kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi
Hi need to export sensors data of a Specific Sensor "Group Name"(id=2853) with the following colums:
group,device,host,status
possibly colums separated by comma withouth the raw coulums.
Here is what actually i get:
...
Tue, 10 Jun, 2025 at 3:38 PM
I have installed the PRTG app on my phone. I have also set up push notifications.
Our PRTG server is only available when on corporate WIFI or via VPN.
I will get notifications when "offline", but I only see part of the notificatio...
Tue, 10 Jun, 2025 at 3:38 PM
I have a notification set up in PRTG that is performing an http action to send notifications via slack webhook. Currently every time a sensor is put in an alarm state, the notification throws the following error:
Failed to establish secur...
Tue, 10 Jun, 2025 at 3:38 PM
First of all I'm a very happy user of the PRTG Monitor software for many years. I've had my share of challenges, but so far have always been able to find a solution. However my current problem has got me completely stumped.
I...
Tue, 10 Jun, 2025 at 3:38 PM
I'd like to get a status report on how many sensors we have on each probe and which type of sensors they are. (snmp, wmi, etc)
Is this possible?
Article Comments
Hi there,
I'm afraid it's not possible to get a re...
Tue, 10 Jun, 2025 at 3:38 PM
Team,
How can you make graphs looks like bar graphs (filled in), rather than line graphs. The display is small and data points are hard to distinguish.
Thanks
Article Comments
Under Setup | System Administration | User Interf...
Tue, 10 Jun, 2025 at 3:38 PM
Is there any sensor for monitoring Cisco stacks switchs?
Article Comments
Hi Naseeb,
Did you already check the following article. If not, please take a look at it since it describes how to monitor cisco stack switches.
Mar,...
Tue, 10 Jun, 2025 at 3:38 PM
Hi,
recently we moved the (Local data file storage and monitoring database) and also (Path to probe data storage) from disk C: to disk D:
As our PRTG is located on a virtual server, disk C: \ is a virtual disk and disk D: \ is another v...
Tue, 10 Jun, 2025 at 3:38 PM
Hello, actually am using the PRTG web version but i cant find a way to manage my MacOs (High Sierra) on my LAN with SNMP. I tried to add a new device on the PRTG monitor with the private ip (192.168.0.6) and tried the ping sensor, but not...
Tue, 10 Jun, 2025 at 3:38 PM
Hi there, I am new to PRTG and have set up a few sensors for Azure servers, currently a disk space sensor gives a warning by sending an email as it goes 20% lower disk space, but when disk space is still decreasing, the sensor no longer sen...
Tue, 10 Jun, 2025 at 3:38 PM
Hi PRTG,
We noticed that some of our ping sensors have the following properties:
1. Downtime
2. Ping time
3. Maximum
4. Minimum
5. Packet loss
Whereas some of our ping sensors only have the following properties:
1. Downtime
2. Packet lo...
Tue, 10 Jun, 2025 at 3:38 PM
Dear Technical Support Team,
Hello
Is it possible to see the packet loss average percentage with decimal accuracy in PRTG historic data and reports?
Thanks a lot.
Article Comments
Hi Hossein,
The packet loss is displayed in...
Tue, 10 Jun, 2025 at 3:38 PM
HI How can I drawn more than one line between the devices on the Map on Prtg. example i want to connect switch ports. please help me i added the html that u created but nothing happen.
Article Comments
Hi,
Officially it's...
Tue, 10 Jun, 2025 at 3:38 PM
After reading a few other posts on the KB regarding requests for better monitoring for EMC SAN arrays, I took it upon myself to create something that provided the data I personally wanted to see about my SAN. This script requires naviseccl...
Tue, 10 Jun, 2025 at 3:38 PM
Hi all
As far i understood, PRTG cluster has no possibility of connecting to PRTG webserver using a virtual IP (VIP). When a PRTG master node fails, all clients and smartphones need to manually connect to the slave node.
I would like t...
Tue, 10 Jun, 2025 at 3:38 PM
Hi,
Well here's my problem: When the core server updates itself and after that starts sending the update to the remote probes, all the notifications (email alerts) located on the remote probes go crazy. How can I pause all the remote ...
Tue, 10 Jun, 2025 at 3:38 PM
Good Morning
I already created the sensor with all the steps of the t Powershell script, it runs the sensor it is in green state without errors, but it doesn't show information about the connected clients, the connected APs etc.
I fol...
Tue, 10 Jun, 2025 at 3:38 PM
Hi,
I have an appliance with a REST API which are returning a number of things, including the date and time of the last cluster sync.
I need to check that this date and time does not get more than one hour behind the current date and ti...
Tue, 10 Jun, 2025 at 3:38 PM
Hi,
###
<!--Custom Map Objects: Library Sunburst ID in HTMLbefore-->
<div class="map_object map_table <#sensor type="colorclassofstate" prefix="map_objectstate_" id="<@objectid>">...
Tue, 10 Jun, 2025 at 3:38 PM
A feedback form appears when I open the PRTG web interface. What is this about and how can I disable it?
Article Comments
This article applies as of PRTG 20.2.59
What is the trial feedback form and how to disable it
With PRT...
Tue, 10 Jun, 2025 at 3:38 PM
We have the DAG sensor applied to both member servers of the DAG. Each parent device is using and Exchange administrative account and the device is specified by the FQDN of the server.
Last night, I was running maintenance on the servers ...
Tue, 10 Jun, 2025 at 3:38 PM
Is there a way with PRTG that I can monitor particular services on this page https://health.autodesk.com/?
I've liked how PRTG created one for RingCentral, although it would be nice to limit it to services, we use
I think I can do it ...
Tue, 10 Jun, 2025 at 3:38 PM
When trying to upgrade to V20.x the enterprise console will not upgrade. No errors shown.
Article Comments
Hi there,
Please note that the Enterprise Console is deprecated. Please use PRTG Desktop instead.
PRTG 20.2.58 also p...
Tue, 10 Jun, 2025 at 3:38 PM
Convert message string to numbered value or how to monitor string messages of a sensor in a PRTG map
Hello there,
We are monitoring our Infoblox Appliance and using a Sensor created by using the Infoblox mib.
Sensor is "Ib Ha Status". This sensor returns a message with Passive or Active. But it does not create a channel, so t...
Tue, 10 Jun, 2025 at 3:38 PM
Hi PRTG support team,
we create several AD-DS groups and linked them without admin privileges to PRTG. Users are able to see all shared devices and sensors, but cannot mark obejcts as favorite.
What privileges are reqired to mark favorite...
Tue, 10 Jun, 2025 at 3:38 PM
Hi
i work in my station with 3 screens on one of them i open Prtg monitor
after couple of minutes PRTG page try to refresh and stuck on loading(refreshing) loop
the only way to solve it, its to open PRTG on new tab until the next ti,e...
Tue, 10 Jun, 2025 at 3:38 PM
Hi, I have a program that gets some data from purecloud´s api. Can I make a custom sensor for prtg using it? I would like to show the number o licenses used.
Article Comments
Hi,
If you can create a script which is able to pul...
Tue, 10 Jun, 2025 at 3:38 PM
A banner with Greg is constantly displayed and I do not need them.
Please let me how to forcibly remove these banner.
For example, the following banner keeps appearing.
-------------------------------------------------------
Let PRTG find...
Tue, 10 Jun, 2025 at 3:38 PM
Hi - trying to make use of MIB Importer and SNMP Tester to create new sensors on our devices. Not having any luck so far. I'm using an HPE Aruba 2930M switch as my target device; have obtained the vendor MIBs and imported using the MIB ...
Tue, 10 Jun, 2025 at 3:38 PM
hello ,i'm new to PRTG,i've searched about this topic and all what i found is how to login to PRTG server using android !
what i wanted to do is to activate SNMP or WMI (as in windows) in my android phone ,and monitor it as a devic...
Tue, 10 Jun, 2025 at 3:38 PM
Hi there, I'm trying to find if a user is still using his VM by pulling his last logon and I'm having trouble with the output.
When I run it in PS it works as expected, but in Prtg it only shows the message text without the date of ...
Tue, 10 Jun, 2025 at 3:38 PM
Hi
I try to monitor RSSI (Received Signal Strength Indicator) on my Cisco 819g router, but I can't see this type of sensor. Can someone help me with this, do I need some custom value to make this sensor?
Article Comments
H...
Tue, 10 Jun, 2025 at 3:38 PM
Hello,
Objective: to know the number of users connected to an OpenVPN Access Server.
What I want to do seems very simple:
I would like, via the SSH sensor, to retrieve the number contained in the response of an order.
The original ord...
Tue, 10 Jun, 2025 at 3:38 PM
Hi,
I need to create a summarized live map based on Average value in last hour.
I found this question for showing the sensor "value" on map:
https://helpdesk.paessler.com/en/support/solutions/articles/62000-values-only-on-map...
Tue, 10 Jun, 2025 at 3:38 PM
I'm using PRTG with Cluster which consists of 1 master node and 1 failover node, and there is 4 remote probe.
I'm going to add syslog sensors to a remote probe. How many sensors can I add ?
How many sensors are recommended?
A sp...
Tue, 10 Jun, 2025 at 3:38 PM
hello, thanks for the great support team, i'd love to continue using the software and go deep in it ,sometimes ,i face some problems:
i have huawei old modem ,has no snmp configuration in it , is there any way to monitor its services...
Tue, 10 Jun, 2025 at 3:38 PM
Hello,
In my scenario, I already have a PRTG 100 free sensors installed on one server. We purchased a surveillance system with 35 IP cameras and we want to monitor that too. It is possible installing another PRTG on different server and b...
Tue, 10 Jun, 2025 at 3:37 PM
the last weeks I have the following problem
In my office network I have my PRTG monitoring computer and some other ones.
In our datacenter, wich is in another location, anothe IPsegmet that is connected through a LAN2LAN VPN i have my ser...
Tue, 10 Jun, 2025 at 3:37 PM
Dear, good afternoon on all my servers the snmp it takes from 0 to 100%
but there is one that has a totally random value follow the link
https://imagizer.imageshack.com/img923/8436/po0ZT5.png
Article Comments
Dear Daniel,
th...
Tue, 10 Jun, 2025 at 3:37 PM
Hi Paessler, we are currently monitoring the downtime of our sensors. We also had our notification setup for our sensors. We noticed that the we are receiving SMS notification for the sensors that have low latency (?). This is the exact me...
Tue, 10 Jun, 2025 at 3:37 PM
I have a map using Alarms(Gauges) I would like to increase the size of the text that is shown on the map. Any advise would be greatly appreciated
Article Comments
Hello,
For this, you would need to create a custom map object t...
Tue, 10 Jun, 2025 at 3:37 PM
Hello,
I have no problem monitoring ILO4 and up,
But when it comes to ILO2 or ILO3, I have no way to set SNMP community on it,
Is there any way to monitor it with SNMP HP System Health?
Thanks
Article Comments
Hi there,
Yo...
Tue, 10 Jun, 2025 at 3:37 PM
Is there a way to setup a custom probe to produce a list of installed software?
Article Comments
Hello,
thank you very much for your KB-Post. I'm very much afraid PRTG cannot produce such an inventory list of installed sof...
Tue, 10 Jun, 2025 at 3:37 PM
Hi,
is there any way to monitor Windows Azure based services?
Our idea is to implement HTTP tests to monitor the service but we need to monitor also the servers (Worker Role, Server Role), CPU Usage, Memory,...; and also storage usag...
Tue, 10 Jun, 2025 at 3:37 PM
Hi, I am having a problem with a MySQL v2 Sensor.
I want to monitor a MariaDB (Verion 10.1.44) database on a Debian 9 server.
Errormessage: "Unable to connect to any of the specified MySQL hosts.".
I cannot connect to the databa...
Tue, 10 Jun, 2025 at 3:37 PM
Hello,
My company is an outsourced IT provider for small to medium businesses - approximately 1000 customers. I have PRTG running in a lot of my customer sites. We currently use Spiceworks to pull inventory data into our proprietary cust...
Tue, 10 Jun, 2025 at 3:37 PM
Hi all, I'm trying PRTG to replace our old nagios monitoring and I'm very happy how easy and well documented this tool are.
Anyway I need some help to get the temperature value from an environmental sensor made for Nagios (eesenso...
Tue, 10 Jun, 2025 at 3:37 PM
Is it possible to use an API call to return a list of notification templates and their statuses (Active or Paused)?
Article Comments
Hi there,
Unfortunately, that is not possible via PRTG's regular API. However if you want...
Tue, 10 Jun, 2025 at 3:37 PM
Dears,
I am really new with PRTG so please accept my apologies if my request is stupid.
I'd like to know if it is possible to run a report to obtain total bandwidth passing through a device.
I know it is possible to have result b...
Tue, 10 Jun, 2025 at 3:37 PM
I would like to know the specific commands used for:
SSH load average
SSH meminfo
SSH INodes Free
The reason is I need to know the permissions required in the target device to execute these sensors before I can ask for a user, so I ca...
Tue, 10 Jun, 2025 at 3:37 PM
Windows 10, latest updates.
Run PRTG Network Monitor installer as administrator (downloaded today).
Setup gets to "Updating Windows Firewall Settings" and opens a cmd window to netsh.exe
Nothing further happens.
Malwarebytes and W...
Tue, 10 Jun, 2025 at 3:37 PM
is it possible to get a phone call when Sensors go down?
Article Comments
Yes this is possible. Setup a SMS Notification and enter as Recipient Number your land-line phone number. The SMS to Speech Service (if available) will th...
Tue, 10 Jun, 2025 at 3:37 PM
Hello,
Is there any API or dashboard module for prtg and grafana integration?
Article Comments
Hi there,
Nothing that is officially supported but there is a PRTG Grafana plugin here:
https://github.com/neuralfraud/grafana-prt...
Tue, 10 Jun, 2025 at 3:37 PM
We have a need to check if a custom error page is correctly in place for certain servers based on Tomcat. Unfortunately, the HTTP Advanced sensor doesn't seem to get past (ignore) the 404 error and scrape the error page itself for text ...
Tue, 10 Jun, 2025 at 3:37 PM
Hello everyone,
I am new on PRTG and i'm loving it so far !
I have one demand: we are using a RDS Gateway and i'd like to know if there is a script or sensor that allows us to have the names of persons connected (we already have ...
Tue, 10 Jun, 2025 at 3:37 PM
Hello ppl at Paessler
I connected the SMS delivery feature of PRTG to Node-RED using its core 'http in' node. When I send a test message I sucessfully receive it but I notice PRTG resends it a few times. Do I need to acknowledge b...
Tue, 10 Jun, 2025 at 3:37 PM
We are having a problem with a client, when we restart the core server and it stays, for example, 10 minutes away. Is it normal to have a blank graph during this time? is there anything that can be done so that it doesn't appear?
foll...
Tue, 10 Jun, 2025 at 3:37 PM
Notification Triggers - exe program didn't work
i put the program exe in PRTG Network Monitor\Notifications\EXE
and create Notification Triggers
When Traffic Total channel is Above 1 Mbit/second for at least 60 seconds, perform SDN
W...
Tue, 10 Jun, 2025 at 3:37 PM
I have a MariaDB 10.3 on my Linux server that I want to monitor. I wanted to get the database size with the following query:
SELECT table_schema AS "Database",
ROUND(SUM(data_length + index_length) / 1024 / 1024, 2) AS "Si...
Tue, 10 Jun, 2025 at 3:37 PM
When I add a User Group as well as appear in the usual User Group pages in the System Administration the name of the group also appears in the Device Tree under the local probe (at the bottom of the list..) with the "Add Device" t...
Tue, 10 Jun, 2025 at 3:37 PM
Hi,
I'm trying to connect to PRTG to request some information via the API tools.
I'm requesting URL:
https://myserver/api/table.json?content=sensors&columns=objid,group,device,sensor,status,message,lastvalue&username=my...
Tue, 10 Jun, 2025 at 3:37 PM
Hi PRTG Admin,
Last year, I configuration PRTG & found Probe Health Disconnect & All Sensors often grey, then open case to PRTG (Case PAE1085211) This case already solve by set interval time to 5 minutes for all WMI sensors.
But...
Tue, 10 Jun, 2025 at 3:37 PM
Dear Paessler
We have remote probes running on many systems worldwide. These are deployed on devices that may loose internet connection from time to time. This does however not mean the probe server is in bad shape. Only that the internet...
Tue, 10 Jun, 2025 at 3:37 PM
We must have the option to display only DOWN messages for a report HTML template (Sensor Status History).
For each Sensor Status History Report not of course also Unknown Times (Updates, automatic PRTG service, maintenance window)
we'...
Tue, 10 Jun, 2025 at 3:37 PM
Dear Sir/Madam,
i have implemented PRTG for one of my customers.
He has also an AIX environment which he wants monitored.
Is there any possibility to for them to provide support in the form of providing command outputs that might help...
Tue, 10 Jun, 2025 at 3:37 PM
Hi, I´m getting data from an external api, I´m trying to show the result that is just a number. Rptg has a json format for the custom sensor, first I was using a try catch block in powershell, later I am just returning a json with an error ...
Tue, 10 Jun, 2025 at 3:37 PM
I'm running a remote probe locally on a device that I want to monitor using SNMP. Everytime I try to add a sensor I get the error "SNMPERR_BAD_SENDTO (SNMP error # -12)". What can I do to make it work?
Article Comments...
Tue, 10 Jun, 2025 at 3:37 PM
Hello!
What happening when i make a clone one of my Device? It same as create new device or clone connect to original somehow? Why clones are paused with comment "Pause by Parent"? They has Dependencies to it Original? Or they a...
Tue, 10 Jun, 2025 at 3:37 PM
Hallo!
Ich würde gerne einen Data Table anlegen und den MAX Wert der letzten 30 Tage einblenden.
Folgendes habe ich probiert, aber hat noch nicht funktioniert.
<!--Data Tables: Channels_custom-->
<div class="map_object ma...
Tue, 10 Jun, 2025 at 3:37 PM
I'm trying to use the Rest Custom sensor (along with a sensor template) to pull some data from a JSON feed but it's failing to do with with "Invalid character 'N' looking for beginning of value body".
Now this is...
Tue, 10 Jun, 2025 at 3:37 PM
Hallo zusammen,
Ich wollte mal nachfragen, ob dies überhaupt möglich ist oder jemand eine Idee hat, wie ich eine Gerätevorlage für Remote Probes machen kann.
Wir haben ca. 150 Server, welche alle mit einer Remote Probe ausgestattet werd...
Tue, 10 Jun, 2025 at 3:37 PM
Trying to monitor a FortiWLC using MIB I downloaded. Imported the MIB converted to OID with PRTG software. Setup snmpv3 on WLC gettign this error#-34 when trying to add the snmp library. Ive also used SNMP tester im getting the same error w...
Tue, 10 Jun, 2025 at 3:37 PM
I've been researching this but couldn't find a clear answer.
What I would like to do is once a specific trap is received, pass that to powershell for some custom handling related to the message. It is possible to do this? If not...
Tue, 10 Jun, 2025 at 3:37 PM
Hi,
I'm using python script to create json output for a custom sensor. In the json output I set 'text' field and this works ok for most of my devices, most of the time. However sometimes the value of the 'text' field i...
Tue, 10 Jun, 2025 at 3:37 PM
I have a Red Hat enterprise server with disk mount points I need to monitor. Is there a way to monitor those mount points within PRTG?
Article Comments
Hello,
Thank you very much for using PRTG. I'm afraid there is no dir...
Tue, 10 Jun, 2025 at 3:36 PM
Good afternoon!
Please tell me - is it possible to combine summary data on sensors?
I have about 400 devices, each device has a syslog sensor.
is it possible to somehow make the resulting page where information was collected from all 400...
Tue, 10 Jun, 2025 at 3:36 PM
Receive an error message when testing email notification. Using the built in SMTP function (no external SMTP relay).
Have read previous posts but the answer to previous posts is just a link to the manual. If I could figure it out from t...
Tue, 10 Jun, 2025 at 3:36 PM
Buenos dias, tengo una pregunta, la base de datos de las graficas de un dispositivo se puede personalizar, no la del sensor y ni tampoco la de la interface, si no el host en si, y tambien donde puedo sacar la grafica de disponibilidad del h...
Tue, 10 Jun, 2025 at 3:36 PM
Hi, Dears,
In the first, I wish you safety in the light of these circumstances
On 22/5/2020 I upgraded my PRTG software to the last version and it was done successfully and worked fine, For two days I faced issues with search engines wh...
Tue, 10 Jun, 2025 at 3:36 PM
Is it possible to limit the amount of notifications sent by PRTG during a period of time? We have had a number of occasions where WMI will fail on a host that may have 12 WMI sensors and because the parent sensor for ping is still up we get...
Tue, 10 Jun, 2025 at 3:36 PM
Hi Team,
I need to fetch the list of thresholds\channel settings of all sensors configured in PRTG Tool.
I need to fetch the settings that were configured so that the infrastructure can be monitored more effectively and the tool can be ut...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
A third-party compagny will send me only a part of PRTG devices/sensors that I should be able to my PRTG.
I have read about full tansfer form a server to another but did not find abiut part only.
COuld you help.
No matter of urgency.
Be...
Tue, 10 Jun, 2025 at 3:36 PM
I am getting the followed error, and I've been trying different ways to solve it with no result.
Error sending Email:
Status sending Email: DNS Server: x.x.x.x E-Mail: "xxxxxx@xxx.com". No MX records for the domain xxxxxx.c...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
i want to create a Dashboard with only Erros visible on a Map Editor in PRTG.
There is already under Datatable a table with all Errors and confirmed Errors.
This sample is already good, but the question is, can i remove the confirmed ...
Tue, 10 Jun, 2025 at 3:36 PM
For a project concerning the monitoring of 10 temperature sensors, I would like to use a map which would show the individual values of each sensor but also the limit warning values for them.
I found different map objects which can fit to ...
Tue, 10 Jun, 2025 at 3:36 PM
HI
We are implementing UCS/ACI and Hyperflex Kit from Cisco, and wondered whether there were any specific sensors/MIBs we could use to monitor this equipment?
Thanks
Article Comments
Hi there,
PRTG comes with the SNMP Cisc...
Tue, 10 Jun, 2025 at 3:36 PM
Guten Tag,
Leider bekomme ich beim Versand von SMS immer folgendes Ticket von PRTG:
{{{* Achtung: Es gibt ein Problem und Sie müssen etwas tun! *
Die SMS-Nachricht an 079XXXXXXX konnte nicht zugestellt werden. Es ist sehr wichtig, dass ...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
i need to setup sensor to monitor last update to a sql table, and monitor / error if over 24 hrs old..
eg sql :
SELECT TOP 3 [LastSync]
FROM [database].[application].[table]
order by LastSync desc
result:
LastSync
2020-06-05 19:3...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
I've successfully created a test Python script for PRTG however I faced a few problems along the way. The documentation in the KB (https://www.paessler.com/manuals/prtg/custom_sensors) seems to be focused on everything other than ...
Tue, 10 Jun, 2025 at 3:36 PM
Dears,
Please be informed that I Face Jump issue in all graphs of PRTG and this issue repeated daily for 20 Min then it back normal.
Please I need your advice here.
Article Comments
Hello,
Thank you for your KB-post.
Ar...
Tue, 10 Jun, 2025 at 3:36 PM
Hello Team,
I got an GoDaddy SSL certificate. GoDaddy offered the code for a seal in the footer for my public websites.
Is that possible? Can I modify the PRTG footer with a GoDaddy seal? If yes, can you help me?
Article Comments
...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
I have my TP-Link T2500G-10TS (TL-SG3210) but unfortunately I get a hard time to add it to PRTG. Is their any guide on how to add my switch on my PRTG? Do I need to import the MIBs file of T2500G-10TS (TL-SG3210) to PRTG? Take note th...
Tue, 10 Jun, 2025 at 3:36 PM
hi admin
I just migrated a PRTG server.
From the old PRTG, I copied the database monitoring file to complete the existing data record to copy the new migration server.
The strangeness arises when I look at historical data in May complete gr...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
Im struggling with how a should monitor my Windows VMs in vmware. I have my vcenter in PRTG with all my VMs and the metrics from there. But i also have my Windows VMs monitored via WMI. It feels like i am monitoring everything twice.
...
Tue, 10 Jun, 2025 at 3:36 PM
can you use Group Managed Service Accounts in PRTG and if so what is the process?
Article Comments
Hello Roger,
I'm afraid that Group Managed Service Accounts are not supported by PRTG. We will look for new authentication ...
Tue, 10 Jun, 2025 at 3:36 PM
Currently we are using a virtual machine dedicated for PRTG.
Moving the virtual machine between different HyperVisors will generate activation problems on the product.
Basically what we want its a replica of the PRTG virtual machines betw...
Tue, 10 Jun, 2025 at 3:36 PM
How can i priorize an sensor if it is in idle state cause of license restriction?
This sensor schould always be monitored and other sensors schould become idle if the license will be exceeded.
Article Comments
Hello there,
Y...
Tue, 10 Jun, 2025 at 3:36 PM
Hi
I would love to have a Sensor to monitor the IBM v series storage platform, IO performance , throughput and health status.
Thanks
Article Comments
Hi Marco,
Please take a look at these two articles:
Topic 74535
To...
Tue, 10 Jun, 2025 at 3:36 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story and Details of User Story
As a PRTG User, I want to add groups...
Tue, 10 Jun, 2025 at 3:36 PM
Probe Device Probe Health (Probe Health) Down (200 % Delay (Interval Delay WMI) is above the error limit of 100 % Delay in Interval Delay WMI. How fix this problem, thx
Article Comments
Hello naab,
Please see this article for...
Tue, 10 Jun, 2025 at 3:36 PM
