kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi support Team,
is it possibile to view the previous configuration of two sensor before update PRTG server to release 22.1
Now the configuration il grey out and we need delete and create again this two sensors.
The same action is already d...
Tue, 10 Jun, 2025 at 4:58 PM
Hi All,
Hoping for some guidance on setting up a custom sensor that can use the results from 'nmap'.
I'm wanting to get the results from the below nmap command
nmap -sU -p 19302 --script stun-info stun.l.google.com
The e...
Tue, 10 Jun, 2025 at 4:58 PM
As an enterprise user of the PRTG tool, we need an intermediate period of time ("WEEK") between a 24 hours Graph and 30 days (or a month) graph. Its common to subdivide into Daily, Weekly, and Montly all the information, but in PR...
Tue, 10 Jun, 2025 at 4:58 PM
I cannot even restart the service the only way is to reboot the server then it will work for couple of days and randomly stop.
This is the message that I am seeing.
The server is Windows 2019
Faulting application name: PRTG Probe.exe, v...
Tue, 10 Jun, 2025 at 4:58 PM
Ich versuche aktuell, eine automatisch aktualisierende Liste an Graphen eines Geräteknotens zu erstellen. Wird also ein Gerät hinzugefügt, sollen dazugehörige Graphen automatisch in der Map auftauchen bzw. verschwinden, sollte das Gerät gel...
Tue, 10 Jun, 2025 at 4:58 PM
Over the weekend we updated from 22.2.76.1705 to the August update 22.3.78.1873. Since then I notice the Result Handling debug logs (eg those in C:\ProgramData\Paessler\PRTG Network Monitor\Logs\sensors) now only store the last result, with...
Tue, 10 Jun, 2025 at 4:58 PM
I am new to PRTG; monitoring was set up by a previous administrator and I inherited it. We are monitoring a dozen devices, all of which have a PING sensor.
Lately, we have been receiving simultaneous PING alerts for two specific computers...
Tue, 10 Jun, 2025 at 4:58 PM
Hello all,
We have PRTG V 22.2.76.1705 x64.
We're trying to monitor an external website that requires us to go through our proxy server (= FortiGate 500E). We've setup
"Advanced Http" sensor and have configured the p...
Tue, 10 Jun, 2025 at 4:58 PM
Hi,
Is there a way to export a sensor list with limits for each sensor?
I Have hundreds of temperature sensor and I'd Like to know the limits (warning/error).
Table looks Like
Sensor ID - Name - Warning (limit) - Error (limit)
Th...
Tue, 10 Jun, 2025 at 4:58 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG Admin I would like to use a native HP Aruba Switch s...
Tue, 10 Jun, 2025 at 4:58 PM
Hello!,
i m trying to create a HTTP Data Advanced sensor with the following settings:
i m using request Method POST:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/...
Tue, 10 Jun, 2025 at 4:58 PM
My VMware (SOAP) sensor is displaying An unknown error occured. Please refer to this topic for further information.
What can I do?
Article Comments
This article applies as of PRTG Network Monitor 19
VMware (SOAP) Sensor with...
Tue, 10 Jun, 2025 at 4:58 PM
Looks like PRTG auto setup ping dependency for devices that I am also doing port checks on tcp and disables the tcp port checks when ping fails. It looks like if I try to delete the objects in the master dependency list it will delete the ...
Tue, 10 Jun, 2025 at 4:58 PM
I’m trying to display the value of a channel in ios on an Ipad Pro. I can select the channel from the list, but the resulting widget is blank.
This happens for any channel.
Is this a known problem? Is there a fix or workaround?
Ar...
Tue, 10 Jun, 2025 at 4:58 PM
Hi team,
I have a problem with scheduled reports I have created. Some of these reports will fail to be sent via email, and I get an error ticket identifying that the message size exceeds the fixed maximum message size.
My reports conta...
Tue, 10 Jun, 2025 at 4:58 PM
On dell idrac with Access Controller version 8 Version 2.83.83.83 (Build 05), I have an error http/1.1 404 not found.
Error I don't have on an Integrated Dell Remote Access Controller 9 Version 5.10.30.00(Version 30)
if in the sensor p...
Tue, 10 Jun, 2025 at 4:58 PM
Hey all,
Really new to PRTG and love what I have seen so far, but need to find a way to monitor the DHCP pool on our cisco 2811 router. Any ideas?
Thanks,
Andy
Article Comments
Hello Andy,
we appreciate your contact.
Was...
Tue, 10 Jun, 2025 at 4:58 PM
I've tried several different custom URLs. Nothing seems to work.
Article Comments
Hello,
as Verizon is not part of the build-in SMS providers, the custom URL is the only option here. Does it work with another tool calling ...
Tue, 10 Jun, 2025 at 4:58 PM
Is there a way to monitor the status of the PoE on the HP switch's - recently we had a switch PoE function go bad - changed to "FAULT" status and stopped delivering power. Looking to monitor that condition / possibly more (cur...
Tue, 10 Jun, 2025 at 4:58 PM
After installing 2022-08 Security Update for Windows Server 2016 for x64-based Systems (KB5012170) on our Windows 2016 core server, noticed stability issues.
At least once a week all devices went into an unknown state, came back, back into ...
Tue, 10 Jun, 2025 at 4:58 PM
Hello,
i test in the moment different Trigger-Setups.
I need a trigger wich should send out only a mail if the sensor is 1h in failurestate.
My tested Trigger has the follow setup
State-Trigger
Sensor more than 3660sec in state down --&...
Tue, 10 Jun, 2025 at 4:58 PM
I have successfully setup email through a relay, I can test it just fine. However when I trigger any sensors, the logs say it sent an email however I don't get them. Any idea on why that would occur?
Article Comments
If yo...
Tue, 10 Jun, 2025 at 4:58 PM
Bandwidth sensors don't automatically have triggers setup for usage. We have hundreds of interfaces that we would like to have alerts on. There are a few issues.
After a bandwidth sensor is created, PRTG is no longer aware of the int...
Tue, 10 Jun, 2025 at 4:58 PM
I have a sensor with 3 channels. The channel that is my concern is a Lookup based channel.
I have defined the sensor with the following:
- Setting, Scanning Interval="30 minutes" and If a Sensor Query Fails="Set sensor t...
Tue, 10 Jun, 2025 at 4:58 PM
I want to install additional Python packages that are not included in the Python installation by default. How can I do that?
Article Comments
This article applies as of PRTG 22
How to install Python packages for the Python ins...
Tue, 10 Jun, 2025 at 4:58 PM
Hello,
Since we updated our system to "22.2.77.2204+" our FTP probes no longer work and show us the error message "Start SSL negotiation command failed. (SSL/TLS not available)".
Having not found an answer to this co...
Tue, 10 Jun, 2025 at 4:58 PM
I am trying to configure a "HTTP Push Data Advanced" sensor with TLS on a device managed by a remote probe.
When starting the sensor, I get the following error:
PRTG could not start the HTTP push receiver. Could not load root...
Tue, 10 Jun, 2025 at 4:58 PM
i know i can display the servers with allowed connections on powershell from the session broker by
Get-RDSessionHost -CollectionName "collection" | f1 Sessionhost, NewConnectionAllowed
this will display all the list of hosts...
Tue, 10 Jun, 2025 at 4:58 PM
I'm using reports to process some info with an external app, so i'm making reports using sensor tags to make more easy and automatic (when addsome type of sensor, its automatically add to the report too), this report attach the file...
Tue, 10 Jun, 2025 at 4:58 PM
Hi,
Is it possible to move a part of all the probes to a different server, for example by exporting the configuration of the sensors?
We have two different situations where we could use this:
- we first test our systems in the lab and wou...
Tue, 10 Jun, 2025 at 4:58 PM
According to https://www.paessler.com/manuals/prtg/object_manipulation#duplicating_clone I do the following (in Git Bash):
curl --insecure \
--data-urlencode "username=${user}" \
--data-urlencode "passhash=${pwdHash}"...
Tue, 10 Jun, 2025 at 4:58 PM
Hi,
After upgrading to PRTG Network Monitor 22.3.78.1873 my IMAP Roundtrip sensor fails during SMTP with the
"Helo command rejected: need fully-qualified hostname" message. The host sending the email has an FQDN setup in Windows s...
Tue, 10 Jun, 2025 at 4:58 PM
Hallo,
ich lese per Powershell-Skript die Remote-Registry von unseren Servern aus und habe daraus einen Sensor erstellt, der mir sagt ob ein Reboot ansteht oder nicht.
Allerdings möchte ich nicht pro Server ein Skript schreiben, sondern ...
Tue, 10 Jun, 2025 at 4:58 PM
Hey,
our sensors get queried every 5 min. However, we want to change the interval, in which a sensor is queried, to 1 min. after it has reached an error state. When the sensor is in the state good again, the interval should be set up to 5 m...
Tue, 10 Jun, 2025 at 4:57 PM
I get a ticket telling me that the Google Drive sensor is being deprecated.
What's replacing it?
I look at the page for it here here, but all it tells me is that the sensor is being deprecated.
This is a key sensor for us (as are...
Tue, 10 Jun, 2025 at 4:57 PM
Hi,
I get this error when I try to monitor a Windows Service using 'wmi service' - I get the same error message on all Windows servers - please advise me
Sorry, the scan for available monitoring items has failed!
Could not create ...
Tue, 10 Jun, 2025 at 4:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want a sensor that enumerates all crypto sui...
Tue, 10 Jun, 2025 at 4:57 PM
What causes the issues with my Packet Sniffer sensors?
Article Comments
Installing PRTG 22.x.75 on systems that run Windows Server 2012
PRTG 22.x.75 includes Npcap 1.60. This update affects the network adapter names that Packe...
Tue, 10 Jun, 2025 at 4:57 PM
I would like to monitor a Switch Port and get an Alarm when something is connected to the port.
Article Comments
Hi,
Perhaps you can add an SNMP Traffic sensor. Then add the switch port of interest.
On the sensor settings, s...
Tue, 10 Jun, 2025 at 4:57 PM
How to multiple apply Memory consumed (Percent) ID 9 on all sensor under vCenter VM?
Article Comments
Hello,
you can use multi edit on channel settings.
Please take a look in our manual regarding Multi Edit for this.
Kind...
Tue, 10 Jun, 2025 at 4:57 PM
Since PRTG don't has special sensors for Xerox Devices i'm trying to find MIB-files for creating SNMP Custom sensors. Most i'm interesting in paper quantity and toner level for devices:
WorkCentre 5740
WorkCentre 5325
WorkCentre...
Tue, 10 Jun, 2025 at 4:57 PM
PRTG 9 seems to have introduced the concept of acknowledging an alert for a period of time (e.g. 30 minutes, 1 hour, 3 hours etc.)
Unfortunately, a flapping sensor will reset this acknowledgement every time it reports "up", whic...
Tue, 10 Jun, 2025 at 4:57 PM
Hi. Is there a way for prtg probes to automatically restart after network layer outage?
We had a switch outage and when that was resolved the probes were still down and they had to be restarted before they recognised systems was back up.
...
Tue, 10 Jun, 2025 at 4:57 PM
Hi,
I'm a newbie here and still trying to learn PRTG :)
I have an equipment that generates an alert with a certain OID but the last digit (sequence number) is generated dynamically.
What I want to achieve:
Walk the incomplete O...
Tue, 10 Jun, 2025 at 4:57 PM
Hey there,
is it possible to "Start Maintenance Mode" and "Stop Maintenance Mode" for a specific cluster node (under "Cluster Status") via API? Starting the maintenance mode is the only thing that needs to be...
Tue, 10 Jun, 2025 at 4:57 PM
Hello,
I am a novice on Prtg and PowerBI and my boss asked me to retrieve data on PRTG. Thanks to its API to display them in Power BI after having done a lot of research that did not lead to anything.
I would like to know how to con...
Tue, 10 Jun, 2025 at 4:57 PM
Hello
Is there a way to hide IP`s in the notification when PRTG sending email to notify client ?? like prevent sending IPs of traps or logs or IP of the device , this is very critical.
thank you
Article Comments
Hey,
If the ...
Tue, 10 Jun, 2025 at 4:57 PM
Hi,
Can I search device by IP address in PRTG API?
Article Comments
Hi,
Do you want to generate a list of IP addresses for your devices via PRTG API?
Or you just want to search for a specific IP address within PRTG?
On m...
Tue, 10 Jun, 2025 at 4:57 PM
Hi folks
I want to monitor the lastdirsync status of Azure AD Connect with PRTG.
For this I have written a ps1 script and get the minutes of the last sync correctly output in integer numbers.
Now when I output the script in PRTG, PRTG n...
Tue, 10 Jun, 2025 at 4:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I would like to display the IP address of the ...
Tue, 10 Jun, 2025 at 4:57 PM
The delay of my HTTP notification is about 3 Minutes from the failure until the notification is actually being sent. How can i make the webhook sending immediately (or after the defined time in the notification settings of the sensor) after...
Tue, 10 Jun, 2025 at 4:57 PM
I would like to resolve an important doubt before making the decision to proceed with the update.
I checked the topics about version 22.3.78 and saw that there is a "Change" referring to "tree version".
It is quoted:...
Tue, 10 Jun, 2025 at 4:57 PM
Hi Guys,
I tried to add the "SNMP CISCO ASA VPN Traffic" sensor but there was an error about IPSEC configuration, after checking through similar topic in the community, I realized I can import the MIB file to monitor the tunnel ...
Fri, 6 Jun, 2025 at 11:27 AM
When adding a Windows Print Queue sensor, the UI hangs and it never completes. How can I find out why and resolve issue?
Article Comments
Hello,
Thank you for your message.
According to the behavior you get, PRTG seems not a...
Tue, 10 Jun, 2025 at 4:57 PM
we want to monitor the up and down state if the tunnels on our CISCO 2951 router
do we need to import the mib file of the CISCO 2951 into ptrg and is it possible to monitor the up and down state of this devices
Article Comments
...
Tue, 10 Jun, 2025 at 4:57 PM
Hi, im trying to set up an Allnet Temprature sensor. I found an article from Allnet (https://service.allnet.de/index.php?/Knowledgebase/Article/View/318/0/allnet-msr-und-prtg (only in german)) with an .template file. {
"prtg":{ ...
Fri, 6 Jun, 2025 at 11:27 AM
Hello
How can i generate report for SNMP trap receiver sensor. I need to see all traps and events received in this sensor over a period of time
Article Comments
Hello Brian,
I'm afraid that historic reports cannot be cr...
Tue, 10 Jun, 2025 at 4:57 PM
I'm not a networking guy and know little about it. But to keep an eye on my internet provider (speed and quality of service) I thought I would install PRTG. I see no reason to add all the devices in my house, but autodiscover added most...
Tue, 10 Jun, 2025 at 4:57 PM
Hi,
As we are frantically deprecating Basic Auth for our customers one of the last steps is getting rid of our IMAP sensors. We are able to set up the Microsoft 365 mailbox sensors but the problem is that these have way less options than...
Tue, 10 Jun, 2025 at 4:57 PM
Hello all, I am setting up a custom sensor that is using a custom Lookup Graph. It is using a Powershell script to poll for port status on a switch, and it then converts the port status to a numerical value that is an int which is confirmed...
Tue, 10 Jun, 2025 at 4:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
We need to keep the acknowledge status over time, even if we r...
Tue, 10 Jun, 2025 at 4:57 PM
Hey
We currently have an environment of around 7000 sensors. (which is why bulk edit would be nice)
Our primary problem right now is that none of our CPU Load sensors, have been set with any warning/alert limits.
Is there any way to d...
Tue, 10 Jun, 2025 at 4:57 PM
I have a use case where I would prefer not to open inbound ports to my main PRTG server, however, outgoing to a remote site would work great.
Is it possible to configure PRTG Remote Probes to listen for incoming connections from the PRTG ...
Tue, 10 Jun, 2025 at 4:57 PM
Ich habe zur Zeit das Problem, dass Webchecks mit dem o.g. Sensor bei mir nicht richtig funktionieren.
Nutze ich als verwendeten Browser Chromium, bekomme ich (bei unterschiedlichen Websites) entweder die Fehlermeldung "Unable to navig...
Tue, 10 Jun, 2025 at 4:57 PM
Hello,
See https://imgur.com/a/XbkiN24, the currently installed version is much higher than the "latest available from Paessler".
Regards,
Philippe
Article Comments
Hello Philippe,
Thank you for the KB post.
Un...
Tue, 10 Jun, 2025 at 4:57 PM
Hello everyone,
I've created a script gives information about how many emails have been delivered to a certain mailbox in a certain amount of time.
When the sensor runs it will always return an "Access Denied" error messag...
Tue, 10 Jun, 2025 at 4:57 PM
We just set up PRTG to evaluate it. Added a SQL Server and after enabling WMI firewall rules, the auto-discovery worked fine and added a few sensors.
However, when we try to manually add the WMI Microsoft SQL Server 2016 sensor, we get th...
Tue, 10 Jun, 2025 at 4:57 PM
Can I monitor a cisco switch from another region
Thanks for the time and the answer!
Article Comments
Hello Alejandra,
Thank you for contacting PRTG support.
If you want to monitor a device from another region what you can...
Tue, 10 Jun, 2025 at 4:57 PM
Can someone please confirm can we do below mentioned with PRTG.
Discover all types of applications i.e LINUX based ,Window based, MAC OS
The solution should be able to collect the data from the different application Platform.Open Tele...
Tue, 10 Jun, 2025 at 4:57 PM
Having trouble connecting to Hyper-V cluster storage using the PRTG powershell sensor for WinRM.
When running "Test-WSMan -ComputerName "Server name" -Authentication default" from the PRTG server i get wsman fault code...
Tue, 10 Jun, 2025 at 4:57 PM
Hello,
Simple question.
How can i tell the sensor that it's an error if no email match ?
Atm it's always green, even if 0 email match.
Article Comments
Hi there,
This can be achieved through the use of Channels Limit...
Tue, 10 Jun, 2025 at 4:57 PM
Can PRTG Network Monitor monitor and display memory usage for all processes individually? I am trying to figure out what's causing a sudden resource depletion on a Windows Server 2019 system, but the event only occurs on the weekend. I&...
Tue, 10 Jun, 2025 at 4:57 PM
I have more or less 13.000 sensors on my prtg. How can i get the name/device of these sensors via API? Is it possible?
Thanks.
Article Comments
Hi there, thanks for your question. You can get a full list of devices using the f...
Tue, 10 Jun, 2025 at 4:57 PM
We need monitor haproxy via prtg
Article Comments
Hello Dear customer,
Thank you for contacting PRTG support.
There is no native sensor in PRTG but you might check the HA Proxy documentation if there is some kind of SNMP int...
Tue, 10 Jun, 2025 at 4:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
Details of User Story
Hello,
there is a feature SNMP community indexing...
Tue, 10 Jun, 2025 at 4:56 PM
Hello,
I want to customize the page of "device -> Sensors With Status Down" and only show the sensors with the same tipology or tag, can i have more that one page of down sensors to answer the restriction of one probe ?
...
Tue, 10 Jun, 2025 at 4:56 PM
We've started implementing Subject Alternative Name (SAN) SSL/TLS Certificates in our environment. I suspect the SSL Certificate Sensor isn't currently capable of differentiating the SAN Certificate alternative name from the SAN Cer...
Tue, 10 Jun, 2025 at 4:56 PM
Hello,
we monitor a Synology DS218+ and everything works fine. The Web Interface of the NAS shows a Warning message for Disk 1 because of too many bad sectors. The problem is, that in PRTG the state of the drive shows ok. We would like to p...
Tue, 10 Jun, 2025 at 4:56 PM
What sensor is best to monitor a URI that requires a logon and will download a json file and you need to check the contents of that json file for a keyword.
Article Comments
Hi there,
First I would like to know whether you wan...
Tue, 10 Jun, 2025 at 4:56 PM
Hello - we have multiple Slack channels where PRTG notifications go. We'd like mentions to be an added feature so users will get notified (@ here, @ group name, etc.) rather then having to check multiple channels a day for critical noti...
Tue, 10 Jun, 2025 at 4:56 PM
Hi all,
is possible to divide PRTG Server in 2 parts:
-Back-end installed in DMZ;
-Front-end accessible by web Gui
Article Comments
Hello,
If you mean by back end the part which is querying the devices and by front end the s...
Tue, 10 Jun, 2025 at 4:56 PM
Hello,
We are trying to audit how many sensors are monitoring a specific URL. We found that after pausing the sensors on the probe for that URL, we are still seeing requests come in to that URL from PRTG. We tried the search functionality...
Tue, 10 Jun, 2025 at 4:56 PM
Hi all,
I have 2 Aruba Controller with a DNS v2 sensor. One of the controller (Controller 1) DNS v2 sensor is working while the other one (Controller 2) got the error as above. I tried to clone the sensor from Controller 1 to Controller 2...
Tue, 10 Jun, 2025 at 4:56 PM
We have a remote probe in singapore that has changed external IP.
Its still a functional prtg remote probe but is now down and i need to fix it.
What do we need to do to get it connected to core again?
I need to allow new ip into core f...
Tue, 10 Jun, 2025 at 4:56 PM
Hi all!
Can i install a remote probe on a windows core server? And, when i install the Probe agent on the host and put the SNMP, i had to install something more ?
Thanks all.
Article Comments
Hey, thanks for you question. Un...
Tue, 10 Jun, 2025 at 4:56 PM
I would like generate a report on a single sensor for documenting the up/down status
Article Comments
Hello there,
You may want to check the following KB https://helpdesk.paessler.com/en/support/solutions/articles/88974 which ...
Tue, 10 Jun, 2025 at 4:56 PM
Is there a way to determine the OID of an SNMP sensor?
That is, we are monitoring the traffic from a firewall and I want to know what OID the sensor is using.
Thanks
Olly
Article Comments
Hello,
you can only check this w...
Tue, 10 Jun, 2025 at 4:56 PM
I wrote a script, however when it runs in prtg-desktop, the values display as zero.
The script is shown below:
# description: a PRTG check that displays free space, for various filesystems, ignoring tmpfs, devtmpfs, squashfs. PRTG prefe...
Tue, 10 Jun, 2025 at 4:56 PM
My config setup -->System Administration-->Notification Deilvery
SMTP Delivery Mechanism :Use SMTP relay server (recommended inside LANs/NATs)
SMTP Relay Server :smtp.gmail.com
SMTP Relay SMTP Port:587
SMTP Relay Authentication:Use ...
Tue, 10 Jun, 2025 at 4:56 PM
Hi,
we are running PRTG in the latest 14 Version with an AD Setup. On start with PRTG i created multiple Groups to get status messages to different supporters (e.g. our Intranet Devs getting Intranet Service related messages etc.) and to ...
Tue, 10 Jun, 2025 at 4:56 PM
anyone get the Microsoft 365 sensor to work? advanced sensor.
The sensor could not authenticate with Microsoft 365. Check your credentials in the device settings. Authentication failed: ChilkatLog: ObtainAccessToken: DllDate: Jul 24 2019 ...
Tue, 10 Jun, 2025 at 4:56 PM
Hi Guys, can PRTG store configuration changes made on a device such that when previous configuration is needed it can be generated.
Article Comments
Hello,
I'm afraid this isn't possible as PRTG is intended to be a moni...
Tue, 10 Jun, 2025 at 4:56 PM
Hello, I need to get historical data of all ping sensors present in the group. Is this possible?
I created a library for these sensors. Can I do it with the library ID?
Article Comments
Hi, thanks for your question. Yes, this is...
Tue, 10 Jun, 2025 at 4:56 PM
Hello , i have many sqlsensor , when there is a fault in my system , i got red sensor for just 2 minutes and return green normally , this sensors working so good but just this issue even sometimes i don't notice that there was a fault i...
Tue, 10 Jun, 2025 at 4:56 PM
Hello, i would like to deploy a expose my core to external users of mine, can i send the data from the probes to a second core in the DMZ for example?
Thanks.
Article Comments
Hello,
A Remote Probe only supports one Core Serve...
Tue, 10 Jun, 2025 at 4:56 PM
Hi,
we are using Tags to automatically add our important Devices to specific Librarys wich generate SMS / Mail Alerts. But now and then, some of the sensors in a device don´t need the same settings as the others. Then I change the setting...
Tue, 10 Jun, 2025 at 4:56 PM
I would like to know how to fix it. The sensor has no data yet. I already check the database monitoring folder and no future folder. Thank you in advance
Article Comments
Hello dandelcruz,
Thank you for the post, is your probe...
Tue, 10 Jun, 2025 at 4:56 PM
How can i get a list of all the tags that are in use in the system?
Article Comments
You'll get the tags and the raw version of it in a csv list with this API call:
http://<your-prtg>/api/table.xml?content=sensors&...
Tue, 10 Jun, 2025 at 4:56 PM
User story
As a PRTG user, I want to combine the power of PRTG and Dynatrace into one. This way our observability reaches higher levels and we also keep an eye on our network performance. This could also improve our SRE.
Details of user...
Tue, 10 Jun, 2025 at 4:56 PM
Looking for a network configuration management to manage router and switch configurations, schedule backups, and generate configuration changes reports.
All i can see is network monitoring tools
Article Comments
Hi Kaywusful, ...
Tue, 10 Jun, 2025 at 4:56 PM
