in Germany and another in Portugal.
The core of Germany is configured with a datacenter and its network equipment and servers, and is also configured with 17 probes (network equipment and servers...
Tue, 10 Jun, 2025 at 12:23 PM
Hello!
We have Siemens HiPath 4000 PBX station, have anyone success story of it System Health or Statistics monitoring?
Thank you!
Article Comments
Vasiliy,
I was able to locate the following MIB file for the 4000 series f...
Tue, 10 Jun, 2025 at 12:23 PM
Hi Guys,
We are frequently having issues with the 50 user limit on the Cisco ASA Vpn users sensor. Is there any way we can manually extend the limit of users on the threshold or is there any other suitable sensor to use?
The VPN will con...
Tue, 10 Jun, 2025 at 12:23 PM
Hello
We would like to monitor users on our Cisco ASA VPN, more specifically, the length of time their session is connected for.
I know it is possible to monitor the number of connections, if they are offline etc, but I have not found a...
Tue, 10 Jun, 2025 at 12:23 PM
Hi,
PRTG sometimes sets a comment on a device automatically. I did'n knew that. And now, after i cloned many many devices, i have many comments in that devices not showing correct Content. Because i don't use the "Comments&qu...
Tue, 10 Jun, 2025 at 12:23 PM
Hallo,
ich habe ein Problem mit dem Microsoft SQL v2 Sensor.
Der Sensor im PRTG zeigt folgenden Fehler:
Fehler bei der Anmeldung für den Benutzer 'DOMÄNE\admin'.(Connectionstring: Data Source=xxx-sql;Initial Catalog=xxdaten;Us...
Tue, 10 Jun, 2025 at 12:23 PM
After replacing a Device, we have to create the new Device in PRTG. In most cases, the old Device cannot be deleted because of traceability of the historic data (such as Bandwidth, uptime …). Actually, the old Device must be set in “indefin...
Tue, 10 Jun, 2025 at 12:23 PM
Hello,
I have a TV setup on which I display 2 maps with specific sensors that need to be monitored 24/7. I would like to have audible alarms go off whenever something on that map goes red. Right now, I can get audible alarms on that map b...
Tue, 10 Jun, 2025 at 12:23 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
Many issues are cyclic. for example a monthly CPU at 100% during...
Tue, 10 Jun, 2025 at 12:23 PM
In 13.2, how can we remove the Latest News area? One of your KB items makes reference to there being a registry key to modify, but I cannot locate any further information.
Article Comments
This article applies to PRTG 13.x.3 unt...
Tue, 10 Jun, 2025 at 12:23 PM
I would like to know if it is possible to create a custom css containing some elements used in the bootstrap, type alerts, panels, labels. Can you give an example?
Article Comments
We're using a very stripped down bootstrap,...
Tue, 10 Jun, 2025 at 12:23 PM
hello anyone can help me?
in Notification Summarization method i choose >> Send first DOWN and UP message ASAP, then summarize
time 60 minute
if one device sensors turn off, then prtg send me first down message,then he begins collect...
Tue, 10 Jun, 2025 at 12:23 PM
Hello,
Is it possible to create one sunburst that include:
Subgroup A,C
Subgroup B,C
Subgroup C,C
I tried it with factory Sensor, but i have just a Object ID and no Channel ID.
Example Device tree:
Group A
Subgroup A,A
D...
Tue, 10 Jun, 2025 at 12:23 PM
I don't want to see the help boxes on all web pages of PRTG. How can I turn them off?
Article Comments
This article applies to PRTG Network Monitor 13.2.3 through 17.3.33
Hide Help Box
Important note: The current customi...
Tue, 10 Jun, 2025 at 12:23 PM
Ist es möglich, bei den Datentabellen auf der Map (z. B. alle Fehler-Sensoren, alle Warnungen) einzustellen, welche Infos in der Datentabelle angezeigt werden? Mir würde es z. B. reichen, wenn der Sensorname, Status, letzter Wert und Geräte...
Tue, 10 Jun, 2025 at 12:23 PM
There are several Win7 Ultimate endpoints configured with WMI sensors. They will work initially but over time the same sensors will fail with "Connection could not be established (code: PE015)". Researching this error directed m...
Tue, 10 Jun, 2025 at 12:23 PM
Hello
Can i change the email address from a prtg user (not ad user) with a script or with api?
Article Comments
Hi Thomas,
The official "change object"-API is not supporting this. However you could use the API that P...
Tue, 10 Jun, 2025 at 12:22 PM
How to detect arp within SFARM vlan, eg. when new arp/ip add on at the SFARM vlan, then PRTG will monitor and give alert .
Article Comments
Could you elaborate, i.e. link to the appliances you're using? I'm having a hard...
Tue, 10 Jun, 2025 at 12:22 PM
1)i want to receive from prtg first down and up message from all devices for example(device 01 device 02 device 03)and so on.
2)FOR EXAMPLE :during 60 minutes i dont want to get same devices notifications,maybe they died or reviving to m...
Tue, 10 Jun, 2025 at 12:22 PM
Hi,
Is it possible with a sensor or a script to check an exhange mailbox for a specific mail.
Article Comments
Hi Mike,
This will be possible with the IMAP Sensor. You can define the name of the target mailbox in the settin...
Tue, 10 Jun, 2025 at 12:22 PM
Dear, good afternoon, turn around and I have problems with my e-mail sensor, what would be the final solution to solve this error?
sensor SMTP&IMAP Round Trip
Article Comments
Hello Daniel,
Thank you for your KB-post.
...
Tue, 10 Jun, 2025 at 12:22 PM
Hi. we have around 50 snmp devices monitoring Cisco Switches.
In particular for example we have "System Health CPU" sensor which I want to update all CPU channel's with upper warning limit.
Some on the channels are calle...
Tue, 10 Jun, 2025 at 12:22 PM
Hallo Paessler Team,
auf der Website wird in der Script World das Feature "PRTG Device System Information export" angeboten.
Leider referenziert dieses nur die Admin-Shell, jedoch nicht das eigentlich benötigte Modul: get-
syste...
Tue, 10 Jun, 2025 at 12:22 PM
I have read other post and they have not given me a solution.
2018-12-03 12:33:55 10.20.9.20 "anonymous-prtgadmin-login_failed" 10.20.9.20 443 POST /api/getstatus.htm login=prtgadmin&passhash=*&id=0 200 "Mozilla/5.0 (...
Tue, 10 Jun, 2025 at 12:22 PM
Dear all cases that are in low state are no longer alarmed, the status is in the warning state. Follow print of a down device.
Message displayed on sensor
Channels not available (Disable in settings to supress):intraffic, outtraffic
...
Tue, 10 Jun, 2025 at 12:22 PM
hi guys
We've just got an alarm for an HTTP sensor that has been fine for over a year. Nothing seems to have changed on the device and on check there is no specified target url in the sensor settings. What was this successfully report...
Tue, 10 Jun, 2025 at 12:22 PM
Dear all,
I am currently facing an issue. We have some problems with our network at a foreign location and I would like to monitor how many bytes are going in and out. Problem is, the switch in common does not have an configured IP addres...
Tue, 10 Jun, 2025 at 12:22 PM
Hi there,
I created a device template with 3 simple probes. Ping, Free Disk Space, Uptime.
I created a new auto-detect group and chose this template.
When it scanned, 2 of the machines had all the probes and 2 of the machines only had...
Tue, 10 Jun, 2025 at 12:22 PM
Is it possible to not affect the downtime when we are in simulate error status ? If not, it could be a good idea.
Thx
Article Comments
Hello,
No, because when you simulate an error status, the simulated status is logged in lie...
Tue, 10 Jun, 2025 at 12:22 PM
Hi, would it be possible to configure showing a popup displaying a graph when hovering over another object (such as gauge meter) on a map?
Article Comments
Kaeon,
I think it would be, but my coding skills are not what they use...
Tue, 10 Jun, 2025 at 12:22 PM
Any prediction for a linux version?
Article Comments
Hello,
Thank you very much for your KB-Post. We do not plan a Linux version of the Enterprise Console in the near future. Sorry.
best regards.
Aug, 2016 - Permalink
...
Tue, 10 Jun, 2025 at 12:22 PM
I have build I custom report that lists top 10 ping filters by failedreqper which works great.
<div><#report type="statstable" columns="sensor,average,minimum,maximum,failedreqper,probegroupdevice" count="...
Tue, 10 Jun, 2025 at 12:22 PM
Bonjour,
nous rencontrons un problème dans la supervision d'un équipement distant (par internet). Par exemple, si nous perdons la connexion vers cet équipement pendant 10 minutes, le capteur ping restera dans l'état non fonctionnel ...
Tue, 10 Jun, 2025 at 12:22 PM
what I am trying to go is remove several devices and sensors. I would like to see if there is a way to export the devices. At a later date we can import those devices back into PRTG.
We are not migrating to a new server.
Article Com...
Tue, 10 Jun, 2025 at 12:22 PM
I have wrote a PowerShell script to use the "HTTP Push Data Advanced" sensor:
$prtgresult = '<prtg>
<result>
<channel>Message</channel>
<value>1</value>...
Tue, 10 Jun, 2025 at 12:22 PM
I need install a sensor in PC (windows), i need monitor memory and have this error
Article Comments
Hey ecaldas,
The error message shown (SNMP error # -2003) indicates a timeout and/or that PRTG is not able to receive the req...
Tue, 10 Jun, 2025 at 12:22 PM
Hi,
Is there an option in PRTG or way to configure it that the webinterface and maps are only accessible from selected IPs? So not that you can try to login from every possible network.
Thanks!
Article Comments
Hello Sven,
...
Tue, 10 Jun, 2025 at 12:22 PM
I have succesfully added a nice set of monitoring sensors in PRTG, but I am missing an sensor to monitor the I/O load on the SAN. Is there any available ?
Article Comments
Dear Henk van Beek
The SSH SAN Physical Disk sensor sh...
Tue, 10 Jun, 2025 at 12:22 PM
Is it possible from the API, to modify the access rights of a user on an object?, I try with
/api/setobjectproperty.htm?id=[id_of_object]&name=accessrights_[id_of_user]&value=[-1,100,200,400], but even though it answers OK, it has n...
Tue, 10 Jun, 2025 at 12:22 PM
Hey Guys,
Just a quick question, on the Meraki AP statistics sensor, what is the sensor actually monitoring for? In terms of what will put that sensor in a down state and what are the ways to alter these thresholds.
Thanks
Archie
...
Tue, 10 Jun, 2025 at 12:22 PM
Hello everybody,
We currently have the problem that the PRTG Core Server service only starts up for a short time and then ends.
We have already restarted the server. The following error is stored in the event display: Trying to restart PRTG...
Tue, 10 Jun, 2025 at 12:22 PM
Why is not the SQL Server Port configurable but the Instance Name property of the device?
In my opinion, this would not only be an enormous relief to set up a sensor but also incomprehensible, since this property has the same importance as ...
Tue, 10 Jun, 2025 at 12:22 PM
Hello, is it possible to approve a remote probe from the API or using powershell?
We have seen some scripts published that allow to automate the installation process of remote probes, but all require the manual approval of each remote pr...
Tue, 10 Jun, 2025 at 12:22 PM
Is there a document on all the parameters that the report template uses.
For example:
<#report type="list" ...> What parameters are accepted here and what does each parameter mean.
<#report type="statstable&quo...
Tue, 10 Jun, 2025 at 12:22 PM
my devicetemplates have multiple sensors like system health, temperatures,... and now i want to add the uplink interface. For this i have to add this to the template but every time i want to create a new template out of a perfect configured...
Tue, 10 Jun, 2025 at 12:22 PM
hi
i worked with prtg ver: 17.3.33.2753+ and i cant upgrade my prtg, could you help me i want deleted ticketing database and start for first ticket number .
Article Comments
The ticket database resides in PRTG's data directo...
Tue, 10 Jun, 2025 at 12:22 PM
Is there a way to send emails notification to a certain group?
For instance, we would like to send emails nottification to the Intergration team regarding the servers/sensors that are managed by them and through another group send emails no...
Tue, 10 Jun, 2025 at 12:22 PM
I use the Microsoft Cluster Service (MSCS) and want to know which node the active one in the cluster is. Can PRTG help me to find this out?
Article Comments
This article applies to PRTG Network Monitor 16 or later
Monitoring A...
Tue, 10 Jun, 2025 at 12:22 PM
I need a PRTG sensor for my client that provides a total number of active directory users that are in the Citrix) group. This will be useful for me to track user count for license billing.
Article Comments
Please check the ADGro...
Tue, 10 Jun, 2025 at 12:22 PM
Hi,
I am realy new to prtg, and try to make a sense of the bandwidth monitoring of prtg.
I have a server 2008 R2 SP1, I have setup a snmp V2 sensor and also Windows NIC sensor for the same server.
For the snmap the setting is to use 64 bi...
Tue, 10 Jun, 2025 at 12:22 PM
how can i export all notification that i define for all sensor with api in xml file
Article Comments
Dear kamonitor,
this is not possible. The notification triggers per object can be reviewed only manually.
However, you can ...
Tue, 10 Jun, 2025 at 12:22 PM
Dear Support Team,
Is it possible to applying threshold of a sensor, only in a specific time of day?
Thank for your helps
Article Comments
Not officially, but PRTGapi (see my signature) may do this:
# Set the upper error limit...
Tue, 10 Jun, 2025 at 12:22 PM
I'd like to create a sensor, which displays the daily increment of a file (or database).
How can I accomplish this?
Factory Sensor?
Many thanks in advance for some advise.
Article Comments
The are file size and databas...
Tue, 10 Jun, 2025 at 12:22 PM
