kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Can the cipher list the PRTG webserver uses be changed or reordered? If so, where can this change be made?
Article Comments
Tue, 10 Jun, 2025 at 8:46 PM
Is it possible to export your PRTG to a file format that you can import in another PRTG?
In the export we want all of the data for a full working PRTG.
Or do you advice something else for copying our PRTG?
I thank you for your help
...
Tue, 10 Jun, 2025 at 8:46 PM
I would like to know if you have the possibility of obtaining particular information by extraction, I explain.
On my servers, I use the Windows Free Space sensor which lists the partitions to know what remains in free space and to which I a...
Tue, 10 Jun, 2025 at 8:45 PM
Can anybody tell me how to call PRTG API in .NET c# application?
Article Comments
You can use WebRequest or WebClient to send a request to PRTG through HTTP
Aug, 2017 - Permalink
For reference, you can also use PrtgAPI, ...
Tue, 10 Jun, 2025 at 8:45 PM
Hi, I would like to know which sensors are recommended and which ones can be used to monitor a PaloAlto firewall.
I hope the answer in advance thank you very much
Article Comments
Hello,
Thank you for your KB-Post. I'm ver...
Tue, 10 Jun, 2025 at 8:45 PM
Hello,
i'm using a table on my maps as of the beginning of our PRTG installation. Scaling was working properly since then.
But now the mapobject scales itself down to the minimum size. it should have the width and height of the red fr...
Tue, 10 Jun, 2025 at 8:45 PM
Hello,
I can't completely figure out how to configure SNMP traps on PRTG and have a few questions. I get the traps into PRTG (from a Cisco 2960X switch), however:
1. The OID is shown and not the human readable text. The OID in ques...
Tue, 10 Jun, 2025 at 8:45 PM
How can I monitor my Cobham Seatel Antenna (VSAT and/or TVRO) to retrieve error states and log states like antenna positioning and heading?
Article Comments
Hello there,
Depending on which particular model you have there, it m...
Tue, 10 Jun, 2025 at 8:45 PM
Hi,
I would like to know if it is possible to connect several access points to a switch so that if the switch is down that there is no alert for the access point.
Thank you
Article Comments
You'll need to configure the Pin...
Tue, 10 Jun, 2025 at 8:45 PM
Hi Support,
I have PRTG monitor installed on one server and probe on remoter server. I have added remote server in device list and in that device I have added custom sensor(EXE/Script) for monitoring log file which exists on that remote...
Tue, 10 Jun, 2025 at 8:45 PM
We have 2 internet providers, 1 main and 1 fail overs if main goes out.
currently we dont have a automatic fail over
i would like to be able possible ping to an external I.P through the main network and if it fails going through the main in...
Tue, 10 Jun, 2025 at 8:45 PM
Dear Support Team,
I want to monitor a parameter from a DWDM device ,the parameter is "TransTxpower". the value which i want to graph has the unit of "dBm" , like 1.7dBm .
to achieve such a value i attempt to create a Cu...
Tue, 10 Jun, 2025 at 8:45 PM
Hello,
PRTG Manual say : "When using the auto-discovery function, the Ping Sensor on a device is by default set as the master object for this device. This means that monitoring for the entire device is paused if the Ping sensor is in...
Tue, 10 Jun, 2025 at 8:45 PM
It seems that in one of the recent releases (within the past 2 years), that pausing a sensor no longer frees up the license for that sensor. In the past, we use to pause sensors of ports, or perhaps entire devices, to keep for historical pu...
Tue, 10 Jun, 2025 at 8:45 PM
Hello,
I had a sensor to monitor the status of my ipsec VPNs.
I have 3 VPNs, 2 are UP and 1 is Down (normal status), but my 3 VPNs status are OK (green).
When I check the VPN status of my "down" VPN, the value is down, so the va...
Tue, 10 Jun, 2025 at 8:45 PM
Hi
I am using multiple top 10 mapobjects on my map to get a quick overview who's consuming the most cpu ressources, bandwith, etc.. However, since the update to the current version, theres a horizontal bar to scroll though the next 10...
Tue, 10 Jun, 2025 at 8:45 PM
Is is possible to reduce the font size of the "Sensor Message only on Status Related Background"? We are using a big monitor and a map solution 1920x1080 and like to show a lot of devices in our network. So we like to reduce the f...
Tue, 10 Jun, 2025 at 8:45 PM
Hi Team,
Is it possible to change the error status to error only instead of down status when threshold value is above the error limits for a selected sensors in the PRTG Tool.
Article Comments
Hello there,
When setting a li...
Tue, 10 Jun, 2025 at 8:45 PM
Hello PRTG-Team,
which advantages or disadvantages do we have from using remote probes ?
At the moment we have a cluster with 2 nodes (primary + failover) and several remote probes for monitoring other locations.
We're thinking abou...
Tue, 10 Jun, 2025 at 8:45 PM
I created a custom sensor. When there is an error it returns this:
2:Error Description
I see the 2 and the description on PRTG however the sensor still is green and has a check OK. What am I missing?.
Article Comments
Hi Mar...
Tue, 10 Jun, 2025 at 8:45 PM
The Netflow data the Palo Alto PA-220 firewall is sending displays registered (external) IP addresses for internal computer Internet traffic.
How can I configure the Netflow probe to use whichever templates will provide us with the LAN I...
Tue, 10 Jun, 2025 at 8:45 PM
Hello,
is there a chance to get a compact summary about inherited notifications from all sensors ?
Something like sensor x has the same configuration for notifications like the devide/sensor "above" ?
Sensor y has an own nofitic...
Tue, 10 Jun, 2025 at 8:45 PM
How to import cisco switch list into new devices under tree. I have over 35 ip's for switches how to add to device tree all at once? Thanks,
KP
Article Comments
Hello there,
We appreciate your contact.
You can ad...
Tue, 10 Jun, 2025 at 8:44 PM
I've scheduled a autodiscovery daily to run on network devices, and every day i have to remove sensor e.g
SSL Certificate Sensor (Port 443), is it possible to avoid some sensor to be autodiscovered?
Article Comments
Hi jmag...
Tue, 10 Jun, 2025 at 8:44 PM
Hi guys,
We have an EMC VNX 5200 that it should be monitored by PRTG.
I'm new in PRTG, I found some links but didn't suitable, please give me the best solution to monitor EMC such as disks and LUNs etc.
links that I've tested:...
Tue, 10 Jun, 2025 at 8:44 PM
Digging into PRTG and using the maps feature for some time now, there seems to be some recurring themes in the requests in the KB. One of them being font sizes for elements and the other being selection of channels from a sensor being place...
Tue, 10 Jun, 2025 at 8:44 PM
We are having an issue where random machines send a numerous data from one site to another on a specific port. We can defiantly identify those machines based on the traffic volume within an hour period using the sFlow sensor. The problem i...
Tue, 10 Jun, 2025 at 8:44 PM
Hi,
First attempt at getting a custom sensor setup. I have a device in PRTG that i currently monitor for ping. Occasionally the Ping will go into a Down state, when it returns to the Up state i want to run a script i have written.
How d...
Tue, 10 Jun, 2025 at 8:44 PM
My scenario: I have a main site using PRTG Network Monitor XL1 that is completely up and running. I have a remote site that installed PRTG freeware, this is also up and running. Both sites are connected using site to site VPN tunnel with...
Tue, 10 Jun, 2025 at 8:44 PM
Does Paessler have any plans to implement SNMPv3 INFORMS in to PRTG? I am attempting to monitor two Tintri devices and this is the protocol they use.
Article Comments
Hello there,
As of right now there are currently no plans r...
Tue, 10 Jun, 2025 at 8:44 PM
I am monitoring Clearswift (SEG). In the applicance, you can try with a "test trap", after a few hours I got it working. I'm trying now to generate an error with this "test trap". I added the "sensor trap receiv...
Tue, 10 Jun, 2025 at 8:44 PM
Hello guys,
i want to monitor the age of files with a specific extension.
Inside "folder01" is a file named "file01.bla" and a file named "file02.fuu". I only want to monitor the age of "file01.bla&quo...
Tue, 10 Jun, 2025 at 8:44 PM
Hello,
I need to define specific maintenance windows in advance for a specific time-frame. The schedule functionality is insufficient for that. When you could provide this very meaningful feature?
Best regards,
Markus
Article Co...
Tue, 10 Jun, 2025 at 8:44 PM
I would like to create a custom gauge mapobject that would display the name of the device along with the the probe type and status, what is the variable for the device (server) name and where do I add it in the object script?
Regards.
...
Tue, 10 Jun, 2025 at 8:44 PM
We wish to monitor our Cisco router with netflow v9. The current active flow timeout for devices are 30mins. If PRTG will only display the statistic upon 30mins, it will be too long as we wish to monitor real time top talker by 10mins exam...
Tue, 10 Jun, 2025 at 8:44 PM
I have one DNS sensor that is always "down". However, I can ping it by IP Address, Local domain name, and outside domain name. I have checked that the listed DNS name in PRTG is correct but still no change.
TIA,
Jeff
A...
Tue, 10 Jun, 2025 at 8:44 PM
I need a report of all my devices in prtg probe,
Article Comments
Hi there,
In order to retrieve the CSV file, simply connect to your PRTG webinterface via a webbrowser, login and change the URL accordingly:
http(s)://<...
Tue, 10 Jun, 2025 at 8:44 PM
I am trying to graph a Performance Monitor counter from our Hyper-V hosts that has multiple objects and I am getting the following error in PRTG:
XML: XML Parser mismatch: Wanted </>, got </prtg> -- JSON: The returned JSON doe...
Tue, 10 Jun, 2025 at 8:44 PM
After updating UCS Firmware to 3.1(3a), the Cisco UCS System Health sensor no longer show any values. Last Message: '' is not a valid integer value
What is causing this?
Article Comments
Hello there,
we appreciate yo...
Tue, 10 Jun, 2025 at 8:44 PM
Hi Paessler,
Could you please advise if it's possible to modify "Sensors With Status Down" table to show "Down For" data. (this column is shown in down acknowledge sensors table)
Currently "Sensors With Stat...
Tue, 10 Jun, 2025 at 8:44 PM
I have created a map that refreshes every 30 seconds. However, the objects on the map do not appear to refresh - the sunburst and other objects continue to show the state that the network was in when I opened the map.
The only thing that...
Tue, 10 Jun, 2025 at 8:44 PM
Hello
I'm trying the "Folder sensor". I want to make sure that a folder is empty. I cannot see a way to not count hiden files like Thumbs.db. At this point I cannot use the default sensor, it does not fit my needs. Why isn&#...
Tue, 10 Jun, 2025 at 8:44 PM
Hi PRTG,
I have developed an SQL Script I would like to execute using the Microsoft SQL v2 sensor.
I have placed the SQL script in the folder c:\program files (x86)\PRTG Network Monitor\Custom Sensors\sql\mssql on the PRTG folder, next ...
Tue, 10 Jun, 2025 at 8:44 PM
I am trying to use PRTG to monitor Delivery Optimization performance across the Windows 10 PCs on my LAN utlising the powershell cmdlets -
Get-DeliveryOptimizationPerfSnap
&
Get-DeliveryOptimizationStatus
Using a custom sensor (adv...
Tue, 10 Jun, 2025 at 8:44 PM
Hello everyone,
I have a question please answer me if you know. Is this possible to create new Bandwidth sensor which has value = Sensor A / Sensor B? I need to monitor ratio Between 2 Bandwidth sensor, if that ratio change ( for example : ...
Tue, 10 Jun, 2025 at 8:44 PM
Hi,
I have this message when I want to monitor a webpage, even if i specify an AD account that have rights. Could you please help me ?
Thanks
Simon RENAUD | CAPSULE
IT System Administrator
9b Villa Pierre Gi...
Tue, 10 Jun, 2025 at 8:44 PM
Hi,
On Device-Level (Settings, Windows Compatibility Options) it is possible to set timout for WMI.
Does this value apply to the timeout for the WMI request for System Information as well?
Where can I increase the timeout for the WMI re...
Tue, 10 Jun, 2025 at 8:44 PM
I want to monitor CPU Usage on my servers, but I do not want to monitor the cpu usage of a single process. Instead I want to monitor CPU usage as a whole. For example if my CPU usage gets to 60% I want to know I don't really care whats ...
Tue, 10 Jun, 2025 at 8:44 PM
Hi!!
At some point syslog gets down and then up. Why does this occur? How can we make sure this does not happen?
Tks
Erik Pinheiro
Article Comments
Hi there,
Can you please provide a screenshot of the Logs tab of the Syslo...
Tue, 10 Jun, 2025 at 8:44 PM
I want to raise an alert once the file size of C:\xyz\Copy of abc.xlsx on Server: xyzserver is less than 50KB.
Article Comments
Hello there,
You can do this with a File Sensor. The file needs to be on a network share on the re...
Tue, 10 Jun, 2025 at 8:44 PM
Hello
We would like rouse PRTG to show and store devices serial number , IP address , MAC address , what configuration on that device and licenses installed
The idea to use this report as centralized asset management and configuration...
Tue, 10 Jun, 2025 at 8:44 PM
Hello,
I am very new to PRTG and was wondering how to get wifi bandwidth reports for wireless network SSIDs? How can I view my wireless networks? I have 5 of them. Thanks,
Ken P.
Article Comments
Hello Ken,
We appreci...
Tue, 10 Jun, 2025 at 8:44 PM
We are starting to get sensors in error for Windows updates with the following error.
Could not retrieve update data. Please make sure your WSUS is configured correctly. (code: PE205)
The servers in question are all Windows 2012R2. We d...
Tue, 10 Jun, 2025 at 8:44 PM
Hi,
I would like to know if someone already use PRTG to survey Synchronisation status between two Solid Server (Efficient IP).
I tried to enter some OID in PRTG without success,
Thanks for help,
JJérôme
Article Comments
...
Tue, 10 Jun, 2025 at 8:43 PM
How can I refresh the PRTG page in the new web UI without clicking the browser refresh button and causing a full page reload? In the old UI there used to be a little button in the top right hand corner that I would use a lot. Can't se...
Tue, 10 Jun, 2025 at 8:43 PM
I installed 18.1 over my current 17.1 installation of PRTG. After then install and reboot i was asked to verify my licence. The server does not have internet access so I selected offline verification. After generating the activation file I ...
Tue, 10 Jun, 2025 at 8:43 PM
Hi,
I have connection scheme Cisco 6500 ---- Cisco 3925.
I collec data from 6500 (RSPAN tx) and 3925 (Netflow ingress).
Why Netflow values on 3925 differs from RSPAN 6500 and show interface command on 3925 (it`s same)?
Thanks.
A...
Tue, 10 Jun, 2025 at 8:43 PM
Hi Folks,
I created 2 templates and want to assign these template to the notification definitions.
In my example there is one detailed template for internal use and one rude template with basic information for external use.
is there any w...
Tue, 10 Jun, 2025 at 8:43 PM
I am trying to figure out how to get a count of the number of open sessions on our Oracle database. I have the sample Oracle SQL script running which grabs the up time, so I am at least able to connect to Oracle. But, trying to get the scri...
Tue, 10 Jun, 2025 at 8:43 PM
We are looking for a way to disable the "Down (Partial)" status.
It's causing false-positives and confusion for users, so our users start to ignore the status.
A sensor should go to "Down" when the master node sa...
Tue, 10 Jun, 2025 at 8:43 PM
We upgraded our monitor to version 16.3.25.6124+
In this version, the sensor HTTP SSL certificate expiration has been replaced by SSL certificate Sensor.
The HTTP SSL certificate expiration sensor worked fine without any problems.
But...
Tue, 10 Jun, 2025 at 8:43 PM
Hi PRTG.
I mirrored a core installation we have of PRTG onto a second host to even out the load however someone had made changes to the location data for a number of devices and groups putting them geographically in the right place rather...
Tue, 10 Jun, 2025 at 8:43 PM
Hello
Is anyone using SSH sensors like "Disk Free" on vCSA 6.5?
Looks like none of the ssh sensors are working...
I guess the problem is OS related as PRTG does not know VMware's Photon OS?
Sensor results:
{{{Result of...
Tue, 10 Jun, 2025 at 8:43 PM
I am attempting to set up some sensors for a Cisco UCS server to monitor its health and check for active faults. I have tried the built in SNMP Cisco UCS System Health sensor which does give accurate results. However we would like to be abl...
Tue, 10 Jun, 2025 at 8:43 PM
Das automatische Update konnte nicht richtig installiert werden. Es erschien weder eine Meldung noch einen Fehler. Die Dienste können jetzt auch nicht mehr neu gestartet werden. Auch manuell nicht
Connecting to: http://.........
failed.: ...
Tue, 10 Jun, 2025 at 8:43 PM
hello i am worknig on wisp company. we have radiolink antena .i want to see this devices on the real map.how can i do that
Article Comments
For each device, there is a Location field in the Settings tab.
You can populate this ...
Tue, 10 Jun, 2025 at 8:43 PM
I have previously had the push notifications configured and it was tested using the Siren sound using both Iphone and Android phones. Everything worked fine during the testing. No changes were made to the system except for updates to the ...
Tue, 10 Jun, 2025 at 8:43 PM
Hello, i need help
In the monitoring console add a device
In the properties of the device I add the administrator credentials of the Linux system
I add the sensor SSH Disk Free, in the settings I write disk partitions.
There is no channel i...
Tue, 10 Jun, 2025 at 8:43 PM
Hello,
I want to display DOWN Sensors table on a map in order the most recent on top to the older one. Actually it's the older on top.
I don't find how to.
Is possible to display the value of "down for" like Alarms sma...
Tue, 10 Jun, 2025 at 8:43 PM
As much as I love PRTG, I am disappointed with the SSL interface. With most other internal sites that I manage, it's as simple as generating a CSR within the application, applying it to the site certificate manager and uploading the .c...
Tue, 10 Jun, 2025 at 8:43 PM
Quite often when investigating an outage I have a need to select a particular point in time (say 2 days ago betwen 7 and 8pm) and would like to be able to quickly navigate around different devices & sensors to view what they were seeing...
Tue, 10 Jun, 2025 at 8:43 PM
I have a Fortigate 100D firewall and I am trying to monitor Bandwidth through PRTG. I am trying to use NetFlow V5 sensor but it is not populating any data. If I turn off PRTG services and use NetFlow tester it sees packets reaching my PRT...
Tue, 10 Jun, 2025 at 8:43 PM
This morning, I updated to the contemporary release of PRTG. This is something I do with fair regularity - the last installation would not have been more than a month or two old.
For the first time ever, the service has not restarted and...
Tue, 10 Jun, 2025 at 8:43 PM
I don't have the Setup>PRTG API under my menu. What needs to be set to enable this?
Article Comments
If you just hover over the "Setup" menu entry, a dropdown will appear and the API is shown - or is it? :)
...
Tue, 10 Jun, 2025 at 8:43 PM
Hi.
When I open PRTG console, it shows an error which is "Monitoring may be incomplete or inaccurate because one or more parts of PRTG are not working properly!".
Then I've checked service menu.
PRTG Core Server Service is ...
Tue, 10 Jun, 2025 at 8:43 PM
Hello there,
I wonder if the new and shiny REST Custom BETA can be used to keep track of bitcoin prices (or other stocks). Does anybody have a working example?
Best Regards,
Article Comments
This article applies to PRTG ...
Tue, 10 Jun, 2025 at 8:43 PM
Hello,
the PythonMiniProbe dont work on Ubuntu 16.04?
The Probe dont connect to the PRTG Core Server.
Greetings
Geist202
Article Comments
Hi Geist,
Did you already check if all https://helpdesk.paessler.com/en/support/so...
Tue, 10 Jun, 2025 at 8:43 PM
Hi,
Can i monitoring Hardware status for iLo & Storage Controller? (It's normal or degraded, if degraded, what's disk number
degraded)
I want to monitor it instead come into iLo management or storage controller.
Thanks s...
Tue, 10 Jun, 2025 at 8:43 PM
Dear all,
I use this script in GFI Network Monitor - but it didn't work at PRTG. Many thank's for your help.
Patrick
' /////////////////////////////////////////////////////////////////////////////
'
' ServerSer...
Tue, 10 Jun, 2025 at 8:43 PM
I have created a map with two graphs of live bandwidth usage. These have a white background. We recently changed PRTG to the dark theme. The background of these graphs stay white. Is it possible to invert them somehow?
Article Comme...
Tue, 10 Jun, 2025 at 8:43 PM
We have just updated to the new UI. Overall it is good, aside from one problem we're having with the font colour on the grid device tree view.
The font colour is white, and this is difficult to read on all but 'down' devices (...
Tue, 10 Jun, 2025 at 8:43 PM
Hi,
I have a question regarding PRTG Network Monitor.
I have two networks which are not connected together, and I would like to see data from the one network in the core installation of PRTG (which is located in a different network). Is...
Tue, 10 Jun, 2025 at 8:43 PM
I know it is possible to monitor certain processes via WMI and the "WMI Process" sensor, but I want to monitor a process with a dynamic name. For example the process "MyProgram123.exe" changes every week its name to &quo...
Tue, 10 Jun, 2025 at 8:43 PM
I try to use the pre-configured Clickatell setting of PRTG to send out SMS text messages to US mobile numbers.
When sending "Test" notifications, the PRTG Logs show an "OK" entry, but I do not receive any messages on ...
Tue, 10 Jun, 2025 at 8:42 PM
Hi,
I cannot manage to get an HTTP sensor for our intranet working.
URL: http://intranet/
Method: GET
LOGIN: administrator
PW: **
The sensor keeps saying: HTTP/1.1 401 Authorization Required
Can anyone help me here?
Best,
Sascha ...
Tue, 10 Jun, 2025 at 8:42 PM
Are there any plans to all multiple cores be managed via 1 web gui. I know that there is the client, but more of the traditional web page view.
Thanks,
Article Comments
Hello there,
Thanks for your inquiry, we appreciate ...
Tue, 10 Jun, 2025 at 8:42 PM
Hi
I had many sensors for our Exchange servers but they suddenly in error. I simply removed them few weeks ago. When I try to add a new sensor (on an Exchange server...), it is written
Sensor Settings
"No Hub-Transport or Edge-Ser...
Tue, 10 Jun, 2025 at 8:42 PM
I'm familiar with using the HTML Before/After functionality to insert content before and after an icon. However, what I am trying to do is change the how the text displays for the icon itself. For example, using a device status icon I w...
Tue, 10 Jun, 2025 at 8:42 PM
Is it possible to run auto discovery on a network segment and use multiple SNMP credentials? For example, our network printers use different SNMP credentials than our Cisco network equipment.
Right now I run autodiscovery with one set of ...
Tue, 10 Jun, 2025 at 8:42 PM
Hello everyone
I would like to deploy my own template to a device, but without an auto-discovery which add sensor. I do not want PRTG to add sensor to the device. If I understood the only way to apply template is by using it with auto-dis...
Tue, 10 Jun, 2025 at 8:42 PM
Hi guys, we are trying to monitor a Sophos UTM and after following the instructions the template is visible however PRTG cannot find any sensors to add.
Article Comments
Hello Warren,
Just to check, did you already see this kb...
Tue, 10 Jun, 2025 at 8:42 PM
Hello, I have a project that was assigned to me and a co-worker to set up AIX monitoring of hardware with PRTG. I'm not even sure this is possible, and I don't even know what AIX is outside of it being an IBM... thing. Does anyone h...
Tue, 10 Jun, 2025 at 8:42 PM
I am trying to setup SNTP monitoring on our network and all is going good but on our ASA 5505 and 5525X firewalls and the ASAs are synced to a time server. Is it possible to monitor Sntp/Ntp on a ASA?
Thank you,
Ron Carter
Artic...
Tue, 10 Jun, 2025 at 8:42 PM
Hi,
I start to use PRTG with custom mib library files. I added new sensor and started to get values. Everything is ok at that time, so I've changed setting for the values coming from that sensor (divide by 10, so for example I get val...
Tue, 10 Jun, 2025 at 8:42 PM
Hello,
Wanted to ask if anyone know how to configure a router, to open the port as per PRTG (Listen on port 514) for syslog receiver on a cisco router 876.
PRTG sees the simple Ping status Up/Down of the device, and also syslog receiver ...
Tue, 10 Jun, 2025 at 8:42 PM
Hi,
I search desperatly to look on a graph how to replace the percentage of reachable/unreachable of the ping by simply OK or NOT OK. As you cas see :
I would like this same graphic but no in percentage, just reachable/unreachable, is ...
Tue, 10 Jun, 2025 at 8:42 PM
I've seen this question asked here before, although the resolutions have not worked out for me.
I've connected our PRTG installation to Active Directory under Core & Probes settings. All goes through smoothly with the PRTG Ser...
Tue, 10 Jun, 2025 at 8:42 PM
We added an SNMP Custom String to pull the serial number of a device. If we search for this serial number in PRTG nothing is displayed in the results. How can we search for this result data?
Article Comments
Hello willieb,
Tha...
Tue, 10 Jun, 2025 at 8:42 PM
Hi, I'm trying to get a report on SNMP Traffic sensors. I understand that to build the report (average traffic, max traffic, etc) PRTG takes the values of the "primary channel" (Traffic In, for example).
Now, is there a way to...
Tue, 10 Jun, 2025 at 8:42 PM
Is there anyway that I can monitor the usage of my PRTG instance? I use it for monitoring different sites and I would like to know how much people at the different sites are using PRTG, either by tcp connections or how many times they log i...
Tue, 10 Jun, 2025 at 8:42 PM
