kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Dear Support Team,
Hello
Suppose I currently have 200 down sensors in the PRTG. The downtime of these is 100 days. When the service restarts (sometimes manually, sometimes due to system overload or other problems), some of them are shown ...
Tue, 10 Jun, 2025 at 3:05 PM
Hi,
I have been trying to get the windows updates sensor working for windows servers. We are hosting several windows machines for customers that are NOT part of a domain.
Our PRTG server can connect to all those servers through a managemen...
Tue, 10 Jun, 2025 at 3:05 PM
Is there a way to create a custom report which will export which sensors are on specific servers selected for the report?
Article Comments
Hello,
Thank you for your message.
Regarding what you would like to achieve, I invite...
Tue, 10 Jun, 2025 at 3:05 PM
Hello,
We currently have a trial license for PRTG; we are in process of evaluating (we currently have a trial license). We are trying to add a custom sensor for Audiocodes sbc on PRTG. Initially we attempted to use the entire oidlib file...
Tue, 10 Jun, 2025 at 3:05 PM
Buenas nosotros contamos con 2 dispocitivos ups marca gamatronic, la misma no se puede monitorear con el sensor de ups estandar, ya que el archivo mib es bastante diferente, como puedo hacer para que me ayuden con un sensor para ups gamatro...
Tue, 10 Jun, 2025 at 3:05 PM
Hey all,
We are looking into automating device creation and are encountering some Template issues...
I have created a device ( Cisco Switch ) and we manually created snmp traffic sensors.
Then we can select all interfaces Gi1/1 -> Gi...
Tue, 10 Jun, 2025 at 3:05 PM
Hi!
We configured two custom performance counters for a dedicated software to monitore on the one hand the amount of licensed users and on the other hand the amount of logged in users (the license model is concurrent).
So it is possible...
Tue, 10 Jun, 2025 at 3:05 PM
Hi I'm trying to see if I can monitor a port but I don't see a "Port Sensor" anymore when I try and search it up on the available sensors? Was this renamed?
Article Comments
Hi there,
the Port Sensor is still...
Tue, 10 Jun, 2025 at 3:05 PM
I was wondering if there was a Sensor or a script, I could use to test if a FQDn resolves to a specific IP over an External defined DNS, so if it doesn't resolve to that IP anymore it's gonna give me a warning.
Example:
FQDN: pb...
Tue, 10 Jun, 2025 at 3:05 PM
Hi All, I'm New user to PRTG, evaluating the product to see if it can help us to find bandwidth on our WAN Links
Looking at the SNMP Traffic 64bit data coming from our Fortigate, how to read these graph If someone can point me to some ...
Tue, 10 Jun, 2025 at 3:04 PM
We are using PRTG to monitor our servers and I have received a request today for exporting email notifications sent by to export email notifications sent by PRTG to our IT Admin team from specific group of servers from a year back to today....
Tue, 10 Jun, 2025 at 3:04 PM
Hello,
We noticed that in Start menu on our Windows server the "PRTG Administration Tool" icon is missing.
It seems that our AV tool has deleted the .exe file, so now we can't get/start PRTG Administration Tool.
Is there a...
Tue, 10 Jun, 2025 at 3:04 PM
Hello guys
I am in the process of automating the PRTG alerting / maintenance window. We have created 23 groups as timeslots on our Active Directory for each day. These are called "Monday 00" for Monday 00:00; "Monday 02&quo...
Tue, 10 Jun, 2025 at 3:04 PM
Hi,
I'm trying to setup a LoRa-network for my thesis and I'm also trying to include PRTG.
Is there a way to connect PRTG to a LoRa-backend or a way to input and convert payloads from the LoRa-sensors?
Regards,
Pieter Hap
...
Tue, 10 Jun, 2025 at 3:04 PM
Customers want to be able to send messages in Syslog Receiver to SMS messages.
Is there a way to send PRTG syslog message to SMS? We are hoping to add this feature.
Article Comments
Hello Dorothea,
Thank you for your message...
Tue, 10 Jun, 2025 at 3:04 PM
Hello everybody,
On some of my servers (with SQL Server and/or Business Object installed on it), I'm unable to use the "LastWindowsUpdateSensor".
PSRemoting is enabled, I checked the SPNs and created the "5985" S...
Tue, 10 Jun, 2025 at 3:04 PM
Native sensors for Lenovo systems (server, switches) would be helpful since these devices are often used.
Article Comments
Hello Melanie.
Thank you for reaching us.
We are constantly looking to improve PRTG in order to meet o...
Tue, 10 Jun, 2025 at 3:04 PM
Is it possible export every notification setups through api with PRTG?
With csv. for example. And we will have data as list.
Like what we've mentioned above, we'd really like to know if it is possible.
Our customer is really appr...
Tue, 10 Jun, 2025 at 3:04 PM
I have a question about possibiility of generating SNMP get-next request by SNMP Custom Sensor. I'm monitoring HP P2000 G3 disk arrays and there is for example "unit status" parameter, which shows status of the device. I'v...
Tue, 10 Jun, 2025 at 3:04 PM
Hello
I need to monitoring the Cisco Unity, the OID used is 1.3.6.1.4.1.9.9.385.1.2.1 - ciscoUnityServerState, with another monitoring tool it is possible.
Use get-Net: disabled
Aessler SNMP tester - 20.2.4 Device name: SOUMIMOPRO1 In...
Tue, 10 Jun, 2025 at 3:04 PM
Also can we export the Auto-Discovery data through api? Thank you
Article Comments
Hello Dorothea,
Regarding the auto-discovery settings, I'm afraid that is it necessary to execute a call for each A-D setting of an object,...
Tue, 10 Jun, 2025 at 3:04 PM
I'm trying to read out Cisco IOS version and hardware model but it's failing also after upgrading PRTG network monitor to the latest version 14.2.10.2114+
I'm using the snmp custom sensor and OID value 1.3.6.1.2.1.1.1.0
The ...
Tue, 10 Jun, 2025 at 3:04 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to monitor the update status of Symante...
Tue, 10 Jun, 2025 at 3:04 PM
WMI sensors stop working. nothing has changed on network, with service account being used, or on the server where the WMI sensors WERE working. At random time, PRTG starts puking up "Connection could not be established (code: PE015)&...
Tue, 10 Jun, 2025 at 3:04 PM
We need to monitor a web API for a client of ours. To be able to connect to the API, a key is provided.
In this case, we are requesting a feature enhancement for the http API for this purpose.
Hoping to hear your response soon.
Thank...
Tue, 10 Jun, 2025 at 3:04 PM
I try to filter a String in the Event Message. The Filter includes 2 tab-stops (EventID: 4624, String in the Event Message: Logon Type: 3).
I enter the string step by step. After entering %Logon% - I have results, but not the rights. Af...
Tue, 10 Jun, 2025 at 3:04 PM
hi
i want to monitor a html div id. is there any way to do that?
example:
<div id="AP_Container">
thanks,
Article Comments
Hello,
Thank you for your message.
Regarding what you want to do, you can use...
Tue, 10 Jun, 2025 at 3:04 PM
I am trying to generate alerts for ports down/disconnected on a Fortigate Firewall. All my SNMP sensors are working and I can initiate a down state on the port that then reflects in PRTG. What I need to know is where is the global setting t...
Tue, 10 Jun, 2025 at 3:04 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
It would be nice if custom sensors could be easily added with ...
Tue, 10 Jun, 2025 at 3:04 PM
We've had problems in the past with Linux systems which have caused the systems file systems to go to read-only mode. I want to monitor and send an alarm when this happens again but can't find any sensor for PRTG that supports this....
Tue, 10 Jun, 2025 at 3:04 PM
Hello,
I have a problem with this sensor : MSExchange Store Interface: RPC Latency average (msec) _Total
When I open the performance counter on the server, there is no issue, I have this metric
But PRTG is telling me :
"The dat...
Tue, 10 Jun, 2025 at 3:04 PM
Hi,
How can i export source and destination ip from Top Talkers/Top Connections ?
In wich directory is saved daily logs?
Thank you
Article Comments
Hi there,
You can enable the option "Stream Data Handling" to ...
Tue, 10 Jun, 2025 at 3:04 PM
I have PRTG manager in my company. On every cisco device with ios 12 when i add syslog sensor everything is ok.
On cisco devices with ios 15 when I add sensor for syslog said ok but i dont have any msgs record on the prtg.
Any thoughts?
...
Tue, 10 Jun, 2025 at 3:04 PM
Hello,
I have 1 sensor with 30 channels.
I want to have a historicdata in json for 1 specific channel of this 30 channels.
Here the closest I get so far:
http://xyz-prt/api/historicdata.json?id=2490&channelid=6&avg=0&sdat...
Tue, 10 Jun, 2025 at 3:04 PM
Is there any way to bulk rename sensors using windows powershell or cmd?
Article Comments
Hello,
Thank you for your message.
To rename many sensors in PRTG, you can use the following API call :
/api/rename.htm?id=ObjectID&...
Tue, 10 Jun, 2025 at 3:04 PM
Hi
We have a docker swarm consisting of serveral nodes and need to monitor a stack (several services) which can be on any of the docker swarm nodes.
Using the REST Custom sensor as suggested [here](https://helpdesk.paessler.com/en/suppo...
Tue, 10 Jun, 2025 at 3:04 PM
Hii!! So, in a VM of Azure, in the "Internet protocol version 4 (TCP/IPv4) Properties" I change the checkbox of "Use the following DNS server addresses" TO "Obtain DNS server address automatically" and then I s...
Tue, 10 Jun, 2025 at 3:04 PM
I use custom text mail format in the notification with only %trapmessages.
It worked fine and the format was the following:
Bindings:
SNMPv2-MIB::snmpTrapOID.0 = SNMPv2-SMI::enterprises.27894.9.1.2.2
SNMPv2-SMI::enterprises.27894.9.1.2.3 ...
Tue, 10 Jun, 2025 at 3:04 PM
Dear Support Team
Hello
Is there any way to have a group with just "pause/resume" privilege?
I want the members of that group not to be able to delete or create any group or device or sensor and only be able to pause or resume ...
Tue, 10 Jun, 2025 at 3:04 PM
Hi,
I've a custom script sensor that fetch a variable numeric value provided every 5min by a third part system. If this system "hang" the numeric value will remain constant for a long time.
Is there a way to setup the PRT...
Tue, 10 Jun, 2025 at 3:04 PM
Hi
How can I create historic bandwidth / traffic report with Combined summarized sensors? For example for last week.
For example I have a switch with 48 interfaces and I have 1 sensor for each sensor. I need a report with some selected s...
Tue, 10 Jun, 2025 at 3:04 PM
Hi,
Since the new update (we haven't updated in 6 months) the color scheme have changed. Great but I would love to change the colors but I simply cannot do this. I have read countless of forums but they are all outdated.
I want to c...
Tue, 10 Jun, 2025 at 3:04 PM
How can I create monitoring objects in a circle format and status colors to use in creating maps.
https://helpdesk.paessler.com/en/support/solutions/articles/25613-how-to-create-a-custom-map-icon
Article Comments
Hello,
T...
Tue, 10 Jun, 2025 at 3:04 PM
Hi, I've a lot of server to monitor with different partition name and size. All I want is:
- Warning under 5 GB free space in partition
- Error under 2 GB
- I don't want to manually modify one by one every sensor/channel!
Is ...
Tue, 10 Jun, 2025 at 3:04 PM
Hello, I would like to know if my connector link of a group can be green in function of one sensor (especially the ping sensor because it's the ping sensor who's determinating if the link is up or down)
Thanks for your answers.
...
Tue, 10 Jun, 2025 at 3:04 PM
The IMAP probe does not detect mail with the following subject (in french) : "État OK".
Below is the log of the probe.
Additional information: the logs show that the probe correctly detects the object of other emails
Sensor LO...
Tue, 10 Jun, 2025 at 3:04 PM
Hello All,
As i'm looking at (i.e. Traffic Light) Mapobjects he see following in source:
<#sensor type="colorclassofstate" id="<@objectid>" var="status">
<#objectproperty type="...
Tue, 10 Jun, 2025 at 3:04 PM
Hi There,
I understand that the abiity to monitor registry entries is no longer part of the core PRTG system but it is still possible via EXE/Script and Paessler also provide a PowerShell script (if not officially supported anymore)
I ...
Tue, 10 Jun, 2025 at 3:03 PM
Using PRTG I would like to monitor the values of my Crypto Coins.
How can this be done?
Article Comments
This is possible with the new free 'CryptoValueXML' Custom Sensor from PRTG Tools Family.
The sensor req...
Tue, 10 Jun, 2025 at 3:03 PM
Hi,
Is there a way to set the default limit for the WMI Memory sensors to specific values?
IE, the default warns at 30% remaining free.
We only want to be alerted at 3% remaining free and have to edit for every server we add.
Can we set...
Tue, 10 Jun, 2025 at 3:03 PM
Trying to figure out where I can define/replace some colors.
For the traffic light it was pretty easy as the color was defined in hex right in the map object file.
I'm now trying to do status donut with dark text. It has an include ...
Tue, 10 Jun, 2025 at 3:03 PM
Hello Team,
I want create Ping Sensor to monitoring the single Ping lost.
With the standard Ping sensor configuration I receive a "down" state only after 5 ping. My scope is to have a grafical view of a CMD Ping command, I'd l...
Tue, 10 Jun, 2025 at 3:03 PM
Hi,
We install a new PRTG (1000 sensors) using our existing config (version17, 1000 sensors). The admin of the new license and old license is different. We need to create a user account in the new PRTG with the same username and password ...
Tue, 10 Jun, 2025 at 3:03 PM
Hello,
I'm trying to setup the "Microsoft 365 Advanced Status" sensor on my PRTG setup, but I got this error message :
The sensor could not connect to the server. Connection failed: ChilkatLog: Connect_Socket: ChilkatVersi...
Tue, 10 Jun, 2025 at 3:03 PM
Hi, one of my colleagues is color blind. The default colors of yellow and green look almost exactly the same to him, if not the same. He is unable to "see" or decide which is the green or which is the yellow.
Using https://helpdes...
Tue, 10 Jun, 2025 at 3:03 PM
I have a sensor factory that is meant to add 2 sets of pages printed values to give me the total. Whenever I set the channel it will only show one of the values
#1:Black Pages printed
( channel (17555,0) + channel (17553,0) )
A...
Tue, 10 Jun, 2025 at 3:03 PM
i am trying to setting Oracle sensor v2 sql but failed with error user/password invalid.
i try to change user /password but can't find any filed for it. only service appear.
Please advise.
Article Comments
Hello,
You c...
Tue, 10 Jun, 2025 at 3:03 PM
I've set my LDAP and groups correctly following this link:
https://meca-monitor.me.local/help/active_directory_integration.htm
However, I'm not able to see the status of the sync or even see the new members of the group in my ...
Tue, 10 Jun, 2025 at 3:03 PM
Hello,
follow challenge i have to solve.
We have on a server 3 certifcates activ, 2 selfsigned and 1 public trusted.
the sefsigned has CN & SNI name like "server1.domain.com" & "server2.domain.com"
the publ...
Tue, 10 Jun, 2025 at 3:03 PM
Hi!
I need the total devices with its IPs of my PRTG, can you help me?
Device Name IP
Article Comments
Hello Juan,
Thank you for your message.
To generate a list of your devices with their IP address I invite you to u...
Tue, 10 Jun, 2025 at 3:03 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
I would like to have the possibility, for individual groups, d...
Tue, 10 Jun, 2025 at 3:03 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want the ability to have sensors use a proxy ...
Tue, 10 Jun, 2025 at 3:03 PM
Hello, we have developed an application,
that parses and evaluates the REST API XML.
Recently, the PRTG server refuses the connection of the PHP server.
Where can I enter the IP of the server so that the application
work again?
PRTG ver...
Tue, 10 Jun, 2025 at 3:03 PM
In order to use IBM flashsytem REST API I need to use username and password to get a token and then use the token for following requests
curl -k -X POST -H 'Content-Type:application/json' -H 'X-Auth-Username:prtgapi' -H &#...
Tue, 10 Jun, 2025 at 3:03 PM
I'm using a syslog sensor.
On 'Mesages' tab of the syslog sensor, how do I extract or export the entire contents collected into a file?
And only up to 1000 times are displayed on that tab?
To check the original raw data of t...
Tue, 10 Jun, 2025 at 3:03 PM
Should PRTG Installer be run only under an administrator account?
Which privileges are required when installing with an AD account?
Can I run the Installer by changing the default installation path : "C:\Program Files (x86)\PRTG Netw...
Tue, 10 Jun, 2025 at 3:03 PM
I have an question about a purge option of syslog sensor.
I can specify a value in the Sensor settings: 'Syslog Specific' -> 'Purge Messages After'.
Does purge work only by this setting?
Does this value work independ...
Tue, 10 Jun, 2025 at 3:03 PM
Hello everybody,
I have added an IMAP sensor and can monitor incoming emails from a specific sender with a specific term.
But I don't get an email through PRTG when an email comes from the specific sender. I only get warning on web in...
Tue, 10 Jun, 2025 at 3:03 PM
I have a PRTG working as Master and Failover. Both the PRTG nodes are operational in 2 separate locations.
Both the PRTG have access to Internet, but PRTG nodes(Master and Failover) are not connected through Internet, rather through a dedic...
Tue, 10 Jun, 2025 at 3:03 PM
Hello,
I return the following JSON:
{"Prtg":{"Text":"There are some problems","Result":[{"Channel":"Cameras Errors","Value":4,"LimitMode":1,"LimitMaxEr...
Tue, 10 Jun, 2025 at 3:03 PM
PRTG can send notifications but it does not track these notifications to make sure that team members who are responsible and on call receive and resolve them in time. Is it therefore possible to integrate AlertOps into PRTG? What steps do I...
Tue, 10 Jun, 2025 at 3:03 PM
In the PRTG apps for iOS and Android, PRTG can show alerts and whether they are acknowledged or not. However, you cannot see your team members who are on call in case you get, for example, a critical alert and you are no expert on the matte...
Tue, 10 Jun, 2025 at 3:03 PM
Hi all,
I've been writing a lot of custom scripts to be used with PRTG in the past years. Most of these were written in Powershell. A few months ago, I started playing with Python scripts in PRTG and I noticed there's a CustomSen...
Tue, 10 Jun, 2025 at 3:03 PM
I found
https://helpdesk.paessler.com/en/support/solutions/articles/9973-how-to-correctly-monitor-linux-real-memory-usage
which looks like it would solve my problem if I was running PRTG on a linux box but my PRTG is monitoring from Windo...
Tue, 10 Jun, 2025 at 3:03 PM
Does port sensor check both TCP status, 'LISTEN' and 'ESTABLISHED'?
Is it correct to check OPEN status of the port using the telnet protocol?
I am using a port sensor, which checks port 34506.
In PRTG, it has error mess...
Tue, 10 Jun, 2025 at 3:03 PM
Hi Forum,
I have the below written script that I would like to return values on PRTG, I can successfully display some values, however some don't display because they are not integers I guess.
#!/bin/bash
app_name="ListenerSer...
Tue, 10 Jun, 2025 at 3:03 PM
Hey guys.
I would like help. I have an API where I want to collect the status. Contacting the return is a string, I am using the lookup but it is giving the error:
Could no evaluate channel value of Status: expected type string for paramete...
Tue, 10 Jun, 2025 at 3:03 PM
We have our syslog sensors configured to include all severity levels (0-6) and would like to keep it set that way but it creates a lot of warnings and we would like to be able to acknowledge the repeat warnings for a period of time (ex: 1 d...
Tue, 10 Jun, 2025 at 3:03 PM
Good day!
I'm trying to configure SNMP for the QNAP Health sensor in PRTG, and though it looks fine on the NAS' side, and in PRTG too, I get the "No such instance, error 223" issue.
If I use the SNMP tester I get this...
Tue, 10 Jun, 2025 at 3:03 PM
I'd like to see support for 64 bit lookup values implemented. The docs state that SingleInt and Range are restricted to 32-bit (but it does not inform if it's signed or unsigned values. This should be clarified as well, to be honest...
Tue, 10 Jun, 2025 at 3:03 PM
Hi,
is there a way to send notification when a sensor is reactivated but only if are still down after resume?
We don’t need to know if a sensor goes down and than up during the paused time but only if wen reactivated, is still down.
Thank...
Tue, 10 Jun, 2025 at 3:03 PM
Hi!
I created a library about only disk free in PRTG. And I would like to show as list only disk free information, but I didn't see custom map object tools in Map.
How to create custom map object for take library information. Could you...
Tue, 10 Jun, 2025 at 3:03 PM
Hello team, I need a KB or manual with a description about multitenant and multibrands features about PRTG.
Article Comments
Hello Jalva,
Thank you for your message.
Regarding your request, I invite you to have a look at our...
Tue, 10 Jun, 2025 at 3:03 PM
has anyone got the 365 to work? I tried in two different environments and not having any luck.
if i try the advanced sensor i get an error that it already existing. (doesn't)
if i try the regular sensor i get an error "invalid_re...
Tue, 10 Jun, 2025 at 3:03 PM
A mqtt broker supply a timestamp to each value. Is PRTG able to fetch past data from the MQTT broker ? F.ex. if the connection to the MQTT broker has been down for some time, will PRTG then fetch all data queued at the MQTT broker when the ...
Tue, 10 Jun, 2025 at 3:02 PM
Hello,
I am trying to add a new sensor to PRTG to monitor zscaler server.
I have copied the MIB file to PRTG managed server and configured SNMP to load the file.
When i run a SNMP tester in PRTG I get the below error:
------------...
Tue, 10 Jun, 2025 at 3:02 PM
The NMS have different areas of administration: Security, configuration, accounting and faults, how does the PRGT help in the accounting area?
Article Comments
Hello,
Thank you for your post.
Can you please describe your inq...
Tue, 10 Jun, 2025 at 3:02 PM
Hi,
I would like to suggest adding new placeholders to EXE/XML sensors parameters.
We are using the sensor to read other data from VMWARE (vCenter) and we don't want to write the credentials in the script or settings, because they ar...
Tue, 10 Jun, 2025 at 3:02 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to see the previous day'...
Tue, 10 Jun, 2025 at 3:02 PM
I can run test from my server by PRTG tester and it's working normal, but when i create sensor on portal by SNMP traffic, it's failed. can reach to my server. Please help.
Article Comments
Hello there,
For request like...
Tue, 10 Jun, 2025 at 3:02 PM
Hallo und guten Tag,
ich möchte einen Webseite auslesen ob z.b. im Quellcode folgender Inhalt vorhanden ist
<title>Login | Scannel Backend</title>
Hintergrund ist, das es immer wieder vorkommt das durch ein Programmiefeh...
Tue, 10 Jun, 2025 at 3:02 PM
So we have setup groups by site and I want to pause all devices in the group if the ping of firewall goes down. The firewall is within the same group. When I try to setup by the group I am unable to select that device
Article Commen...
Tue, 10 Jun, 2025 at 3:02 PM
I'm looking into how I can run a programmatic report on which sensors/channels don't have limits set up. We have 16,000+ sensors, so it has to be programmatic. I planned on using the API but it seems to have a major flaw. Some of th...
Tue, 10 Jun, 2025 at 3:02 PM
it only shows the options to choose between displaying the channel in megabytes or percentage.
Article Comments
You can change this in the device or sensor settings under Channel Unit Configuration at the bottom.
Jun, 2021 - ...
Tue, 10 Jun, 2025 at 3:02 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread
Read Me!)
How can PRTG integrate with Mimecast's RESTful API?
We've migrat...
Tue, 10 Jun, 2025 at 3:02 PM
Hello,
I am using PRTG to monitor SNMP data and WMI services on windows servers.
I have never changed the settings (i.e. there is no credential problem.), but suddenly the WMI service is not being monitored for about 3 days. There are ...
Tue, 10 Jun, 2025 at 3:02 PM
I am trying to generate a report which contains the readings of sensor (message), but i only am able to see the downtime time or response time logs.
The sensor type is a snmp custom string.
Article Comments
Hello,
There is ...
Tue, 10 Jun, 2025 at 3:02 PM
I'm running PRTG version 18.3.44.2059. I have upgraded my vCenter from version 6.5x to 7.0.0d and subsequently the majority of "esxservervmserver" sensors stopped working with error message "Input string was not in a corr...
Tue, 10 Jun, 2025 at 3:02 PM
I was wondering if it was possible to monitor the GPU usage of our NVIDIA M10 Grid card. So I've been testing and finally came up with this working solution!
In our VMWARE Servers we have NVIDIA M10 Grid cards installed. All these car...
Tue, 10 Jun, 2025 at 3:02 PM
Hey I'm using nvsmi to get the gpu utilization on my clientmachine.
I created a .bat script with following code and added it via Advanced EXE/XML Sensor
@echo off
echo ^<?xml version="1.0" encoding="Windows-1252"...
Tue, 10 Jun, 2025 at 3:02 PM
