kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
How do I renew my subscription to PRTG Network Monitor 1000?
Article Comments
Hello,
please just simply get in contact with our Sales team with an email to sales@paessler.com or login to the Customer Service Center on our Webs...
Tue, 10 Jun, 2025 at 2:46 PM
I would like to find out if there is a way to create a custom sensor to monitor which tests are being taken in certain web applications by specific users, also if I can monitor the users that are logged on to that specific web site or web a...
Tue, 10 Jun, 2025 at 2:46 PM
Hi Guys,
I have DRBD mounted on LVM partition
/dev/drbd0 50G 46G 1.7G 97% /mysql-drbd
here is my LVDISPLAY output
http://screencast.com/t/c2sn1xasB4
I also added disk checks in my snmpd.conf as shown below
disk /...
Tue, 10 Jun, 2025 at 2:46 PM
When I try to active Cluster Failover Node on master one, i don't see anything in Cluser Setting except "save canges" button
Article Comments
Hello,
can you please send us a screenshot showing the issue via email...
Tue, 10 Jun, 2025 at 2:46 PM
Our groups and notifications are growing rather complex and I was wondering if there exists a way to generate a report on the data or even export it so i could then import it into something that can create the needed report.
Artic...
Tue, 10 Jun, 2025 at 2:46 PM
can i setup a graph that after a threshold is met the graph line will turn a different color?
Article Comments
Hi,
I'm afraid this is not possible. Sorry.
There is a exception but this one is a bit complicated. You might t...
Tue, 10 Jun, 2025 at 2:46 PM
Hi
how can i monitor the free space that will treger at 15% or less ?
https://dl.dropbox.com/u/18472823/prtg.jpg
thanks a lot
Article Comments
Hi,
you may define error and warning limits for each sensor in the "Chann...
Tue, 10 Jun, 2025 at 2:46 PM
How can i customize my messages to get only topic of alarm and maby short describe without all history in email like groups history comments and etc ?
Article Comments
Hi,
to modify the notification, please go to "Setup&...
Tue, 10 Jun, 2025 at 2:46 PM
Hi,
I want to create a notification that triggers when 50% of devices fails.
any way i can do that?
Thanks
Article Comments
Hi,
I'm afraid that is not possible. Sorry.
Best regards
Jul, 2012 - Permalink
PTF.Senso...
Tue, 10 Jun, 2025 at 2:46 PM
I'm trying to monitor a virtual machine its cpu load, Memory and users logged in.
Il get the following error back:
Status: down, Error: Connection could not be established (80070005:acces denied - Host *host*.*domain* user: administra...
Tue, 10 Jun, 2025 at 2:46 PM
Hello,
I'm in the process of setting up an advanced custom sensor. Is it possible to create an ID field for each channel to identify the channels uniquely instead of the channel name. This would make the custom advanced sensor much mo...
Tue, 10 Jun, 2025 at 2:46 PM
We have several remote sites connected by T1 data circuits. Each site has a local server with a PRTG remote probe installed. I would like to measure the ping times to each location from the corporate headquarters. When I ping from a comm...
Tue, 10 Jun, 2025 at 2:46 PM
i want to check service on my linux server's like httpd service .
i check it whith http transaction but http stopped and i not get any notification.
can i check this service in linux server whithout check url only on server ?
Ar...
Tue, 10 Jun, 2025 at 2:46 PM
I'm looking for specific information regarding the Errors In & Errors Out optional channels within the SNMP Traffic Sensor. I have a need to monitor the Input, Output, CRC, and Frame error interface statistics. I would prefer to n...
Tue, 10 Jun, 2025 at 2:46 PM
We are not sure how to configure SNMP trap receiver to work with sensors.
We have different groups with different devices that can send traps.
But the trap receiver can only be setup on probe.
How do we forward the reception of trap to spec...
Tue, 10 Jun, 2025 at 2:46 PM
I have a group of Physical servers and I would like to customize the notification for Ping down sensor only, to say "Physical server down" or something like it and the name of the server. Could anyone let me know if there is a way...
Tue, 10 Jun, 2025 at 2:46 PM
I work in a place with different buildings and we manage different subnets for all of the network, i would like to know if there is a way to monitor a specific subnet with the PRTG sensors and receive notifications on their down/up state.
...
Tue, 10 Jun, 2025 at 2:46 PM
Firefox just had an update yesterday. Whenever I connect to Network Monitor with the AJAX interface, Firefox crashes.
This happens on two different computers that just updated their Firefox software.
Network monitor works if I use one o...
Tue, 10 Jun, 2025 at 2:46 PM
I have two identical machines running PRTG. The master node will start to eat up system memory overtime while the failover node is connected. Once failover is disconnected by setting it inactive or stopping core server service, there is a h...
Tue, 10 Jun, 2025 at 2:46 PM
I deleted a weekly report, but I keep getting email (with an empty report) from the backup server. How do I get rid of it?
Article Comments
hallo,
what do you mean by backup server? The failover node in a PRTG Cluster?
Jul...
Tue, 10 Jun, 2025 at 2:46 PM
hello
does upgrading from prtg 9 to 12 requires re activating the license?
Article Comments
Yes, it does.
Aug, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:46 PM
I need reinstall on my new server vmware and i dont have any idea where i saved the license.
Someone help me where can retrieve that?
Thanks a lot
Article Comments
Dear Neilson,
please log in to our customer service center...
Tue, 10 Jun, 2025 at 2:46 PM
Hello,
My old certificate expired so I created a new one.
Now 2 of my probes (9 in total) have disconnected.
I restarted the Core and the Probe services.
I restarted the probes.
The 2 have the same problem:
Probe Healt status is dow...
Tue, 10 Jun, 2025 at 2:45 PM
I would like to add a device, so i can add several website sensors from different hosted servers. This will help to monitor the websites all from one place and as a sensor backup in case we lose connectivity to the hosted servers. This serv...
Tue, 10 Jun, 2025 at 2:45 PM
a report for a sensor that was working fine before now shows no more data.
I recently changed the scanning interval from 5min to 1min.
Article Comments
You changed the scanning interval from 5min to 1min on these sensors.
PR...
Tue, 10 Jun, 2025 at 2:45 PM
Hello, we recently had the need to change our PRTG Core Server. The problem was that we installed a trial version, because we could not stop our monitoring. Now we solve the problem, I need the server where is the Trial version has a regist...
Tue, 10 Jun, 2025 at 2:45 PM
Hallo,
ich habe eine Frage, bezüglich der MAPS. Ich möchte eine World Map erstellen mit unseren Sensoren, finde aber keine Möglichkeit dies zu erstellen? Könnten sie mir evtl. weiterhelfen?
Link: http://www.google.de/imgres?q=prtg+world...
Tue, 10 Jun, 2025 at 2:45 PM
Hi,
When monitoring my 2003 servers with the context switches /sec under WMI vital data, I noticed that the data is inconsistent with the performance monitor data. PRTG's numbers from this counter are gigantic in comparison to perfmon&...
Tue, 10 Jun, 2025 at 2:45 PM
Currently Notifications are able to be set by group and/or individually. This has serious limitations as you may want email notifications about one sensor but not of another or you may want notifications from one sensor to go to someone els...
Tue, 10 Jun, 2025 at 2:45 PM
Hello,
I need to create one sensor to monitor the number of processes running on windows 2k8 64bit r2.
Only the number of all processes running on the server.
How i can create this ?
Best Regards,
Rodrigo Araujo
ITMNETWORKS
Brazil
...
Tue, 10 Jun, 2025 at 2:45 PM
I ran the uninstall on a remote probe and it was successful. I rebooted both the remote probe and the main server but the remote probe still show up in the GUI and web as a Disconnected probe with the probe health as being down
Art...
Tue, 10 Jun, 2025 at 2:45 PM
The new SNMP Cisco ADSL probe is a really welcome addition. However, we have a significant number of routers with more than one ADSL interface. It appears that the new sensor only provides statistics on the first interface.
Is there any w...
Tue, 10 Jun, 2025 at 2:45 PM
I can get Firefox to work, but not IE. Our company uses Internet Explorer. Any recommendations I can make to allow the Sunburst to work within IE?
Article Comments
Which version of IE do you use?
Thanks.
Aug, 2012 - Permali...
Tue, 10 Jun, 2025 at 2:45 PM
please somebody can explain my how to configure right the imap round trip sensor for gmail ?
i get socket error 10060 and i not understand what is wrong with it
Article Comments
Hello,
the socket error 10060 usually means tha...
Tue, 10 Jun, 2025 at 2:45 PM
Bom dia,
verifiquei nas bases de conhecimento e no endereço que voces sugerem para calcular a configruação para monitorar meu ambiente. O problema é que me pareceu muito vago, e talvez nao seja a maneira mais correta. Preciso adquirir uma m...
Tue, 10 Jun, 2025 at 2:45 PM
Hello,
I have installed PRTG on a core server and also a probe remote on a different server. there was something weird that happened with the sensors the other day, causing more than 100 sensors from the remote probe to go into down state ...
Tue, 10 Jun, 2025 at 2:45 PM
Is there a way to have the PRTG syslog receiver do a DNS lookup on the source of each syslog message?
For example, right now I get this in the log:
1438: Severity "Warning" in [172.26.243.30: : 2012 Aug 6 14:03:19 PDT: %OSPF-4-D...
Tue, 10 Jun, 2025 at 2:45 PM
This is a problem that crops up a lot and has happened in many past versions of PRTG as well as the latest. Not exactly sure what the trigger is, but I think it may have to do with a sensor being paused/unpaused and/or after a probe is rebo...
Tue, 10 Jun, 2025 at 2:45 PM
Hi,
I would like to run PRTG under a specific AD service account. By default, the services use the local system account. When i try to change the user for the service, the core service comes up and stops immediately. To get it back up and...
Tue, 10 Jun, 2025 at 2:45 PM
When the physical server on which PRTG is installed is rebooted the PRTG Web Server settings default to use the "Localhost: Use 127.0.0.1". Consequently after each reboot we cannot access PRTG remotely until we use the Server Adm...
Tue, 10 Jun, 2025 at 2:45 PM
i configure smtp without username and password it say smtp work fine!
but then i put username and password i get error! connection closed gracefully
so is the some way i can get the smtp sensor trace conversation not only error ?
...
Tue, 10 Jun, 2025 at 2:45 PM
Probe Local probe
Group Servers
Device KIMWMWN64DB1 (KIMWMWN64DB1)
We'd like to change the host name shown in parentheses of the Device field to the IP address of the Device. Is this possible?
Article Comments
...
Tue, 10 Jun, 2025 at 2:45 PM
Hello,
We have one Windows Server 2008R2 which we check with some wmi monitors (cpu/diskspace/...). Now every few times a day these monitors return the error: error 80070005: Access is denied. The timing and duration of the error state is...
Tue, 10 Jun, 2025 at 2:45 PM
I'd like to know if there is a measurable performance impact on servers monitored with WMI sensors by PRTG. I doubt there's much of an impact when using sensors like SNMP, SMB free space and so on - but WMI?
At least on the probe ...
Tue, 10 Jun, 2025 at 2:45 PM
I've updated Sonicwall F/W and MIBs to 5.8.1. Ran discovery, now i have new ethernet sensors and the old ones show traffic from different ports.
Is there a way to edit the interface numbers so I can get the new ports associated with t...
Tue, 10 Jun, 2025 at 2:45 PM
How do I monitor the CPU and memory usage of a Linux process? The only sensor I see in PRTG is the WMI Process monitor, but I need to monitor a process in Linux.
Article Comments
Hello,
I'm afraid this is currently not po...
Tue, 10 Jun, 2025 at 2:45 PM
I am using PRTG version 9 and want to know how to add a sensor(s) to monitor my new Dell R610 server. The server is running HyperV r2 OS.
thanks,
tk
Article Comments
Hello,
this should basically be possible with all WMI S...
Tue, 10 Jun, 2025 at 2:45 PM
Hi,
In past versions of PRTG I've used a master object (ping) to pause an object if that sensor is down - works great.
Now in the latest version of PRTG (12.3.1.2420) I am unable to set this up anymore, as the child ping object is not...
Tue, 10 Jun, 2025 at 2:45 PM
We would like to monitor, how may VMs are running on a host - just the enumeration, how many are online / offline - as a number and not the machine names. Is there a way to customize such a sensor, because obviously there is not such a sens...
Tue, 10 Jun, 2025 at 2:45 PM
Hi,
we are trying to connect to linux server via custom ssh sensor, I added private key in prtg config + login via private key, but authentication doesn't work. (logging on linux host says authentication failure).
I tried the key pai...
Tue, 10 Jun, 2025 at 2:45 PM
I would like to see an blended view of results from PRTG while using the Web Server Stress tool.
Is this possible, or are there some suggested workarounds to make this almost seamless?
Thanks!
Article Comments
Hi,
I'm a...
Tue, 10 Jun, 2025 at 2:45 PM
My local probe is disconnected, aswell are the other probes disconnected.
I tried to restart it ,but it didn't worked.
I restarted my server it also didn't worked.
I scanned my system for errors:
------------
C:\Users\administrator&...
Tue, 10 Jun, 2025 at 2:45 PM
Hello, I know that issue about change ifIndex on linux machine is old and I think nobody solve it yet.
But my question is if there is any workaround on filtering in netflow.
for exemplo when I want to filter a flow by interface I setup ...
Tue, 10 Jun, 2025 at 2:45 PM
If I bought a 1000 sensors license. Do the number of sensors share between master & failover node and can we use the the failover node to monitor the devices of it own subnet ?
Article Comments
Hello,
in a PRTG Cluster th...
Tue, 10 Jun, 2025 at 2:45 PM
I'm looking for help getting SonicWall to provide reliable netflow to PRTG. I'd like to know about settings at both the SW end and PRTG to enable reliable handshake. I tried this some time ago, but the SW firmware wasn't stabl...
Tue, 10 Jun, 2025 at 2:45 PM
I am trying to edit the HTML for reports :
<#report type="averagetable" repnodeid="<@subid>" repsensid="<@objectid>" avg="<@tableaverage>" sdate="<@start>" edate...
Tue, 10 Jun, 2025 at 2:45 PM
Hello
How to do a partial restore?
We only have a backup D:\PRTGDATEN\Configuration Auto-Backups\PRTG Configuration (Backup 2012-08-16).zip which contains a single file.
Thanks & Bye.
Article Comments
Hello,
what exactly...
Tue, 10 Jun, 2025 at 2:45 PM
IIS Refresh Causing Sharepoint to Unload between the Hours of 12pm and 6am
Which is Causing Errors on PRTG.
Is there a way to stopping this or would it Cause Problems with Sharepoint/IIS.
If it would Could I stop PRTG Checking For Error...
Tue, 10 Jun, 2025 at 2:45 PM
Hello
Why are dependencies not showing when deleting?
For example, when deleting a group it is displayed "Benachrichtigungen verwenden dieses Objekt nicht" but there _is_ at least notifications using this group "Wenn der Sens...
Tue, 10 Jun, 2025 at 2:45 PM
I have a two part question.
1. If I have a network with 100 switches and a poll interval of 5 minutes, does PRTG spread the polling of the devices over that 5 minute period? Or does it poll all 100 devices at the same time every 5 minute...
Tue, 10 Jun, 2025 at 2:44 PM
Can I group a group and add sensors for multiple machines to this group. eg create a group called PageFile the add all the pagefile sensors for the servers in the Database group to the Pagefile group?
Article Comments
Hallo,
...
Tue, 10 Jun, 2025 at 2:44 PM
Hello
We have a two node (sql1 and sql2) active/active cluster (Windows 2008 R2) each running two SQL instances. PRTG is installed on both nodes, the master node is sql1. The cluster is named sqlcluster.
Trying to monitor these four SQL...
Tue, 10 Jun, 2025 at 2:44 PM
I added a lot of devices, but decided to change the device groups for better management of notifications.
How can I change the Parent Group of an existing device?
Article Comments
Hi,
you can move a device to a new group. The...
Tue, 10 Jun, 2025 at 2:44 PM
We use 1 core node in cluster with a failover node.
When the core node crashed the failover node said it became the master node.
After the core node came back online nothing was monitored in the time the core node was down.
How is this poss...
Tue, 10 Jun, 2025 at 2:44 PM
Please could you clarify the exact steps to simply monitor total broadband usage? We are baffled by the sheer range of options on PRTG and just want to get this simple side of it working!
We want PRTG monitor to fill only ONE role: to mon...
Tue, 10 Jun, 2025 at 2:44 PM
when using free disk spce sensor we get the error
connection could not be established (80070005: Access is denied
Article Comments
Hi,
please have a look at this article. The mentioned error code and possible solutions can b...
Tue, 10 Jun, 2025 at 2:44 PM
I just upgraded to version 12.3.2.2681 and now it hangs on processing when I try to open the map designer in the web based app.
Article Comments
Hello,
can you please run the following request against you PRTG, and then send ...
Tue, 10 Jun, 2025 at 2:44 PM
Hello Everyone,
I am brand new to PRTG and need some help.
I want to use the QOS sensor to emulate voice traffic and figure out where we are lacking on our network.
I have installed the remote probe, acknowledged probe and added QOS s...
Tue, 10 Jun, 2025 at 2:44 PM
i want to calculate the inbound and outbound values manually and verify the data captured from the r
I have router log with few command output. I need to calculate inbound and outbound values manually. can anyone help me how to do it?
Article Comments
Hello,
does the router not support SNMP or maybe Netflow/Sflow or similar? ...
Tue, 10 Jun, 2025 at 2:44 PM
Hello, I would like to ask why my SNMP traffic sensors for cisco tunnel interface changed sometimes.
For example, I have added a sensor monitoring interface tunnel 84. However, I have found that sometimes, the sensor would be monitoring int...
Tue, 10 Jun, 2025 at 2:44 PM
We have been evaluating Server 2012 and it seems that MS is not suppoting snmp settings in server 2012.
This is MS's public snmp stance. http://msdn.microsoft.com/en-us/library/windows/desktop/aa377981(v=vs.85).aspx
will pRTG suppo...
Tue, 10 Jun, 2025 at 2:44 PM
We are licensed for PRTG-1000 - but we recently asked for, and have received, a demo license so we could advocate for consolidating all monitoring in our local data center to PRTG. The last version we downloaded and installed before we appl...
Tue, 10 Jun, 2025 at 2:44 PM
Is there a way to monitor a particular domain's registration status? And date of expiry etc
Article Comments
hallo,
not out of the box, sorry. You might be able to crate your own custom .exe sensor that could do that
Au...
Tue, 10 Jun, 2025 at 2:44 PM
hallo liebes paessler team,
folgende problematik:
wir haben mehrere konica minolta bizhub-modelle im einsatz. diese sind im prtg-monitoringtool aufgenommen.
druch die auto-discovery wurden ein paar sensoren gefunden, unter anderem ein s...
Tue, 10 Jun, 2025 at 2:44 PM
I've put a powershell Advanced script in prtg but keep getting the output: missing prtg.
The script works fine in powershell.
The script contains a string to run C# code to make a Http request and should return a xml string with channel...
Tue, 10 Jun, 2025 at 2:44 PM
Hi. I add Upper Warning Limit (kbit/s) to sensor channel. In reports i can get uptime stats: time of up or down, but how i can get how much time when traffic was more than upper limit.
Article Comments
Hello,
I'm afraid i...
Tue, 10 Jun, 2025 at 2:44 PM
Hello,
I use a syslog sensor to monitor around 20 phones.
The only problem is that the syslog sensor cannot handle the messages all these phones send at the same time.
I know the limitation to this sensor.
I was wondering if there i...
Tue, 10 Jun, 2025 at 2:44 PM
the chart shows for a 5000 kbit/s port a 1 % capacity utilization when 2900 kbit/s in use. Should there not more than 50% capacity utilization to be displayed?
Article Comments
Hello,
can you please send us a screenshot showin...
Tue, 10 Jun, 2025 at 2:44 PM
hi there
usually a server has several network adapters!
our esxi hosts have 4 of them.
is it possible to configure them separate in case that there is only one adapter down prtg does not show the server as unreachable?
i tried adding a se...
Tue, 10 Jun, 2025 at 2:44 PM
Hello pls i would like to know how to find out which user on my LAN consumes the highest internet bandwidth.
Article Comments
Hi,
please see this article for this purpose.
Best regards
Aug, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:44 PM
I'm looking for a way to monitor a Backup Exec job byte count over a period of time. In my research I came across this site. Does anyone have any experience with this site? Better yet, is there a way to do this in PRTG natively?
BA...
Tue, 10 Jun, 2025 at 2:44 PM
If two customers have same IP subnet used for their servers, can PRTG monitor devices within the subnet of two customers with out conflict using two remote probes?
Article Comments
Yes, this is possible - as they are in 2 differ...
Tue, 10 Jun, 2025 at 2:44 PM
The auto discovery seems to find the ports but doesn't get any information.
I see a "no such name" error.
I had it working not too long ago but had to reset and reconfigure. So, I know that it will work (or did work).
A simpl...
Tue, 10 Jun, 2025 at 2:44 PM
How can I show Custom SNMP Strings in Maps?
Article Comments
Hello,
I'm afraid in the moment there is no map-object which puts out the 'Last message' of a sensor. Sorry.
best regards.
Aug, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:44 PM
Is there a way to customize the device page where we can show date collected by some sensor in the from of dial or graph or bar.
Article Comments
Hello,
custom pages are best done with Maps in PRTG.
best regards.
Aug, 20...
Tue, 10 Jun, 2025 at 2:44 PM
Is it possible to run formulae against values returned by SNMP queries?
Ex: Ability to compute delta for a custom sensor output between two consecutive pollings.
Article Comments
Hello,
you can do this simply with SNMP Custom ...
Tue, 10 Jun, 2025 at 2:44 PM
Is it possible to search a word in a website using silverlight ?
Article Comments
Not sure I understand, are you trying to use PRTG, or is this related to some other tool? Most search engines have can return that type of result...
Tue, 10 Jun, 2025 at 2:44 PM
How to deselect all checkbox one time in sensor that with lots of custom channels in livedata tab.
Article Comments
Hello,
sorry that is not possible in the moment.
best regards.
Aug, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:44 PM
I define two Packet Sniffer sensor with different speed above notification limit (Ex A 1Mb,B 2Mb) ,but sometimes I get wrong speed alert about B speed reached 1Mb.How to solve it ?
Article Comments
Hello,
can you please provid...
Tue, 10 Jun, 2025 at 2:44 PM
How do I...
Monitor a web page load time including Silverlight chart load complete?
Article Comments
Hello,
I'm afraid that might not be possible with PRTGs HTTP-Sensors.
best regards.
Aug, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:44 PM
if i have group of 10 devices and i want be notified only if 5 or above is down how can i configure my notification setting for it?
Article Comments
Hello,
sorry that is not possible to count the number of devices being dow...
Tue, 10 Jun, 2025 at 2:44 PM
We use web filtering. Facebook and playboy are blocked. However, every so often we will notice that filtering has failed and anything is accessible. We want to set up a PRTG test which would hiughlight that filtering has failed. An http get...
Tue, 10 Jun, 2025 at 2:44 PM
We need to monitor a websites login process the problem we are having is that we require cookie and session details to be passed to the login form. This means that we are not able to just post the username and password to the form as this w...
Tue, 10 Jun, 2025 at 2:44 PM
I have added new sensors to a Server. It shows the sensor as green how do I
change the color of a sensor Red Green Yellow etc. I have a German Version of Prtg
and cannot see anywhere to change the color if the sensor reaches a specific ra...
Tue, 10 Jun, 2025 at 2:44 PM
how to fix this problem?
Article Comments
Hi,
have you tried switching the email format to plain text? This can be done in the notification settings.
Best regards
Aug, 2012 - Permalink
when alert for sensor up or sens...
Tue, 10 Jun, 2025 at 2:44 PM
Hi,
I need to know some information about how PRTG works.
Actually i want to know exactly which ports are used to ping and SNMP services.
And also at which rate the monitoring is done, i mean what is the frequence of the ping send for the...
Tue, 10 Jun, 2025 at 2:44 PM
Is it possible to ring my phone as a notification option should a certain condition be met? I am already getting emails, and that works fine for the most part. The issue is, that when I'm sleeping, I don't really listen to the ema...
Tue, 10 Jun, 2025 at 2:44 PM
We two groups critical and non-critical.
Critical will also use a script we created to call the oncall tech for any down state. It will also send an email if it is warning and or down.
The next group of devices we only want a call 7am...
Tue, 10 Jun, 2025 at 2:44 PM
Hi,
Currently am testing with the FREE Version (10 Sensors) for short term until I get what am searching..
Am testing traps on the Cisco 65 and few 45s and 29s,
When tried to test a power supply fail, am having threshold from 1 is go...
Tue, 10 Jun, 2025 at 2:43 PM
If I want to edit an existing map, how can I disable the user interface (AJAX etc.) during the modification/time?
Article Comments
Hi,
I'm afraid it is not possible to "disable" the user interface. Sorry.
What yo...
Tue, 10 Jun, 2025 at 2:43 PM
