kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I have the following issue and i offer two possible solutions.
The issue i have is if i pause a device that has a sensor down on it i get an 'up' notification to say the sensor is no longer in a down state. When i un-pause the dev...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
We need to be able to pass AWS Keys defined at the device leve...
Tue, 10 Jun, 2025 at 4:24 PM
I need to get a report of Unicast In Traffic (speed) for all sensors during a specific time frame. I have this being recorded in the sensors but just can't figure out a good way to get an output that is usable for this.
Article ...
Tue, 10 Jun, 2025 at 4:24 PM
Is it possible to add a button or a link to a map so we can immediately open a certain folder on our local domain wich contains log files ?
We have this location were we store certain log files, would be usefull if we could click on the m...
Tue, 10 Jun, 2025 at 4:24 PM
in the historical data graphs there is one for 2 days and another for 60. this is by no means usable to me. How can I add 7,15,30 day tabs?
thanks
Article Comments
Hi there,
PRTG does not have an option create graphs for cust...
Tue, 10 Jun, 2025 at 4:24 PM
User Story
As a PRTG User, I want be able to add PIE CHART element to map to visualize ANY (!) sensor that has at least 2 dimensions (X - channel(s), Y - numeric value(s) of the same type).
Details of User Story
Ideally, ANY(!) sensor...
Tue, 10 Jun, 2025 at 4:24 PM
Hi,
I created a custom DNS sensor for SRV Queries.
I tried my query in PS and it worked, but when I put it in PRTG I have error about structural error in XML file, but I think that XML file is correct.
My code is
$Node = Resolve-DnsNa...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to add SRV query among options for DNS se...
Tue, 10 Jun, 2025 at 4:24 PM
There are now 7 options for acknowledging an alarm. (Indefinitely, 5min, 15min, 1hour, 3hours, 1day, until)
We only use 1hour, 3hours and until.
And in until it's always 12 hours further or until the next morning.
It would be great to...
Tue, 10 Jun, 2025 at 4:24 PM
Aren't the device icons supposed to show in PRTG Desktop, I only see some default icons.
This is what i looks like (The same view from PRTG Desktop, PRTG WebUI and PRTG Enterprise Console)
PRTG desktop:
https://i.imgur.com/7UQxO0q....
Tue, 10 Jun, 2025 at 4:24 PM
Hi,
I build a simple SSH script but is not executed and I get the time out error.
Here the script
"<prtg>"
New-SSHSession -ComputerName 172.20.3.1 -Credential $Credential -AcceptKey >$null
"<result>&...
Tue, 10 Jun, 2025 at 4:24 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
User Story
Currently, only a couple of the generic icons appear in the "PRTG Desktop" version. Showing the actual Device Icons (like the web interfa...
Tue, 10 Jun, 2025 at 4:24 PM
I would like to know where I can change the delimiter in use (currently the ,) when I export data via the API to CSV. the comma is causing and issue as some Description/Name fields have a comma in.
i would like it to change to a ;
Regar...
Tue, 10 Jun, 2025 at 4:23 PM
Hi,
I have a sever with a PRTG probe installed but want to check if a TCP port is open on another server in the same LAN. To clarify, I want to confirm network connectivity between the server running the probe and another server. The Port...
Tue, 10 Jun, 2025 at 4:23 PM
I need to see what sensor a traffic light is mapped to in the Map Designer.
But If I hover over it I can only delete / drop connections or send to back / front?
Unfortunately the person who set up the map has left the company.
Any ideas
...
Tue, 10 Jun, 2025 at 4:23 PM
In PRTG, a SNMP Library is set up for me to monitor CISCO device module operation status. Under the sensor overview, I get Channel ID 2 and Value OK, which is great.
My question is, it the Channel ID aligned with Value? for example, if t...
Tue, 10 Jun, 2025 at 4:23 PM
Hello,
one of our ssl secority sensors can not check the status of the revocation.
"Unable to check revocation status"
Use this query the proxy defined in the device settings?
I see no traffic at the proxy server.
I enabled ...
Tue, 10 Jun, 2025 at 4:23 PM
How can change the wmiuptimesensor to show hours or seconds instead days?
I've configured the wmiuptimesensor on my windows server but i don't find a way to show hours or seconds, that it's possible with this sensor? if have oth...
Tue, 10 Jun, 2025 at 4:23 PM
Hey.
I have already had a lot of correspondance with Atle Hadland th Regional Manager at Nordic departmen, we have tryid to figure somthing out becouse of our situation and in the end he told me to take it here.
the problem is that at t...
Tue, 10 Jun, 2025 at 4:23 PM
I used WMI multi disk sensors , but i would like to use snmp sensors.
When i use snmp sensors i show totality disk but not windows partition .
It's possible ?
Article Comments
The OID used for this is 1.3.6.1.2.1.25.2.3.1.3,...
Tue, 10 Jun, 2025 at 4:23 PM
Let us enable/disable footer with Mapdesigner instead of customizing css/javascript files that doesn't work.
Article Comments
Tue, 10 Jun, 2025 at 4:23 PM
We have a wall board that monitors Critical servers but i've notice that if I search for the device IP it is showing up twice in PRTG. One under a wall board device group and the other under a server device group?
Is this using two lice...
Tue, 10 Jun, 2025 at 4:23 PM
You should be able to set thresholds for alerts based on more than just a high and low value.
- Add value to check for change (positive or negative) in addition to high low values.
- More advanced, add a check for growth increment facto...
Tue, 10 Jun, 2025 at 4:23 PM
I am trying to connect to historic data via this URL, which contains my custom date range (last 30 days) and creds.
$prtgurl = "$PRTGHost/api/historicdata.csv?id=$SensorID&avg=3600&sdate=$StartDate2&edate=$EndDate2&$...
Tue, 10 Jun, 2025 at 4:23 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want a way to see the top nosiest sensors an...
Tue, 10 Jun, 2025 at 4:23 PM
Why not include Grafana in PRTG as an option?
Article Comments
Hi André,
We, that is, Dariusz (colleague of mine) had the same idea, and checked the plugin. Unfortunately, the code is rather complex and setting up a developmen...
Tue, 10 Jun, 2025 at 4:23 PM
I use some SQL sensors and when i want to display the count of the affected rows in a MAP there is always the #-sign behind the Value. Is it possible to change that sign or to leave it blank?
It takes a lot of space if you get many values
...
Tue, 10 Jun, 2025 at 4:23 PM
I tried to do it with ADO, but did not get an result. Is there any easy way to minitor Firebird DB's? Is there any Builtin Function. I have to monitor around 80 Firebird DB's and would aprecheate a easy to use Function.
I'm Us...
Tue, 10 Jun, 2025 at 4:23 PM
We have auditing set up across all our domain controllers, and they are being monitored by PRTG.
i want to be alerted when a user fails to log into their machine /server
Whats the best way to set this up?
Article Comments
Hi...
Tue, 10 Jun, 2025 at 4:23 PM
I need a help, I will attend a client in which the prtg Server is in another country, it is an installation with about 900 sensors, country of origin Germany, destination Brazil
How can I do this migration?
Article Comments
Hell...
Tue, 10 Jun, 2025 at 4:23 PM
How can I set up send sms nofication via API of sms provider (not on list service provider )?
Article Comments
Hello there,
In "Setup | System Administration | Notification Delivery" the dropdown for SMS providers co...
Tue, 10 Jun, 2025 at 4:23 PM
Right now it seems its possible to enable/disable unusual sensor detection either:
- Globally (for all of PRTG)
- On a device-by-device basis
Neither of these options work particularly well (at least for us - but I would have to imagine...
Tue, 10 Jun, 2025 at 4:23 PM
A couple months ago i had to replace a drive in my Disk Pool on my Synology NAS.
I montior this NAS via SNMP, and the disk that was a Hot Spare, rebuilt the pool, and I went over and swapped out the dead drive, and assigned it as the new ...
Tue, 10 Jun, 2025 at 4:23 PM
Hi,
I have a question regarding the VPN's.
Is it possible to send probes or ping from PRTG through a VPN tunnel so the tunnel stays open?
The problem we face is that the VPN's will terminate the connection when in idle making it d...
Tue, 10 Jun, 2025 at 4:23 PM
User Story
As a PRTG User, I have set up a PRTG cluster, but as you know there are some limitations in using specific sensors.
I'd like to monitor the NIC traffic on my cluster.
Acceptance criteria
Use of Traffic sensor in PRTG Cl...
Tue, 10 Jun, 2025 at 4:23 PM
Hello,
I need to monitor the hardware healthy for a switch HPE 5700
I can't use the mib for the HP Procuv.
Someone has a tip for monitoring the health of HPE switch ?
Best Regards
Article Comments
Hi Owin,
You could als...
Tue, 10 Jun, 2025 at 4:23 PM
I am currently using mpstat to monitor individual cores on a Linux server, but I would like to know how to monitor the cores in PRTG. As of right now, I can only monitor the total CPU usage.
Article Comments
Hello,
I'm af...
Tue, 10 Jun, 2025 at 4:23 PM
Hi guys,
I've tried to monitoring java on windows Server, follow the KB https://helpdesk.paessler.com/en/support/solutions/articles/76000065200-how-can-i-monitor-java-applications-via-jmx-with-a-prtg-mini-probe.
When i tried to per...
Tue, 10 Jun, 2025 at 4:23 PM
I have to indirectly monitor the proper operation of an URL filtering appliance.
It means that I cannot access its dashboard or log viewer.
The idea is to use
https://github.com/StevenBlack/hosts/raw/master/alternates/fakenews-gambling-...
Tue, 10 Jun, 2025 at 4:23 PM
Hi, I would like to monitor on esxi datastore (on logical drive, not on a specific virtual machine) IOPS READS /s, WRITES /s, MBREAD /s and MBWRTN /s given by command esxtop option U but I can't obtain that on predefined sensors. Is som...
Tue, 10 Jun, 2025 at 4:23 PM
What is the most effective way to monitor a clustered app or system composed of many components.
Say I have a system consisting of three clustered servers. Is there a way to receive a warning notification if one or 2 of the 3 server has ...
Tue, 10 Jun, 2025 at 4:23 PM
Hi, I'm trying to create a nagstamon-like script that displays the alarm data on prtg.
In the Rest API I found many useful columns, but I noticed that the "ip address" column is missing under the sensor branch and above all th...
Tue, 10 Jun, 2025 at 4:23 PM
I get this error when i am trying to add an SNMP HP ProLiant Physical Disk sensor for HP Proliant DL 385 G5 server.
Server OS : Windows 2012 R2
HPE Insight Management Agents ver. 10.60.0
HPE Insight Management WBEM Providers for Windows ver...
Tue, 10 Jun, 2025 at 4:23 PM
Hi
I have a remote probe installation in a second, separate windows domain. This domain has two networks, separated by a firewall, and remote probe is installed in one of those. I can add machines from second network without any issues, b...
Tue, 10 Jun, 2025 at 4:23 PM
We have some Omega iServers (http://www.omega.com/pptst/iTHX-W3.html) in our environment that we'd like to track statistics of three sensors, Temp., Humidity, Dewpoint.
The company has an Excel based logging solution, but we nor they ...
Tue, 10 Jun, 2025 at 4:23 PM
After kb4494440 was installed, our PRTG server CPU spiked to 100% and stayed there until we removed the update. Most of the CPU time was from MS SQL sensors (v2) and Powershell scripts running from PRTG sensors. Has anyone else has this iss...
Tue, 10 Jun, 2025 at 4:23 PM
I have a problem with a ESXi host, I see 180 warnings like this
Seems like somethings not right, and that one simple change might remove all warnings ;)
Warning - 180 elements return a warning state: Memory; Proc 2; Proc 1; Power Supply...
Tue, 10 Jun, 2025 at 4:23 PM
I have been trying out PRTG for a little bit now, and I think this product will be good for us, but we need to get MySQL sensors working to decide on if we purchase.
I need to monitor MySql slave status on a few different servers running ...
Tue, 10 Jun, 2025 at 4:23 PM
Good afternoon
How do I search the notifications registered for a specific group or ID?
Article Comments
When you open Setup | Account Settings | Notification Templates, you can select one via checkbox and click the small group...
Tue, 10 Jun, 2025 at 4:23 PM
We have PRTG Probe Server and most of time CPU usage hits to more than %90 thanks to that service. Is there any way restart to service automatically when CPU usage hit to %90?
Article Comments
Hello Erol,
Use the probe's ...
Tue, 10 Jun, 2025 at 4:23 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to have the Comments Field selectively ...
Tue, 10 Jun, 2025 at 4:23 PM
Currently we are researching in order to build a Conctact Center ( Amazon Connect ) integration with a PRTG server, we would like to be able to query alerts, down sensors, and uptime from a phone call to the contact center. I think that we ...
Tue, 10 Jun, 2025 at 4:23 PM
Hi All,
we Have device that confirmed doesnt have System Uptime OID, which is mandatory in SNMP RFC.
but we can monitored that device with another NMS.
Our opinion is because that another NMS have feature "Doesnt perform ping/snmp chec...
Tue, 10 Jun, 2025 at 4:23 PM
Hello,
for Clients that we only reach by Teamviewer it would be great to have a sensor which checks the availability (online, offline, etc.) of the corresponding ID.
I don't know if thats technically even possible but I think it wou...
Tue, 10 Jun, 2025 at 4:22 PM
If I delete a sensor for one device, does it delete it globally or just for that device?
Article Comments
Hello,
thank you for the KB-Post. This will only delete the sensor for this very device.
best regards.
Jun, 2019 - ...
Tue, 10 Jun, 2025 at 4:22 PM
Dear, I have 5980 snmp traffic sensors registered today, I would like to know if using libraries to create divisions I would have some performance impact on prtg.
Article Comments
Hi there,
Libraries do have a performance impa...
Tue, 10 Jun, 2025 at 4:22 PM
When i disabled the automatic device search after installation, how do I enable it again ? How do I trigger an automatic device search like the default after installation ?
Article Comments
Hello,
Thank you for the KB-Post. I&...
Tue, 10 Jun, 2025 at 4:22 PM
Dear Support,
We intend to have one of our company, using another licensed installation of PRTG.
To avoid duplicating monitoring, we would like to share some of our sensor within their installation.
What are the possibilities here ?
...
Tue, 10 Jun, 2025 at 4:22 PM
Hello Team,
I am not getting any email notifications on my prtg .
Even while sending test emails i am getting a pop up that says "A test notification was triggered and queued for delivery"
and the status i get in logs is Error sen...
Tue, 10 Jun, 2025 at 4:22 PM
Hello!
Is there any point to force all users move from PRTG web-interface to PRTG-Desktop app, if we want to reduce load on our Core Server?
Article Comments
Hi Vasiliy,
The load caused by the API calls of the desktop app co...
Tue, 10 Jun, 2025 at 4:22 PM
I have a custom sensor with 3 channels: avg_time, max_time, count.
In live data, those metrics are obviously correct. However, in historic data, the metrics are averaged through the period of time, and that's not very helpful.
I can use...
Tue, 10 Jun, 2025 at 4:22 PM
I am trying the 30 day demo. So far, I absolutely love this product. My one question is around my APC PDU's. Do I need to convert the MIB? Support seems lacking for these devices. Am I missing some native support somewhere?
Thank...
Tue, 10 Jun, 2025 at 4:22 PM
Dear all,
we are about to deploy a new PRTG environment. This is AD integrated.
I created multiple groups and added users to them.
Login and permissions are working fine.
However, when I try to alter the E-Mail address in the user acc...
Tue, 10 Jun, 2025 at 4:22 PM
Hello,
Can we set the Live Data Graph showing "Date" with time in PRTG?
(Now it is just showing Time only)
Thanks.
Article Comments
Hello Daniel,
Live Data Graph will show date automatically in case the graph cover...
Tue, 10 Jun, 2025 at 4:22 PM
Hi
We like to monitor the Jobspooler/Batch Enviroment of our MS Dynamix AX 2009R2.
I found some articles that it is possible with a MP for SCOM out of the box.
Sadly i dont find a Solution for PRTG.
The Only 3rd Party Plugin i found is this...
Tue, 10 Jun, 2025 at 4:22 PM
I would like to draw a horizontal line in graphs to indicate a limit, or have some similar indicator to see immediately when a pre-defined limit is breached. How can I achieve this? This article applies as of PRTG 25 Set Limit Markers in...
Tue, 10 Jun, 2025 at 4:22 PM
Dear, good afternoon how many simultaneous users does prtg support?
Article Comments
Hi Daniel,
I'm afraid there isn't an actual limit, as it depends mostly on the configuration of your instance, how many user groups, ...
Tue, 10 Jun, 2025 at 4:22 PM
I am looking at creating a sensor for clustered disks and mount points, but we regularly get alarms if the disk or mount point moves between servers. Is there anything that can monitor clustered disks and mount points even after the disks m...
Tue, 10 Jun, 2025 at 4:22 PM
Hi,
I am setting up PRTG for our company, and doing it the first time - there is a lot to do.
My company would like to monitor the windows client systems, both towers and laptops. Is there a way for autodiscover to target only client syst...
Tue, 10 Jun, 2025 at 4:22 PM
Hello,
I need to change the comment of a group and all subgroups to the same value. I have read a lot about batch editing using the management view. But there I have no possibility to change the comment of the group. Is there any way to a...
Tue, 10 Jun, 2025 at 4:22 PM
Edit from Paessler Support: Please consider that this third party tool comes without any warranty or support from Paessler.
For those who would like to use the Grafana dashboard app with PRTG, I've created a plugin for PRTG. With Gra...
Tue, 10 Jun, 2025 at 4:22 PM
Note: Only to know if the PRTG uses some known database for storing all the information coming from the system and the probe. Example: MySQL, PostgreSQL, SQL Server, among others.
Article Comments
Hi Jonathan,
PRTG comes with ...
Tue, 10 Jun, 2025 at 4:22 PM
I need a custom script that will report green on an SSL connection reset. This is to prove that website category blocks are working on a firewall device. Can anybody help?
Article Comments
Tue, 10 Jun, 2025 at 4:22 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to use enhanced configuration possibili...
Tue, 10 Jun, 2025 at 4:22 PM
We have recently setuped the ping sensors to "Master object for parents" in our setup, and maybe i misunderstood how to setup it, but we had an issue with one server, and every sensors (including the Ping) turned to "Paused b...
Tue, 10 Jun, 2025 at 4:22 PM
Hi awesome Paessler support team,
Currently, PSRT is running with 8444 as a secure port.
Can i redirect http(80) to https(8444)?
I tried it, but it failed.
Thank you
Article Comments
Hi there,
The automatic redirect is act...
Tue, 10 Jun, 2025 at 4:22 PM
Dear Support,
i have following Problem:
If i exec this Scritp on the powershell of PRTG Server, everything works fine and i get all Values.
But if i Run it with a PRTG Sensor ill get an Error, i wonder why the Script is Executed with...
Tue, 10 Jun, 2025 at 4:22 PM
Hello Support-Team,
we got some Cisco 2960X-48FPD-L access switches. When we added the sensors:
- System Health Other
- System Health Voltages
we discovered that these two sensors have a strange behaviour. When they are created, they are sw...
Tue, 10 Jun, 2025 at 4:22 PM
Hi.
I am currently implementing prtg to monitor my server farm for WMI. With the Local server (Server where PRTG is installed) everything works fine. However, with the other servers give me problems two Sensors in specific :.
CPU Load:
WM...
Tue, 10 Jun, 2025 at 4:22 PM
Hello!
We plan to use QoS Round Trip Sensor to make a measure of internet channels quality between our offices. Every remote office and our main office has it's own Probe. But when we creating this sensor it does't work (Timeout, ...
Tue, 10 Jun, 2025 at 4:22 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
User Story
As a PRTG User, I want to easily find children, parent objects when I request all info on an object (sensor, device and group) with an API call.
...
Tue, 10 Jun, 2025 at 4:22 PM
I am trying to monitor some remote users. The alert for latency, packet loss works fine. I want to create a different state on the map for the sensor when the user is not connected. Let say make the sensor orange. can i do that?
A...
Tue, 10 Jun, 2025 at 4:22 PM
In the PRTG we want to set up dependencies, but we don't know it properly.
For example, we have 2 firewalls, fw1 and fw1 behind fw2.
We would like to set if fw1 goes down, all sensors of fw2 will be paused.
And.
If only fw2 goes down, ...
Tue, 10 Jun, 2025 at 4:22 PM
Hello,
we monitor each ESXi and its machines separately. This way, in case a vcenter fails, monitoring is not impacted at all.
Sadly, this way, PRTG is not aware of the other cluster nodes and therefore we get alerts whenever automated mi...
Tue, 10 Jun, 2025 at 4:22 PM
Hello,
We wish to monitor Broadcast frames flowing on our network.
Is it possible?
Article Comments
Hello,
thank you very much for your KB-Post. Monitoring Broadcasts is possible with using the according Additional Channels ...
Tue, 10 Jun, 2025 at 4:22 PM
I need a simple imap sensor that allows imap authentication that does NOT use SSL
Used to be one if I recall correctly
Please, suggesting changing the mail server is NOT what I am looking for, the sensor test will be across the private ...
Tue, 10 Jun, 2025 at 4:22 PM
User Story
As a PRTG User, I want to have all the device icons grouped together when zoomed out.
Details of User Story
We use PRTG to montior nearly 1000 active channel partner / end user connections (devices) located all over Austral...
Tue, 10 Jun, 2025 at 4:22 PM
Hello good afternoon, I want to monitor all the traffic of my asterik telephone exchange, could someone help me? How to perform the configuration?
Article Comments
Hi there,
Please note that PRTG does not provide default sen...
Tue, 10 Jun, 2025 at 4:22 PM
Hi ,
I wonder to know if it is possible to monitor windows activation status with prtg,
I found a kb post explaining this but I want it to be elaborated more (https://helpdesk.paessler.com/en/support/solutions/articles/62403-windows-activa...
Tue, 10 Jun, 2025 at 4:22 PM
Hi
I'd like to Auto Discover and Monitor only Interfaces on my cisco switches witch I tag by the interface description.
Example: tag <MON>
interface FastEthernet0/1
description <MON> text
--> Port monitored in PRT...
Tue, 10 Jun, 2025 at 4:22 PM
Hi. We have recently rebuilt our PRTG monitoring setup and are now looking at the Services running and the Service account privileges. Least privilege is an important part of any security plan. With that in mind is it required for our PRTG...
Tue, 10 Jun, 2025 at 4:22 PM
I have PowerShell running on Windows Server 2012 R2 Datacenter and am currently running PS v4.0. Are there any issues with upgrading to v5.1?
Article Comments
No known issues with that one - update away!
Kind regards,
St...
Tue, 10 Jun, 2025 at 4:22 PM
Hi,
We have a scenario in our environment where I want to delete a sensor when its status changes to down. I know that deleting a sensor can be done through the API (I have used the API to auto-acknowledge certain sensors when they go down)...
Tue, 10 Jun, 2025 at 4:21 PM
I'm trying to add an SNMP traffic sensor to one of our Linux web servers, but Step 2 of the add process shows "No Interface Number available". I tried checking the server with SNMP Tester, and running that with "Scan Inte...
Tue, 10 Jun, 2025 at 4:21 PM
Hello,
We have a vcenter cluster - with 1000+ VM -s in it.
We user SOAP sensors to monitor the hardware and storage - and would like to use the VM -s as well: but in case of VMs (for corporate structural reasons) it would be nice to be ab...
Tue, 10 Jun, 2025 at 4:21 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to create uptime/downtime reports that ...
Tue, 10 Jun, 2025 at 4:21 PM
I use PRTG as syslog server
and log data to disk
how do I open .evl data file ?
I try use notepad++ open there has many special character in .evl file
can I converter to normal txt format ?
Article Comments
The .evl database fi...
Tue, 10 Jun, 2025 at 4:21 PM
how do you do your monitoring for switched networks?
We have a handful of switches with redundant connections. The main connection is 10 GB, one or more backup connections with 1 GB and then there is an emergency connection with 100 MB.
How...
Tue, 10 Jun, 2025 at 4:21 PM
I have the following custom script:
$connection = Connect-VIServer -Server xxx.xxx.xxx.xxx -User xxxx -Password xxxx
Write-Host "<prtg>"
ForEach ($VM in Get-VM | where-object {($_.powerstate -ne "PoweredOff") }...
Tue, 10 Jun, 2025 at 4:21 PM
I'm looking for a template for Dell System Health via iDRAC 9. The built in 'Dell System Health' iDRAC sensor is not working for me, adding this creates a blank sensor with no channels defined. I'm querying the iDRAC directl...
Tue, 10 Jun, 2025 at 4:21 PM
