kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
i want to do an overhaul in my network and i need to have all error codes with their equal meanings.
i could find PE errors at your website whereas i coulnt find the others.
could you please help me with my aims?
Article Comments
...
Tue, 10 Jun, 2025 at 3:20 PM
Dear, how can I get data from a sensor and export via api? the way I'm doing is giving me a wrong value example of the message
This XML file does not appear to have any style information associated with it. The document tree is shown ...
Tue, 10 Jun, 2025 at 3:20 PM
Hello.
When i arrive to my office every day in the mourning i would like to have a report with all alerts that our company have in the night.
This is because we may have lost connectivity with another site for instance 1h and i would l...
Tue, 10 Jun, 2025 at 3:20 PM
Specifically, I'd like to add the last edited date to each map in a consistent format, and possibly the map name
Article Comments
Hello,
Thank you for your message.
I`m afraid that PRTG doesn't have native objects fo...
Tue, 10 Jun, 2025 at 3:20 PM
Hi all,
I've seen various post about this, but has not the outcome i'm looking for.
My problem:
Ive a VM for the PRTG remote probe, but this server also runs other apps. Wich uses WinCap/Npcap wich is already installed.
So dur...
Tue, 10 Jun, 2025 at 3:20 PM
I can create a notification trigger based on volume with a minimum time of 1 hour. I need to reduce that time from 1 hour to 5 minutes or maybe 1 minute. I am currently running on version 20.4.63.1427+
Article Comments
Hello W...
Tue, 10 Jun, 2025 at 3:20 PM
hi there,
is there any way to change the default colors of the channels in graphs so that then it the color of channels in the new sensors be according to new colors,
best regard and thanks
Article Comments
Hi there,
please ta...
Tue, 10 Jun, 2025 at 3:20 PM
I have a couple thousand ping sensors, and I did not realize that I had to set the Master Sensor setting before creating a template. I tried selecting all the ping sensors to make the change, but the option to select the Master Sensor is no...
Tue, 10 Jun, 2025 at 3:20 PM
We really need a incident report. This would be a report to run daily which summaries events by status which I can do in a map. I find it interesting that PRTG Reporting is so utterly useless. You can really delete Reports as it is today...
Tue, 10 Jun, 2025 at 3:20 PM
I have successfully added a Demo sensor using the Demo Batch file provide in the PRTG Windows installation.
C:\Program Files (x86)\PRTG Network Monitor\Custom Sensors\EXEXML\Demo Batchfile - Returns static values in four channels.bat
I&...
Tue, 10 Jun, 2025 at 3:20 PM
How to change PRTG email alerts subject, that due to long, its weird..
Current subject as " [%sitename] %device %name %status %down"
and email subject like as [PRTG-MTSECUTIL01] STFW01 SonicWall CPU Health (SNMP SonicWall Syst...
Tue, 10 Jun, 2025 at 3:20 PM
Hello,
I'm saving the syslog messages of a device with a sensor Syslog Receiver. I can apply some regular stores data in order to implement the alarms expression. Example: Receiver syslog message = 1622.
Regular expression for the statu...
Tue, 10 Jun, 2025 at 3:20 PM
We have some crummy vendor provided applications that instead of running as a service require an actual application to be logged in on a server. Thus there is no service available to monitor. How can I set up a sensor to monitor when an ap...
Tue, 10 Jun, 2025 at 3:20 PM
Sensor RDP
Cannot assign requested address Socket Error # 10049 Cannot assign requested address. (socket error # 10049)
Windows Server 2012
Remote desktop enabled
Remote Management enabled
PRTG
Article Comments
Hello there,
...
Tue, 10 Jun, 2025 at 3:20 PM
We have a number of Windows update sensors and two have been misbehaving a little while, but only recently started giving a "useful" error message saying the following:
XML: The returned XML does not match the expected schema. (co...
Tue, 10 Jun, 2025 at 3:20 PM
Customer request to view the aged file count details from the folder sensor alert. Is that any option available in oldest file channel at present it shows only the day and hr only. so, please help us to reply my query.
Article Comme...
Tue, 10 Jun, 2025 at 3:20 PM
Hi,
We do have a customer with alot of sensors. Under the customers remote probe there is a group with sensors, that only the customers are reacting on.
Is it possible to hide those sensors (when error) so that they will not show up in ...
Tue, 10 Jun, 2025 at 3:20 PM
Can I export all my sensors to Excel, then edit them and import them again to overwrite the sensors?
Article Comments
Hello,
Thank you for your message.
Can you please describe what you would like to achieve exactly ?
To exp...
Tue, 10 Jun, 2025 at 3:20 PM
I Created a custom schedule. It includes 5 working day and 12 working hours.
I run a report using this schedule.
When I choose only 5 days, I get for example, average traffic of 90Mbit/s.
When I choose the same 5 days + the weekend, the ave...
Tue, 10 Jun, 2025 at 3:20 PM
I am trying to use slack notification in PRTG.
For security reasons, only necessary URLs and IP addresses should be opened.
What URL or API do PRTG use when requesting slack?
Please tell me the URLs that needs to be open.
Thanks.
...
Tue, 10 Jun, 2025 at 3:20 PM
Dear Sir,
I have configured the PRTG to send notification (Email) by "When sensor state is down for at least 600 second perform Email to ....."
All sensors that are going to Down, I'm receiving email. It is OK.
but I want ...
Tue, 10 Jun, 2025 at 3:20 PM
Hallo,
Zu einer redundant angebundenen Colocation möchte ich die Verfügbarkeit der Leitungen monitoren. Es gibt eine Primärverbindung (MPLS) und eine Sekundärverbindung (IPsec).
Mein Problem, an das ich stoße ist, dass sowohl für die Ü...
Tue, 10 Jun, 2025 at 3:20 PM
The Windows Updates Status returns error "Couldn't retrieve OS information. Resultset was empty"
Core is running 18.1.37.13946+ and has powershell 4.x installed
Target is running Server 2012 R2 and has powershell 4.x insta...
Tue, 10 Jun, 2025 at 3:20 PM
When will the beta of the docker sensor be finished and be available as a "normal" sensor?
Article Comments
Hello Johannes,
Thank you for your message.
The Docker sensor will be deprecated and replaced by a new one...
Tue, 10 Jun, 2025 at 3:20 PM
I have installed a PRTG server with a probe for my company, but I can't figure it out. The PRTG does not read my 3 servers and the rest of the 4 does. While they are all networked and members of domain. They are Windows Server machines ...
Tue, 10 Jun, 2025 at 3:20 PM
So I can use the SQL v2 sensor to run a query and get results.
But how can I take those results and display them.
For example, query would give 4 columns of date like so:
CustomerDB,DBSize,UserCount,Sizeperuser
Cust1db,300,6,50
Cust2db,...
Tue, 10 Jun, 2025 at 3:20 PM
Hi,
I followed this reply to import the ssl certificate https://https://helpdesk.paessler.com/en/support/solutions/articles/76000045249#reply-673
but I get the error in the object
I read this question https://helpdesk.paessler.com/en/suppor...
Tue, 10 Jun, 2025 at 3:20 PM
Hi All
I won't to make threshold notification between two number
or define limit warnings that warning are in two numbers (0 to 50 is
green, 50 to 60 is red (Down) and 60 to 100 is green)
Can are doing this with PRTG?
Article Co...
Tue, 10 Jun, 2025 at 3:20 PM
I would like to set dependencies for multiple devices [and their sensors] to the ping sensor of the device. The said ping sensors are set under the device groups. Is there a way to add this for all the device groups at once, instead of indi...
Tue, 10 Jun, 2025 at 3:20 PM
I need to set up a sensor that shows green when an .exe is not running on a VM and then red when the .exe is launched.
Is there a good way to do this?
Article Comments
Hello Andy,
Thank you for your message.
I'm afrai...
Tue, 10 Jun, 2025 at 3:20 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to use certificate-based authentication...
Tue, 10 Jun, 2025 at 3:19 PM
I've written a custom python script to pull data from the Google Analytics Realtime Reporting API.
The existing PRTG sensor for Google Analytics leverages the Core API so this won't work in this case (I've tested).
It has been...
Tue, 10 Jun, 2025 at 3:19 PM
Hello there,
I was wondering if someone could help me out in regards to using a custom SSL certificate for my PRTG instance.
I currently run a NGINX Reverse SSL Proxy server on a Linux webserver (xx.xx.xx.10) and my PRTG on a Windows S...
Tue, 10 Jun, 2025 at 3:19 PM
Hi all
I want to create a probe that pings via SSH
example: SSH connection XXX.XXX.XXX.XXX id AAAA PW BBBB
ping address YYYY.YYYY.YYYY.YYYY.YYYY.YYYY.YYYY
I created a device to which I specified SSH parameters
and my probe inherits ...
Tue, 10 Jun, 2025 at 3:19 PM
Hello,
I want to get the list of all channels in my sensor or sensors, I used this API to get the List. But I didn't get the Channel Name and another information that belong to the channel.
https://localhost/api/table.xml?content=ch...
Tue, 10 Jun, 2025 at 3:19 PM
recently, i have tried to take a graph report in prtg.
although, it is expected that there has been just one graoh for each sensor, however, i receive 2 graphs for each one.
whats the problem?
Article Comments
Hello there,
do...
Tue, 10 Jun, 2025 at 3:19 PM
Hi all,
I am new to the PRTG setup, I will wish to have email notification send to us when sensor values change or status down.
I am using Direct delivery using built-in email server (default) with the sender to my own company email (Te...
Tue, 10 Jun, 2025 at 3:19 PM
cannot setup, error as below
The validation of the data you entered has failed.
The Active Directory domain is not accessible
The settings have not been changed. Error details
Version: 20.4.63.1427
Server: 127.0.0.1:4443
URL: /editsetti...
Tue, 10 Jun, 2025 at 3:19 PM
Hi,
I try to figure out is there a way to convert single snmp query response "00 4D 00 01 00" to five different channels in prtg?
Also would like to know is there way to convert hex to dec (4D => 77 which is temperature val...
Tue, 10 Jun, 2025 at 3:19 PM
I need to capture some metrics regarding the use of PRTG.
When an alert is triggered, can i generate a report telling me how long it was before it was acknowledged, paused or cleared?
I will like to run this report for all alerts say ove...
Tue, 10 Jun, 2025 at 3:19 PM
Hello,
When adding hyper-v host server sensor I get an error "Microsoft Windows Server 2019 Datacenter" does not support BytesPersec (Field). This host have another sensors (CPU, Memory, Diskspace) which work fine. Additionally ...
Tue, 10 Jun, 2025 at 3:19 PM
Hi Team,
I would like to download a monthly report that consist the following below for all the 100 devices that being monitored.
It should display items as below in a csv or xml file.
1. Downtime (Date & Time)
2. Uptime (Date...
Tue, 10 Jun, 2025 at 3:19 PM
In the infrastructure that monitoring exists a firewall that this blocking port UDP 161 and only allows tcp 161, exists the procedure to change my monitoring in PRTG over tcp 161? Its very important to have ready this monitoring for my clie...
Tue, 10 Jun, 2025 at 3:19 PM
Hi,
We have use the PRTG build-in sensor “SNMP CPU Load” to query the Paloalto firewall CPU load, and we get two value : processor 1 & processor 2.
Is it possible to know what is the snmp oid we query?
Best Regards,
Jackson Ku
...
Tue, 10 Jun, 2025 at 3:19 PM
Dear Support Team,
Hello,
Is there any way or solution for hiding paused sensors of a device?
Best Regards
Article Comments
Hi Hossein,
Thank you for your post. I'm afraid to tell you though, that it's not possible to ...
Tue, 10 Jun, 2025 at 3:19 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want an installable agent for Windows server...
Tue, 10 Jun, 2025 at 3:19 PM
Is it possible to request a functionality to be added to PRTG here? I learned through another inquiry that when using SNMP sensors and the SNMP Tester tool that PRTG does not support the use of hexadecimal number formats. Since I was trying...
Tue, 10 Jun, 2025 at 3:19 PM
Hello. In older versions I use shapes like half donut (semicircle) around a clock in PRTG map. In this version I can't find this kind of object. After replying I can send you an image to show what I need.
Article Comments
He...
Tue, 10 Jun, 2025 at 3:19 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want possibility to evaluate incoming sensor...
Tue, 10 Jun, 2025 at 3:19 PM
We have a number of servers that have maintenance windows configured. For a number of our servers, there are some sensors where we expect an error condition to persist for some time (at the moment, usually due to the closure of sites due t...
Tue, 10 Jun, 2025 at 3:19 PM
Is it possible to remove the unlimited acknowledgement from the selection list? It should only be possible to confirm at specific times.
Is this only possible for certain users?
Article Comments
Hello Michel,
Thank you for you...
Tue, 10 Jun, 2025 at 3:19 PM
Can someone please advise the best practice on setting up alerting based on limits. For example, what would be the most suitable set up for ping sensor for Access points? Whats the best bottom and upper limit?
Article Comments
H...
Tue, 10 Jun, 2025 at 3:19 PM
Core version: 18.2.41.1652
Hi, I see a few comments about how to do this on earlier versions but these seem to point towards a View option that does not appear to be within the current version. Is there a way you can hide all paused sens...
Tue, 10 Jun, 2025 at 3:19 PM
I am using C# to call the PRTG API. I get past authorization, but can't get past a "browser not supported" error message. I have tried a few settings, but haven't had any luck getting past it.
Any suggestions?
A...
Tue, 10 Jun, 2025 at 3:19 PM
L.S.
I have several HP printers, that are in power-save during out-of-office hours. This gave me error's, so I put these printers on a Week-day Eight-to-Five schedule. This work fine.
Looking at the "Pages Printed" graphs,...
Tue, 10 Jun, 2025 at 3:19 PM
I'm trying to monitor the event log on a clustered node for any changes in virtual machine location. I've found the correct location and event ID I want to be notified for but the log is not in the list of the Windows API Event Log...
Tue, 10 Jun, 2025 at 3:19 PM
hello everyone, I have a problem with my PRTG all my sensors are not giving although a few days ago all were working I have the error "WMI: Unable to establish connection (800706BA: The RPC server is not available - Host: 192.168.xx.xx...
Tue, 10 Jun, 2025 at 3:19 PM
I may be crazy but I thought Virtual Memory in Windows was the page file. The SNMP Memory Sensor can show physical and Virtual. The Virtual Memory seems to equate to same value as physical however I'm seeing almost 100% Virtual memory u...
Tue, 10 Jun, 2025 at 3:19 PM
Hello! :)
I am trying to find a way to monitor our 4 Raspberry info tvs.
On these machines is running raspberry pi and chromium with a url switch plugin.
So the raspberry shows all 30 seconds another URL.
On of these URLs is a grafana...
Tue, 10 Jun, 2025 at 3:19 PM
We have nearly 10,000 sensors running on our environment and would like to check that none of them have been set to monitor at a high frequency. Is there a simple way to check for this?
Article Comments
Hello Giles,
Thank you ...
Tue, 10 Jun, 2025 at 3:19 PM
hi Expert,
My system uptime sensor graph has shown low reading while that sensor doesn't down. This happens within 8hour and after that my graph back to normal back. I check the data table, within that time my sensor detected uptime ...
Tue, 10 Jun, 2025 at 3:19 PM
I have a problem with SNMP FUJITSU SYSTEM HEALTH V2 SENSOR.
The problem is an error occurs with the following message:"Access violoation at address00A7695E in module 'PRTG Probe.exe'. Read of address 00000015 in FujitsuiRMC s...
Tue, 10 Jun, 2025 at 3:19 PM
Is there somewhere a documentation where I can read about security of remote probe connections.
I (or my client) want to know how server can be sure that probe connection is valid (probe id, personalized certificate etc..), is it really SSL...
Tue, 10 Jun, 2025 at 3:19 PM
Hello PRTG Team,
we updated to vSphere version 7, with this version the DRS Score was introduced.
This score is pretty useful and we want to have it within PRTG.
We like to have the Cluster DRS Score within PRTG to see the "Happine...
Tue, 10 Jun, 2025 at 3:19 PM
Hi,
I would like to ask if there is a a sensor or a similar one that we can use for the RAID/disk array of a server, via iLO (HPE) or iDRAC (DELL). I have searched the available sensors, but the only ones are: individual Physical disk sen...
Tue, 10 Jun, 2025 at 3:19 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want the DRS Score from VMware vSphere as a ...
Tue, 10 Jun, 2025 at 3:19 PM
Hello!
I would like to ensure that the SNMP synology physical Disk sensor monitors for S.M.A.R.T drive status?
I want to be sure to know if a disk enter warning or failed state.
If not: how may i check for this values with SNMP?
...
Tue, 10 Jun, 2025 at 3:19 PM
Hello
in the log module we can apply a filter by date, which granularity is taken into account
We did a test by selecting minutes that did not seem to be taken into account
2020-11-24 16h16 to 2020-11-24 16h24
in the event of an alert, the ...
Tue, 10 Jun, 2025 at 3:19 PM
I have created a REST Custom Sensor to Monitor our VPN Tunnels on a Palo Alto Firewall.
We have over 50 Tunnels so my question.
Is it possible to just create the tunnels that startswith "at00" ?
Example from a Tunnel Name &qu...
Tue, 10 Jun, 2025 at 3:19 PM
Hi,
we would like to check logfiles on a Linux server for keywords (like error). Are there possibilities for this or has someone already written a script for this?
Thanks in advance.
With best regards,
Dennis Hartmann
Article Co...
Tue, 10 Jun, 2025 at 3:18 PM
Hello,
I am testing out the sniffer sensor and have it configured in the following way:
Configured port mirroring (spanning)
The server setup is a sVM on hyper V server with several nics. One nic is dedicated for PRTG management, ho...
Tue, 10 Jun, 2025 at 3:18 PM
Hello,
I always use most detailed settings for Graph Settings.
Now it is:
LiveGraph 16h/1min = 960 values
x3
Graph1 2d/1min = 2880 values
x30
Graph2 60d/1h = 1440 values
x12.5
Graph3 750d/1d = 750 values
for unknown reasons you are u...
Tue, 10 Jun, 2025 at 3:18 PM
Is it possible to allow more flexibility on the polling interval on the hosted version of PRTG like on the installed software variant? Currently the lowest polling frequency possible to configure on the hosted version is 60 seconds, but we ...
Tue, 10 Jun, 2025 at 3:18 PM
Guten Morgen,
folgendes Szenario:
Wir haben ein Logfile, in welchem eine Anwendung ihren derzeitigen Status schreibt.
In dem Logfile steht dann immer nur ein einziges Zeichen (0, 1, 2 od. 3).
Gibt es einen Sensor, mit welchem ich das ...
Tue, 10 Jun, 2025 at 3:18 PM
Is it possible to export a group of sensos from one PRTG instance and then import them into a dfferent PRTG instance?
We have 3500 sensors in a PRTG instance hosted by a 3rd party (they have multiple customers on their instance) and we ar...
Tue, 10 Jun, 2025 at 3:18 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want the PRTG Mobile App to read NFC-Tags.
...
Tue, 10 Jun, 2025 at 3:18 PM
Here is the script to get data from ookla. Script is running speedtest cli version and generates xml output with four channels as one sensor. You will get Download, Upload, ping and distance to server.
All you need is to get speedtest in...
Tue, 10 Jun, 2025 at 3:18 PM
We have Fortigate 101F firewall, but i don't see any options to discover this machine with a Fortigate Template.
Is there such a template??
I specificaly want to monitor the power status of the redundant power supply.
Kind Regards...
Tue, 10 Jun, 2025 at 3:18 PM
Hi team,
We have been getting this strange issue when trying to monitor a server 2016 machine on AWS, it is a Workgroup machine
We created user account called prtg and granted the following permissions:
administrators
Distributed COM...
Tue, 10 Jun, 2025 at 3:18 PM
Dear Colleagues,
Have 2 questions:
1. is that possible to setup "flows" of HTTP requests ? Meaning if we have API call (HTTP) that will give us session token,
can we use this (as variable) for next calls ? Or in general - can...
Tue, 10 Jun, 2025 at 3:18 PM
Hello!
I am trying to monitor the SFP temperature connected to a Huawei switch. I found the OID 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5 on this Huawei's site: https://support.huawei.com/enterprise/en/doc/EDOC1000178167/94ef2802/displaying-...
Tue, 10 Jun, 2025 at 3:18 PM
I would like to add sensors with Modbus registers greater than 9999, I have several applications where this would be necessary. Is this possible?
Also, if you could squeak in one more channel, six total, into a Modbus sensor, that would b...
Tue, 10 Jun, 2025 at 3:18 PM
Hello
I have configured IPMI on my HP server and tested that 623 TCP/UDP port be open between PRTG remote probe and the server's iLO port by capturing the traffic.
But when i want to create the IPMI sensor and after i enter the iLO us...
Tue, 10 Jun, 2025 at 3:18 PM
Is there a solid way to separate devices, either in groups or any other way, based on their DNS name?
Say I have devices named x.A.com and x.B.com in the same subnet, but would like to apply different templates to them and show them on diff...
Tue, 10 Jun, 2025 at 3:18 PM
Hi,
Need to find a solution to export to excel the PRTG listings of the warnings or alerts,
so it will be much more efficient to work .
Tried to find the needed option , but without any luck.
Thanks.
Article Comments
Dear G...
Tue, 10 Jun, 2025 at 3:18 PM
Is it possible to monitor the days to expiration for an internal self-signed SSL certificate ?
Article Comments
Hello,
Thank you for your post.
You should be able to monitor your certificate by using the SSL Certificate Sens...
Tue, 10 Jun, 2025 at 3:18 PM
I would like to receive a down message for the first sensor in a group that goes down and summarize the rest. But only within that group of devices, not for the entire tree. Is that at all possible?
Article Comments
Hello Michel...
Tue, 10 Jun, 2025 at 3:18 PM
Is it possible to order the channels appearing in a sensor ?
I want Channel 1 to be top of the stacked graph, then Channel2 then Channel3 etc...
Any idea?
thanks
Article Comments
Hi,
I'm afraid it is not possible to sor...
Tue, 10 Jun, 2025 at 3:18 PM
Is there a way to access the admin interface using AD integration with multiple domains?
domain1 has security group with members from domain2. Those members cannot login.
Article Comments
Hi there,
PRTG is not able to use f...
Tue, 10 Jun, 2025 at 3:18 PM
On my Probe Device the "Microsoft Network Adapter Multiplexor" has a red status.
It gives me the error shown below:
No data to return. (Performance Counter error 0x800007D5)
Article Comments
Hi,
Please check this...
Tue, 10 Jun, 2025 at 3:18 PM
How to convert value from lastvalue_raw to Mbps or kbps.
result from :
api/table.json?filter_type=snmptraffic&content=sensors&output=json&columns=objid,lastvalue&id=53696
{{{
"sensors": [
{
"objid": ...
Tue, 10 Jun, 2025 at 3:18 PM
I have a trap receiver (beta) set up and currently receiving traps.
How do I add the trap list (messages) in my map as an object?
Article Comments
this is not yet possible, sorry.
It is likely that this will be available in th...
Tue, 10 Jun, 2025 at 3:18 PM
Hi,
We have a lot of sensors running in our environment and i was wondering if it is possible that sensors discovered with auto-discovery are deleted automaticly when they are already removed. For example, if a vm is sensored in a vcenter...
Tue, 10 Jun, 2025 at 3:18 PM
hi, we have a prtg server, version: 20.4.63.1412 x64
I tried to change our dns name but it gives me this error
{{{
The validation of the data you entered has failed.
The web server port 443 is not available. Please stop or reconfigu...
Tue, 10 Jun, 2025 at 3:18 PM
This seems to happen each afternoon (possibly more often that than).
I get a warning from PRTG: 97 % (System CPU Load) is above the error limit of 90 % in System CPU Load.
How can I figure out what is causing this?
Article Comments ...
Tue, 10 Jun, 2025 at 3:18 PM
Hallo zusammen,
wir benutzen den Sensortyp Programm/Skript, dann als Programm ScheduledTask2XML.exe.
Folgende Parameter: -c=wswg0067 -t=Transfer-RIECOnnect
So lautet der Task auf dem PC. Jedoch kommt ein Fehler:
Der Dienst RemoteRegi...
Tue, 10 Jun, 2025 at 3:18 PM
Hello
I am going to add a website monitor using the XML path provide by the website provider.
The value I want to monitor is the network="1" in the XML below:
so, if network=1 then the website is UP, vice versa.
However, I a...
Tue, 10 Jun, 2025 at 3:18 PM
I am trying to develop a custom sensor using the advanced python script sensor. The script should list the folders and files of a subdirectory located at a network shared windows folder. The folder is mapped as a network drive in the prtg s...
Tue, 10 Jun, 2025 at 3:18 PM
Hi all,
I am new here, just trying to understand PRTG. I have 10y experience with nagios / centreon monitoring systems, so I am looking for the similar functionality also here.. Not sure if this is good way how to learn PRTG ;)
I under...
Tue, 10 Jun, 2025 at 3:18 PM
When editing error limits on QoS sensors we have noticed that the sensor stops working and displays "Time-out No Packets received code PE062" and then it says the sensor has not received data for X number of minutes.
But the sen...
Tue, 10 Jun, 2025 at 3:18 PM
