kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I am new to PRTG, just trying the demo right now and setting up lots of devices and sensors. For my Exchange 2010 monitoring, I have a list of about 100 objects to monitor via WMI (got the list from MS Technet).
I want to setup all thes...
Tue, 10 Jun, 2025 at 10:22 PM
Is it possible to move a map object further left than 0?
I can move things on the right side a bit off the map to accommodate my background but I am having a hard time doing this on the left side of the map. Hopefully this is clear...
...
Tue, 10 Jun, 2025 at 10:22 PM
Trying to setup a new sensor in PRTG to monitor our PAN Firewalls, when I try to add a new sensor using the correct MIB library from the PAN site I keep getting a Error 2003.
I have triple checked the SNMP options on both devices and can...
Tue, 10 Jun, 2025 at 10:22 PM
I have downloaded the Avaya IPO MIB files and I'm sorting through them with the Paessler MIB import tool. It's a little difficult to make heads or tails out of the sensors they have. There are a ton of MIB files and finding useful...
Tue, 10 Jun, 2025 at 10:22 PM
Hi
We have successfully configured Netflow sensors in PRTG , for our Cisco routers.
NBAR protocol is now configured on the Cisco router. How do I configure the sensors to pick up the data exported by Cisco routers to PRTG server?
Ar...
Tue, 10 Jun, 2025 at 10:22 PM
We have a DIVA tape drive connected to a Windows server. There is an executable on that Windows host that I can run to query the status of all the tape drives.
We have a powershell script to run the EXE and get back the results. Can I ...
Tue, 10 Jun, 2025 at 10:22 PM
I have a device that gives warnings for weak public key length and "unable to check revoked status". I would like to continue to monitor the up status of that SSL port but don't want warnings, I want a full "up and green&...
Tue, 10 Jun, 2025 at 10:22 PM
Hi,
I am unable to get disk space data for a remote windows AWS machine as connection to the machine is not established.
I tried using DNS name instead of IP. My credentials are correct. I have used computername and 'localhost' as...
Tue, 10 Jun, 2025 at 10:21 PM
using prtg network monitor 13 .after 10 day working perfectly my probe heath goes red and by clicking on it it say simulated error pe034. how can i resolve this problem .restarting server doesn't solve the problem and it is still red
...
Tue, 10 Jun, 2025 at 10:21 PM
I'm trying to set up PRTG to monitor my backup jobs as described in this article -
https://helpdesk.paessler.com/en/support/solutions/articles/76000063291-how-can-i-monitor-my-backup-software-to-be-sure-backup-succeeded-last-night
S...
Tue, 10 Jun, 2025 at 10:21 PM
Hello,
I've been having trouble setting up text where I want it to be. Another KB article says we need to use the custom html object to add text to maps. This works okay in the middle of the map, but not for text at the top of the scr...
Tue, 10 Jun, 2025 at 10:21 PM
someone has monitored avaya ip office 500?
i try import with mib importer 3.4.8 from mibs DVD avaya but appear error when Import
"missing import module:itu-alarm-tc-mib" ( the same error to all mibs)
i foud this article rele...
Tue, 10 Jun, 2025 at 10:21 PM
Hi,
If I install a probe I get a message on my PRTG system that a new probe has been found. Once I click accept. It show disconnected and can't connect. The error log from the probe looks like this.
5/23/2016 2:56:58 PM Start Connec...
Tue, 10 Jun, 2025 at 10:21 PM
Quiero modificar un informe a tres meses, que me genere una tabla con los promedios de los últimos tres meses por separado y general de cada sensor a seleccionar.
Article Comments
Dear Oscar,
Please note that we officially off...
Tue, 10 Jun, 2025 at 10:21 PM
Quisiera saber com puedo pasar la base de datos a un archivo excel o SQL, para poder modificar las tablas a mi manera.
Article Comments
Hi there,
We are primarily able to provide support in English. Google Translate however to...
Tue, 10 Jun, 2025 at 10:21 PM
No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passw
Hi,
I cannot use PRTG to monitor the CPU usage via SNMP.
I used the tester and here is the return.
----------------------- New Test -----------------------
Paessler SNMP Tester 5.2.2
3/10/2016 3:18:17 PM (1 ms) : Device: 10.68.24.152
3...
Tue, 10 Jun, 2025 at 10:21 PM
hello i want to make an element on the map in which the text inside it will change to different values from sensors.
i was thinking about javascript but i found out that that doesnt work inside of prtg itself
Article Comments
Hi...
Tue, 10 Jun, 2025 at 10:21 PM
I asked before if it was possible to add a file attachment directly to the automatic email that is sent out and was told that this was not possible.
Is it possible to edit the text of the email that is sent out so that I can insert a MIME...
Tue, 10 Jun, 2025 at 10:21 PM
How many numbers of Remote Probe in PRTG free License.
In PRTG free License numbers of Sensors limited to 100, What about Remote Probe
Article Comments
The number of your remote probes is never limited. Only the amount of sensor...
Tue, 10 Jun, 2025 at 10:21 PM
Hi
I saw the post about monitoring the size of Mailboxes on this one
https://helpdesk.paessler.com/en/support/solutions/articles/59749-monitoring-quotas-on-exchange-2010-user-mailboxes
and i have the same problem.
With the sensor Exc...
Tue, 10 Jun, 2025 at 10:21 PM
There seem to be a problem with the last Preview update:
The link and the exe itself of the Administration Tool shows no correct symbol.
If you try to get the properties, the Windows Explorer freezes.
Starting of the tool also fails...
...
Tue, 10 Jun, 2025 at 10:21 PM
Hello!
I need help - again :)
1. On my PRTG page in root directory 27.0.0.1 i have 3 devices.
- beebox
- lan controller
- rasberry pi 3
I want to make a window where i can see 2 sensor from first devices, 3 from second and 1 from last devic...
Tue, 10 Jun, 2025 at 10:21 PM
Translated = The expression must result in a node"
I have a rest interface which give the following json output
{"configuredState":"STARTED","realTimeState":"STARTED"}
I have tried unsucces...
Tue, 10 Jun, 2025 at 10:21 PM
Hi,
I am trying to add the sensor Active Directory Replication. I keep getting Access is denied unless I add the domain account as Domain Admin.
Is there a way to add this sensor with a user that does not have Domain Admin permissions?...
Tue, 10 Jun, 2025 at 10:21 PM
I tried to add the WMI smart-sensor, but got the same error as here: https://helpdesk.paessler.com/en/support/solutions/articles/76000063550-my-dell-poweredge-sensor-fails-to-validate-disks-and-i-cant-add-it-what-can-i-do
Serial numbers a...
Tue, 10 Jun, 2025 at 10:21 PM
We're going to have many core systems (ten so far) worldwide with different login URLs. Is there a way for us to put in a custom menu entry that will drop down our core servers and their URLs?
Article Comments
Dear Mike
C...
Tue, 10 Jun, 2025 at 10:21 PM
Which level of access (read, write, full, admin) is the minimum needed to pause or acknowledge a sensor?
Article Comments
Hello there,
The user-group needs to have Write access granted for those operations.
Kind regards.
...
Tue, 10 Jun, 2025 at 10:21 PM
I've configured SNMP v3 on a Cisco 6880-X-LE switch and discovered it with PRTG. Works fine, but it does not show the interface names as expected. I've changed the Port Name Template for the particular group to "[ifalias] [ifna...
Tue, 10 Jun, 2025 at 10:21 PM
Hi,
We have recently installed PRTG network monitor on Windows server 2012 R2. When I launch the PRTG Enterprise console, it connects to 127.0.0.1. Is this the expected behaviour. My server IP is 10.XXX.XX.XX; if I force it connect to only ...
Tue, 10 Jun, 2025 at 10:21 PM
Hello.
I Have a custom MySQL sensor returning some values and they're displayed as channels on each sensor.
Now I'm trying to make a custom map object that consists of the Devices -> Gauge Small, but instead of only the sensors...
Tue, 10 Jun, 2025 at 10:21 PM
I have a cisco WLC. I want to monitor the MAC address. I have selected the custom option and selected MAC address however the mac address is not getting populated. Thank you.
Article Comments
Hi there,
This is most likely the ...
Tue, 10 Jun, 2025 at 10:21 PM
Hello, how are you?
I have extensively studied the PRTG because I want to use in my business. But before buying it, I'm doing some tests and one of them is to use two servers to do the monitoring. My idea is to use a key to monitoring a...
Tue, 10 Jun, 2025 at 10:21 PM
I want to set the sms api, directory where files are there ??
If you set the file where Will is up ??
Article Comments
Hello,
thank you for your post.
I'm not sure I understand the question, but please review the followi...
Tue, 10 Jun, 2025 at 10:21 PM
We have almost 8000 sensors installed. Is it possible to segregate the disk drive sensors down. I am aware that from log>status changes>down we can see the latest down alerts of all the sensors. Is it possible to see only the disk iss...
Tue, 10 Jun, 2025 at 10:21 PM
Hello, guys! Is that possible to change the web server port to other than 80 and 443?
Article Comments
Hi there,
You can log onto the PRTG host and change the webserver port via the PRTG Administrator Tool. This will also be p...
Tue, 10 Jun, 2025 at 10:21 PM
how i can monitoring my ibm v7000 storage, if is'nt possible i need know why?
Article Comments
Hello,
Thank you for your KB-Post. According to a quick google research, it should be possible to use SNMP to monitor the v7000...
Tue, 10 Jun, 2025 at 10:20 PM
We are using SNMP to monitor free disk space on varies devices. How can we set the threshold to warn at 20GB and go into a critical state say at 15GB? We have found how to change the setting from Free Disk % to Bytes but not the spot to cha...
Tue, 10 Jun, 2025 at 10:20 PM
Trying to get PRTG to execute the below powershell script under a Custom EXE/XML Advanced sensor. Never get a result in PRTG for 'State', however the script runs fine in powershell and receives the below successful output when run i...
Tue, 10 Jun, 2025 at 10:20 PM
Hi there,
Is it at all possible to capture a MAC address of our Ubuiqiti estate using PRTG?
Many thanks
Article Comments
Hello,
thank you very much for your KB-Post. I'm very sorry, but PRTG can't produce a list o...
Tue, 10 Jun, 2025 at 10:20 PM
Is there still no sensor that can handle Cisco ASA IKEv2 Tunnels automatically?
Do we still need to use that clumsy workaround released way back in 2013, creating each and every tunnel sensor manually?
Best
Peter
Article Comments...
Tue, 10 Jun, 2025 at 10:20 PM
Hi, we have generated monthly reports and we have enabled percentile set to continuous. In our monthly reports, do you know why the 95th percentile value that is generated in the pdf under the channel table does not match on the 'Percen...
Tue, 10 Jun, 2025 at 10:20 PM
I'm monitoring several users PC's that connect both when on the Network LAN and via VPN using the DNS name. i would like to be able to also display the IP address of these devices and have it show up in the notifications as well. Ho...
Tue, 10 Jun, 2025 at 10:20 PM
I'm trying to Generate notifications based on interface utilization. I know I can set limits at the sensor level but I'm currently tracking about 18K sensors, which makes setting limits at that level no a valid solution. Anyone have...
Tue, 10 Jun, 2025 at 10:20 PM
Hi All,
I'm attempting to print a bunch of QR codes using the hidden qr code feature within PRTG.
For some reason no matter what device or browser I print from or to they are always coming out pixilated and unusable.
I've attem...
Tue, 10 Jun, 2025 at 10:20 PM
HI,
I need to monitor the size of OST file and alert when it become 19GB large.
Article Comments
Hello.
You can use the File Sensor to monitor the size of any file as long as it is on a SMB share acessible by PRTG or on a Probe...
Tue, 10 Jun, 2025 at 10:20 PM
Hi
Can the Traceroute sensor's maximum hop count be tweaked? It maxes out at 30 hops, but one of our monitored devices is now 31 hops away. The sensor throws an error saying the host didn't respond, which isn't true.
Thank...
Tue, 10 Jun, 2025 at 10:20 PM
Detailed Error Information:
Module IIS Web Core
Notification MapRequestHandler
Handler StaticFile
Error Code 0x80070002
Requested URL http://127.0.0.1:80/home
Physical Path C:\inetpub\wwwroot\home
Logon Method Anonymous...
Tue, 10 Jun, 2025 at 10:20 PM
Hallo zusammen,
ich hab da mal ne Frage:
Ich möchte die Zählerstände aus unseren OKI Druckern ermitteln. Wir haben Farb- sowie Monochrome Systeme.
Also muss ich die Zählerstände für die gedruckten Farb und S/W Seiten getrennt ermittel...
Tue, 10 Jun, 2025 at 10:20 PM
Hello,
I would like to ask how to request free disk space of a database server - but not the free space on the local built-in disk array but on the attached storage system.
All kinds of WMI sensors failed - they all only find the server...
Tue, 10 Jun, 2025 at 10:20 PM
Hi Support,
Can you please advise the method to disable DH Export suites for PRTG (latest version).
AS per this security advisory - https://weakdh.org/sysadmin.html
I've found this regkey, and the CipherLevel DWORD, but not sure ...
Tue, 10 Jun, 2025 at 10:20 PM
After changing the domain admin password all Windows Print Queue sensors stopped working and I am unable to create any new sensors. I did run the WMITest.exe program on the probe's host server with success. The only sensor that seems to...
Tue, 10 Jun, 2025 at 10:20 PM
Is it possible to get data from PRTG, with powershell? Has anybody done that before?
I would like to receive data like disk-usages and uptime-information.
Article Comments
Hi,
Sure, this is possible. PRTG offers an HTTP API w...
Tue, 10 Jun, 2025 at 10:20 PM
Hello
It seems complicated to find how to create a PSSession to a remote server which is not an Exchange server.
This works only for an Exchange server:
$session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri &q...
Tue, 10 Jun, 2025 at 10:20 PM
Gday,
Please let me know, is there a way to connect a PRTG agent via sync file communication system?
We have a lot of assychronous systems which works under Linux with UUCP and uux system. Those systems are speaking from different geo ...
Tue, 10 Jun, 2025 at 10:20 PM
Is there a way to show using a custom map object a library as a sunburst.
We need to have a way to show are enterprise services to others and it seems libraries are the way to do it. I have seen code to display a custom map from a libra...
Tue, 10 Jun, 2025 at 10:20 PM
Is it possible to monitor subject of email in shared/public folder in Exchange 2013?
It is not possible to do with the IMAP sensor, since exchange 2013 does not allow/support accessing shared folders over IMAP.
Article Comments
...
Tue, 10 Jun, 2025 at 10:20 PM
Last Message Error in FileSystem Overall Status: 'Full'
This error occured on Friday night. It is a channel part of Netapp System Health Status. Can someone please define what this channel is monitoring and why it is giving an e...
Tue, 10 Jun, 2025 at 10:20 PM
Hi there
While testing the new SQL v2 Sensors we realized that the concerning sql-files have to be uploaded to the Server that runs PRTG.
Unfortunately not all of our Users implementing Sensors have access to the Filesystem of the PRTG-...
Tue, 10 Jun, 2025 at 10:20 PM
I would like to build a new map for each of my offices that shows my Edge router, Riverbed Steelhead and any access switches. The purpose of this map is like a CDP neighbor. I want to show the links between all of these devices so I can s...
Tue, 10 Jun, 2025 at 10:20 PM
I am monitoring our Server room with a APC Netbotz 450 and have imported the mib file into PRTG.
I would like to see a history of the temperature and humidity but only response time and downtime is shown when looking the the sensor. The loo...
Tue, 10 Jun, 2025 at 10:20 PM
How do I enable SNMP on the ESXi host to be able to monitor it using SNMP
Article Comments
it is as simple as running the following commands on your individual hosts from a console session. Replace YOUR_STRING with the community...
Tue, 10 Jun, 2025 at 10:20 PM
We have a single core server but we are getting lots of probe health errors and losing flows. We are trying to come up with a way to split the load between multiple core servers. Currently we have:
Database Objects
Probes 71
Gro...
Tue, 10 Jun, 2025 at 10:20 PM
Is there a way to connect to a switch via SSH or Telnet within PRTG (or issue a connection via putty via PRTG)?
Article Comments
Hi,
you might have a look at the built in SSH Sensors of PRTG. Additional, you also might use putt...
Tue, 10 Jun, 2025 at 10:20 PM
I have to generate a report every month for all my servers showing the average memory, cpu and disk utilization.
Currently, I am manually going to the portal and generate the reports and sent them to my email. Then I read the value for ...
Tue, 10 Jun, 2025 at 10:19 PM
Hi all,
I would like to know if the is a way the Monitor a PRTG Server over HTTP trought an other PRTG Server.
What i would like to monitor:
- Is the Server UP
- Last check from any Sensor / Last Data
- Number of Sensor with state...
Tue, 10 Jun, 2025 at 10:19 PM
Hello,
We are checking PRTG to use like monitoring system in a proyect in Mozambique, links that we have there are 250kb ... becasue are using for airport system.
We want to monitoring CPU usage of Cisco switches and bandwith of those l...
Tue, 10 Jun, 2025 at 10:19 PM
Hi Paessler
When I press the settings tab in the Enterprise console I get the error: Error -312 when loading url http:prtgserver/wingui_editdata.htm?id=2233&login=user&password=secret
Can you assist.
Br.
Bjorn
Article...
Tue, 10 Jun, 2025 at 10:19 PM
I just setted up a Raspberry Pi 2 with the newest version of rasbian.
I have completed the setup for linux miniprobe to connect it to prtg.
The miniprobe works 100% and cpu, ram ect. works fine in prtg.
The temperature sensor works in the...
Tue, 10 Jun, 2025 at 10:19 PM
In the company I work, we use the command Robocopy in a bat file with the Windows Task Scheduler to run some backups, every backup creates a log file with the name following the pattern: Full_"%date:/=_%".txt . I would like to kno...
Tue, 10 Jun, 2025 at 10:19 PM
I am trying to setup a report for a customer, it will show multiple sites "Ping" and "bandwidth" sensors.
By using the sensor list report template, I am able to build a report with "Ping" sensor: 'Result...
Tue, 10 Jun, 2025 at 10:19 PM
My old monitoring system was able to monitor windows services natively via SNMP. I am trying to figure out how to get PRTG to do this. We have over 500 windows servers and I am trying to avoid going the WMI route. Right now PRTG through SNM...
Tue, 10 Jun, 2025 at 10:19 PM
I can not use the sensors to esx install DepNet.com for several of netframework 4 as previously said to use but could not implement them yet because I keep asking for the installation of net framework when I have it installed on your comput...
Tue, 10 Jun, 2025 at 10:19 PM
Hi,
This ins't a problem as such, more of an observation. I have three active DNS servers on my network; two live and one which is soon to be decommissioned.
While checking the DNS logs of the soon-to-be-decommissioned server, I not...
Tue, 10 Jun, 2025 at 10:19 PM
I would like to create 10 users in prtg and would like to change the "Homepage URL" to "/group.htm?id=0&tabid=1".
But I don't want to change the homepage one by one manually.
How can I change the "Homepa...
Tue, 10 Jun, 2025 at 10:19 PM
Hi there,
My question might be simple but i couldn't find any answer to it. Is it possible to search the SNMP String for more than one Keyword or do i need to use multiple sensors for that?
I need to check on a HWg-STE Temperature d...
Tue, 10 Jun, 2025 at 10:19 PM
Say I want to monitor 2 links using netflow on a device, Ethernet4/26 and Ethernet7/17, what are their interface numbers? I'd like to use the filtering tools in the sensor settings.
Assuming I can't use SNMP to retrieve the interf...
Tue, 10 Jun, 2025 at 10:19 PM
Hi Team,
I have PRTG 15 running in my office, and we added Arista switches, enabled SNMP with a community string, and we are able to detect the Cisco switch, but not the Arista switches using auto discovery.
If auto doesnt work, how do...
Tue, 10 Jun, 2025 at 10:19 PM
Hi
I wanted to set up a File Content Sensor for a ".txt" file. For tests I wrote only "DisplayName" inside the ".txt" file. Now if i search for "DisplayName", prtg allways says "String 'Dis...
Tue, 10 Jun, 2025 at 10:19 PM
Several times a day some WMI sensor for a specific system reports the following message "80010108: The object invoked has disconnected from its clients"
I use WMI-Arbeitspeicher, WMI -Uptime, WMI-Diskspace.
The system I monito...
Tue, 10 Jun, 2025 at 10:19 PM
We are trying to monitor the RemoteQueueLength in WMI for IIS6 SMTP on Windows Server 2012R2. PRTG returns the following from running a batch file calling the 64bit version of Powershell. We did try just running it under the native 32bit ...
Tue, 10 Jun, 2025 at 10:19 PM
800700A4: No more threads can be created in the system- Note: the OS version of the device could not
I keep getting the below error:
800700A4: No more threads can be created in the system- Note: the OS version of the device could not be determined, WMI might not work reliably.
Could anyone please assist?
Article Comments
...
Tue, 10 Jun, 2025 at 10:19 PM
I have written a script with separate channels using XML that works fine but have two questions/issues.
1. The data return is a percentage but no matter what channel settings I try, I cannot get the dials to show anything but all the way ...
Tue, 10 Jun, 2025 at 10:19 PM
Hi,
I am trying to install PRTG traffic grapher in my windows server 2003 service pack 2, using my routers WAN IP also tried with LAN IP, configured snmp string, SNMP port 161, but still getting connection refused kindly revert on this
...
Tue, 10 Jun, 2025 at 10:19 PM
Hello
We have an Exchange Server but this server doesn't get directly mails. - For receiving we use "popcon".
So normally our mails go to an external provider and our popcon asks this server and if there are any mails so ...
Tue, 10 Jun, 2025 at 10:19 PM
Hello,
We have multiple Netflow v9 sensors running among several remote probes. We're facing performance issues related to toplists.
Because of that, I'd like to edit the toplists settings like the retention time, the toplist count...
Tue, 10 Jun, 2025 at 10:19 PM
Hi,
I want create a custom sensor with a powershell command.
Get-RDUserSession -ConnectionBroker sevrer.domain.local
result
CollectionName DomainName UserName HostServer
-------------- ---------- ...
Tue, 10 Jun, 2025 at 10:19 PM
Could we have an additional view with a different hierarchy for devices.
For example. The main device hierarchy follows the location of the devices. Hence the devices are arranged into region, country and location groups. The dependency and...
Tue, 10 Jun, 2025 at 10:19 PM
We are monitoring several backup services within one mailbox. All of the backup services send emails to one email account. We followed the instructions given for the previous question
https://helpdesk.paessler.com/en/support/solutions/a...
Tue, 10 Jun, 2025 at 10:19 PM
Working with Extreme Black Diamond 8800 systems, I've downloaded, split and imported the mibs with the info I'm looking for (CPU utilization, system memory, free memory, user memory etc).
I've added the SNMP library and the se...
Tue, 10 Jun, 2025 at 10:19 PM
i want to simplify my notifications in order to receive them in this format :
[System Name] [Sensor Name] [Status] [Critical Value]
Actually i'm a beginner with PRTG and i want to personnalize it.
Article Comments
Dear k...
Tue, 10 Jun, 2025 at 10:19 PM
Hi,
We've just moved to PRTG v16 from an older version and it looks like we've lost the ability to customise the email notification content.
Does anyone know how to edit the default mail template?
Thanks,
David.
Articl...
Tue, 10 Jun, 2025 at 10:19 PM
I using the custom table beta amd I can view everything except a string which is referenced in the setup guide for the customer table snmp sensor. The reference suggests you cannot get string values as it will mark the sensor as down.
If I...
Tue, 10 Jun, 2025 at 10:18 PM
I've seen a couple of dated posts regarding this however, nothing has a definitive answer other than "this is not possible" however, those posts have been from a couple of years ago.
I've created some custom libraries to...
Tue, 10 Jun, 2025 at 10:18 PM
Hi everyone.
So there I was, starting to use PRTG for more and more, and getting really excited about the product. Then I decided to set it up to monitor SSL and domain expiry - and discovered that unfortunately when you try and use a tar...
Tue, 10 Jun, 2025 at 10:18 PM
Hi
We are trying to monitor a EMC Vnxe 3200 using PRTG.
Since the vnxe doen't have any SNMP Pooling, we can not monitor it in real time. We found a scritp using by Nagios to monitor it using CLI commands.
https://exchange.nagios...
Tue, 10 Jun, 2025 at 10:18 PM
I created a PowerShell script which checks the Windows Backup EventLogs for errors. The script is signed and it works when i run it manually from a different machine. For whatever reason, PRTG always returns the value 1, but it should retur...
Tue, 10 Jun, 2025 at 10:18 PM
I have a vb script to check the log file update for every minute and it works perfectly in my local machine.
Now I am using this script to monitor the log file in one of my server.
I have created a device with the server name(XXX) and add...
Tue, 10 Jun, 2025 at 10:18 PM
PRTG Network Monitor - Dashboards with actions (TELNET-SSH)
Actions (TELNET-SSH) can also be added in RTG Network Monitor dashboards, customizing map objects for each protocol.
The function (Telnet, SSH) in PRTG can facilitate the work ...
Tue, 10 Jun, 2025 at 10:18 PM
Are there any examples of the Custom SSH Advanced scripts generating XML output? I'd like to see a functional script that is working. My objective is to collect inventory data through PRTG and I'd like to have the sensors reports st...
Tue, 10 Jun, 2025 at 10:18 PM
Hello,
How to add "Used space, GB" channel in disk space sensor?
Article Comments
Hello,
we appreciate your inquiry.
This is not possible, the sensors focus in measuring the "Free Space" because that i...
Tue, 10 Jun, 2025 at 10:18 PM
