kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Ich habe einen Kunden der stört sich an der Mouse over Funktion, dass immer Meldungen erscheinen wenn er mit der Maus auf den dem Gerät oder Sensor steht. Lässt sich diese Funktion abschalten?
Article Comments
Hallo,
in der akt...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
I have a couple of questions:
1. When I create new map and insert Geo Maps into it to be able to visualize al my access points, along with the map it includes a list of all my Access-points with coordinates, how can I cut it?
htt...
Tue, 10 Jun, 2025 at 1:57 PM
Hi
I'm new to PRTG
Just installed the product, and it found about 80 windows servers.....
OK - but because of the default diskfree sensor (multi- disk) is used, I get a lot of alerts/notifications on my disks.
Because some of the dr...
Tue, 10 Jun, 2025 at 1:57 PM
How can i compile mib files in my project.
How can i write a sample mib.
Article Comments
You can import MIB files for usage with PRTG using our MIB Importer.
As for writing MIBs, you will find detailed information (including ...
Tue, 10 Jun, 2025 at 1:57 PM
I want to disable all the links and popups in (public) available maps, because the map will be visible for everyone on the internet. Right now a hover over a sensor-tree brings up a popup with some options (clicking on them brings you to th...
Tue, 10 Jun, 2025 at 1:57 PM
Good afternoon,
Does PRTG current support a way to report the latency and change over time of a trace route's hops with a single sensor? I'm looking for something along the lines of pingplotter. Any information would be helpful.
...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
I would like to know why some definitions (display in option when configuring sensor channel) for certain channels (broadcast in/out, unicast in/out) are shown in #/s format. Could you please tell me what is this?
I would need to...
Tue, 10 Jun, 2025 at 1:57 PM
I have a sensor that is showing UP when the connection / circuit is actually down. I am not getting an alert or indication showing down. The configuration is inherited from the parent group. All other sensors in that group do show down.
An...
Tue, 10 Jun, 2025 at 1:57 PM
Hi,
I am new to SNMP, I have read information from google.But i have following questions.Please answer the below questions.
1.What are the testcases for snmp.
2.How to compile Mib files in snmp.
3.How can i add new mib in snmp.
...
Tue, 10 Jun, 2025 at 1:57 PM
Hi,
Sorry if this has been covered previously but I wasn't able to find an existing question covering this.
We have an SQL Query-based Sensor looking at a logging table for an in-house application. We have configured this sensor so...
Tue, 10 Jun, 2025 at 1:57 PM
How Can I view daily and to-date usage totals
Article Comments
If you want these totals each day, you could set up a report to be sent out each day for the previous day's totals. You can also view this information in graph...
Tue, 10 Jun, 2025 at 1:57 PM
I'm using PRTG 13.4.7.3706 to monitor the PLC of some production equipment. The output is run time and production count. The PLC is setup such that I'm polling different OID's for values for Shift 1, Shift 2, and Shift 3 (via ...
Tue, 10 Jun, 2025 at 1:57 PM
I want to disable monitoring while the remote probes are restarting their service on the first of each month. How can I do this?
Article Comments
Hello,
thank you very much for your KB-Post. Actually, if a Probe is disconnecte...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
I am having some issues with the PRTG snmp traffic sensor, since it is adding interfaces that do not exist
http://www.freeimagehosting.net/qjkzh
The giga0/3 does not exist in the device but it is showing "connected" in PR...
Tue, 10 Jun, 2025 at 1:57 PM
Hi All,
i have installed a probe in my remote company and now i need to monitor all AP (600 about).
If possible monitoring it directly from my Cisco Flex 7500 Series Wireless Controllers and not add all manually
I need to monitor only UP/Do...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
I've created a sensor based on the "Event Log (Windows API) sensor" which checks every 6 hours the application log for specific ids. Now I would be notified when such id is found in the last 6 hours. Therefore I confi...
Tue, 10 Jun, 2025 at 1:57 PM
Hey,
Is there a way to create a script that you can insert ( in the script code or with a GUI ) the segment you want to auto-discover and it will create the following:
1. Create a new Group in the PRTG console
2. Discover all the devices...
Tue, 10 Jun, 2025 at 1:57 PM
I have enabled limits on an ESXi SSH disk sensor. The lower warning limit is 20%, the lower error limit is 10%. Even though these limits are enabled on the "Free space" sensor, it still returns a warning of:
"22 % (Free Spa...
Tue, 10 Jun, 2025 at 1:57 PM
Hi,
I am new to PRTG and am trying to get rolling with it. I am using the Linux SSH Disk sensor which puts all the file systems under one sensor. The global limits are at lower than 25% for warning and 10% for error. I have one file syste...
Tue, 10 Jun, 2025 at 1:57 PM
Can you provide me the step-by-step to monitor Monitor Domino 8 email queue. That is when the email queue is over n quantity, send and alert.
Article Comments
Hello,
thank you very much for your KB-Post. Unfortunately, we do n...
Tue, 10 Jun, 2025 at 1:57 PM
Dear PRTG Community
We have copied the following WMI Script to the folder of PRTG (Program Files (x86)\PRTG Network Monitor\Custom Sensors\WMI WQL scripts\):
select name, Orchestrationstatus from MSBTS_Orchestration where name ='Orc...
Tue, 10 Jun, 2025 at 1:57 PM
I have a Windows Server 2008 R2 Hyper-V cluster with 3 hosts. In the cluster I have 3 Hyper-V Cluster Shared Volumes (CSV). I need to monitor available disk space on these volumes.
Any of the hosts can own any of the CSV's, so I am un...
Tue, 10 Jun, 2025 at 1:57 PM
Dear PAESSLER,
I am using Enterprise Unlimited Edition for monitoring my network devices. When I first installed PRTG, every thing went fine and I was performing my job very well.
But,
One day I needed to format my Monitoring Server. ...
Tue, 10 Jun, 2025 at 1:57 PM
Hi I have installed PRTG8 and no matter what I do I get error 10061 connection refused.
I have set the IP to the static in the PC 10.0.12.253, I have tried to change from ssl port 443 to port 80 and that did not work!
I have followed the ...
Tue, 10 Jun, 2025 at 1:57 PM
we need to monitor VPN Tunnels in Cisco ASA 5550 OS 8.2. in PRTG we can see the Interface but VPN Tunnels not showing.
how to monitor VPN Tunnels and distinguish between them.
Article Comments
As far as I know, you must import...
Tue, 10 Jun, 2025 at 1:57 PM
We are running SQL 2008 R2 and would like to monitor the audit log of the SQL server. Can PRTG do that?
Article Comments
Have you checked this other article about how to monitor the logins?
Jan, 2014 - Permalink
Thanks....
Tue, 10 Jun, 2025 at 1:57 PM
(NB: This is a repeat, i can't be sure if my question yesterday occurred, i understand these are moderated but normally this happens during their work day, i am GMT+11)
Hi
I need to gate the trigger logic for monitoring backup archi...
Tue, 10 Jun, 2025 at 1:57 PM
Hi
I have set a schedule for a specific time, e.g. 5am as our backups run at 1am and finish around 2 am.
I am after a one off check each day that the file has had a TLM change.
>> Scanning Interval - I have set this to 24 hours ...
Tue, 10 Jun, 2025 at 1:57 PM
Hello team,
I was looking for a possibility to define a more flexible user in terms of permissions.
I need to create a read-only user, but allow it to run reports. Is there a way to do this?
It is a bit poor regarding user creation proces...
Tue, 10 Jun, 2025 at 1:57 PM
when i clone a sensor for some reason it's cloning the notifications for that sensor. However when you go to the cloned sensor you do not see any notifications.
now i have sensors that are going off even though they have nothing setu...
Tue, 10 Jun, 2025 at 1:57 PM
I installed snmp but when I try to dd snmp sensor:
with snmp v1:
(SNMP error # 2)
with snmp v2c:
(SNMP error # 222)
Am I missing something ?
Article Comments
Hello,
You can use our SNMP Tester to check/debug the SNMP commu...
Tue, 10 Jun, 2025 at 1:57 PM
I want to know that my network link work properly. Maybe you have other suggestions.
Article Comments
Hello,
have you checked the "Additional Channels" on the SNMP Traffic Sensors? Maybe this does already help. Other...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
After I edited the SNMP traffic sensor channel (whether it is a traffic sum or IN/OUT) the sensor circle displays some weird very long percentage number, instead of displaying 84%
Can you tell me, why the visualization works like...
Tue, 10 Jun, 2025 at 1:57 PM
Hello,
My local probe has just started to continuously disconnect. I am currently running a trial version pending full purchase within a week. In fact I just had a meeting regarding this new monitoring solution with my COO and was adding ...
Tue, 10 Jun, 2025 at 1:57 PM
I have created OIDLIB files using Paessler MIB Importer V3 and dropped them into the:
(c$\Program Files (x86)\PRTG Network Monitor\snmplibs) directory. Next I try to add the new sensors and the software doesnt pickup the sensors from the OI...
Tue, 10 Jun, 2025 at 1:57 PM
I have noticed that with WMI sensors, in this case a WMI disk space sensor, that the sensor display changes according to the lower warning limit and lower error limit defined in the sensor settings. If the value is less than the lower warni...
Tue, 10 Jun, 2025 at 1:57 PM
Im on PRTG Network Monitor 13.4.7.3748 and IE9,10,... users get the "browsers not supported " error. Please help.
P.S. I cant comment on other posts for this site, just see the log in or register.
Article Comments
...
Tue, 10 Jun, 2025 at 1:57 PM
We are monitoring some hardware that as you add customers... it adds interfaces to monitor. A few of them are getting to the point that they have 3k+ interfaces. We use the SNMP/Bandwidth Monitor sensor to monitor the bandwidth and availabi...
Tue, 10 Jun, 2025 at 1:56 PM
my message displays like the subject below with
TEST: [PRTG Network Monitor (CBA-PRTG)] %device %name %status %down (%message)
Article Comments
Hello,
thank you very much for your KB-Post. I'm afraid, the issue is not c...
Tue, 10 Jun, 2025 at 1:56 PM
Hello team,
I have a question.
Is there a possibility to create a report to include only the interfaces that reached lets say 60% of its utilization (defined in the channel settings percentage option)
Lets say, I come in the morning a...
Tue, 10 Jun, 2025 at 1:56 PM
Hi team,
after the updated to the latest prtg 13 version ,i am getting this issue on one particular server. it's my printer server. I have installed the version 4.0 and reboot the server but still the issue remains
Please help me to...
Tue, 10 Jun, 2025 at 1:56 PM
I only want the bandwidth sensors listed for those specific sub-interfaces. Just those ten individual sensors should appear.
I have setup a user and want this user to be able to view specific sensors (view only)
U: TECPRTG
I read t...
Tue, 10 Jun, 2025 at 1:56 PM
I am using Windows Network Card sensor to monitor NICs. I found PRTG allways show "down" status for NIC WMI sensor for some servers while large network traffic. Actually, the traffic is just 1/3 of max. of NIC's full load. How...
Tue, 10 Jun, 2025 at 1:56 PM
Hello,
how can I have a sensor that sums a specific channel during a certain period?
I want to sum the monthly bandwidth usage on one of my firewalls.
currently I have traffic graphs.
thanks
Article Comments
Hello,
than...
Tue, 10 Jun, 2025 at 1:56 PM
Hi, I've just downloaded the latest Trial PRTG and so far im vrery pleased.
its scanned my devices and been great with most. though i have some CentOS machines which it has been erroring when creating SNMP Sensors
I get "End of M...
Tue, 10 Jun, 2025 at 1:56 PM
Hi there,
We have been configured a lot of IMAP sensors, attacking against a mailbox, and retrieving information about subject, content, etc.
But there's one node where IMAP sensors are reporting a weird messages:
02/01/2014 8:1...
Tue, 10 Jun, 2025 at 1:56 PM
I seen the KB on how to edit a template but didn't see how to change it to report on discards
https://www.paessler.com/knowledgebase/en/topic/263-how-do-i-modify-prtg-s-report-templates
Article Comments
Depending on what r...
Tue, 10 Jun, 2025 at 1:56 PM
Hi,
Probe is a windows machine but I having trouble getting CPU and RAM monitoring to work the MAC OSX machines.
I followed this to try and enable SNMP: https://kb.paessler.com/knowledgebase/en/topic/41843-how-do-i-activate-snmp-on-mac-...
Tue, 10 Jun, 2025 at 1:56 PM
hello. i cannot monitoring SYNOLOGY ds413g. i have SYNOLOGY-UPS-MIB.mib and encoding in oidlib without err. but when i add new sensor, PRTG said me "No available interfaces on this device (code: PE049)"
Tester oidlib:
---------...
Tue, 10 Jun, 2025 at 1:56 PM
I want to create custom fields at a device, so I can register static data such as department, purchase date, warranty information, and other relevant information for us.
Is that possible?
Article Comments
Hello,
thank you ve...
Tue, 10 Jun, 2025 at 1:56 PM
We monitorize a lot of ARCServe D2D status (copy, fusion,etc) with one mailbox where all the mails goes to.
In past weeks, the sensor worked great, but right now, all of them are down with error "login failed".
This is very weir...
Tue, 10 Jun, 2025 at 1:56 PM
When i want to add SSH custom sensor,
a new script in /var/prtg/scripts/ on AIX server.
a got this error :
ls: illegal option -- M
it worked on previous version.
thanks
Article Comments
Which version of the software are y...
Tue, 10 Jun, 2025 at 1:56 PM
How can I increase the amount of time between repeat notifications?
I am receiving an email notification multiple times per day for the same alarm.
Article Comments
Hello,
thank you very much for your KB-Post. Can you please p...
Tue, 10 Jun, 2025 at 1:56 PM
Hey guys,
I want to monitor a log file of an application. The application writes an continues log.
I tried to use the file content sensor, but it will always stay on "warning", because the log won't change the occurrence o...
Tue, 10 Jun, 2025 at 1:56 PM
Hallo,
wir nutzen sehr oft die Automatische Suche. Die Sensoren die anschließend angelegt werden, haben aber leider immer eine 1 im Namen - z.B. "PING 1" ; "Laufwerk 1"
An was liegt das?
Article Comments
...
Tue, 10 Jun, 2025 at 1:56 PM
Hello, I would like to create website group, in which will be more HTTP sensors monitoring web pages. I need to monitor company Internet connection - when one page is down doesn't mean, the Internet is down.
Is there any way, how to cre...
Tue, 10 Jun, 2025 at 1:56 PM
Hi, is there a way to only alert (email, sms, etc.) the sys admins only if 10% or more of a group of sensors is down?
Specifically we would like to monitor a pool of 40 Citrix servers. We would like to receive an email only if 4 (10%) or...
Tue, 10 Jun, 2025 at 1:56 PM
Hello,
I have problem with auto-discovery. On every run it founds and creates sensors for interfaces that are already discovered, nut not for all switch ports just for few of them. Last run it duplicated 5 sensors on 96 port switch. All o...
Tue, 10 Jun, 2025 at 1:56 PM
I'm trying to monitor/graph the Servercheck temperature sensors and am facing several problems. I've imported the MIB, but when I try to use the SNMP Library sensor, it fails, stating that it can't reach the IP (which it can as ...
Tue, 10 Jun, 2025 at 1:56 PM
With RDP 8 and Remote FX this protocol now uses both TCP 3389 and UDP 3389 on the standard graphs etc it has RDP. Could you please advise if this RDP is both the TCP and UDP 3389 data or just the TCP 3389.
Thanks
Article Comments ...
Tue, 10 Jun, 2025 at 1:56 PM
Hi Guys,
Is there a way of moving a sensor in PRTG within the same device?
So the new created sensor won't be listed as a last one but somewhere in the middle for example?
Thanks,
Dom
Article Comments
Hi,
you can re-...
Tue, 10 Jun, 2025 at 1:56 PM
Hi,
Alost every time after server restart, one of my specific ping sensor goes mad.
Before restart it shows acceptable values like 0..10ms but sometimes, after I restarted the server hosting PRTG, this ping sensor shows values like 60...1...
Tue, 10 Jun, 2025 at 1:56 PM
My question is:
Does the user that i use for windows credentials must be member of administrators group?
Article Comments
Afraid so - this is a limitation of the WMI component. We stumbled across the following link recently,as r...
Tue, 10 Jun, 2025 at 1:56 PM
Is there a way to scan for new switches or routers and receive notification of those types of device
We would like to scan a large network to find out if and when an end user plugs in a home switch or router in to a Cisco switch and receive notification of those types of devices when discovered.
Article Comments
You could run a...
Tue, 10 Jun, 2025 at 1:56 PM
I'm trying to send an alert if the resulting value of a SQL query doesn't change for a set amount of time. Is there a way to do this in PRTG's notifications?
Thanks
Article Comments
The only way you would be able to ...
Tue, 10 Jun, 2025 at 1:56 PM
Hello,
at the very beginning when I'm using the guru I configured 2 websites to be monitored.
Nohting special just www.alternate.de and www.google.de (I think its a normal http sensor)
But I'm getting the error msg as mentioned ...
Tue, 10 Jun, 2025 at 1:56 PM
Hi all,
in the past it happened that sometimes a sensor (not PRTG what i am evaluating right now, different products) did not return the expected values or no value at all. Mostly snmp queries, wql things and so on... in those cases it wo...
Tue, 10 Jun, 2025 at 1:56 PM
just curious these sensor types.
Article Comments
Hi,
as you are asking this question, it seems you have found an Easter egg in the software. These sensors have no purpose, they are just green as the name says. :D
See also thi...
Tue, 10 Jun, 2025 at 1:56 PM
Hi,
i wanted to create a group that is autmatically filled with ad-users. I created the group, but when i open it, no users are inside.
I checked:
- The Server is a 2003 R2 and it is a member of your domain.
- under systemmanagement i s...
Tue, 10 Jun, 2025 at 1:56 PM
Hi all,
yes, i found the article "How can i use the trap receiver" and also some others. But i didnt get the right feeling if its possible to have 1 trap receiver for 1 specific event but for multiple sender. In detail as an examp...
Tue, 10 Jun, 2025 at 1:56 PM
Hi Paessler, it would be very helpful, if newly created sensors would not just be named with a trailing sequential number, but with the hostname after the sensor's name (and the maybe a trailing number if more then one).
e.g. PING %S...
Tue, 10 Jun, 2025 at 1:56 PM
Hi,
Both my Monitoring database (in Server Administration Tool) and the Probe data storage (in Probe administration tool) are set to "C:\ProgramData\Paessler\PRTG Network Monitor\". However, found another folder under "C:\U...
Tue, 10 Jun, 2025 at 1:56 PM
How i can get Toplist for a range of dates? I cannot find it.
Article Comments
If you click on the toplist in the overview interface of the sensor, you can select a toplist period to view. Specific date ranges are not available...
Tue, 10 Jun, 2025 at 1:56 PM
In our deployment of PRTG (13.3.5.2871 x64 on Windows Server 2012 R2), we use an AD-authenticated user to query WMI sensors. This causes pretty high lsass.exe CPU usage on the probe machines, but more concerning is that it generates severa...
Tue, 10 Jun, 2025 at 1:56 PM
I have a map using the Live Graph for Groups/Devices to graph a server's CPU Load.
For servers with multiple CPUs this can get a bit messy.
Is it possible to only graph the total CPU?
For reports your able to uncheck unwanted channel...
Tue, 10 Jun, 2025 at 1:56 PM
I have created a device with some sensors. Than I saved it as a template. Now I want to use this template on another device (different customer --> different domain). When I create another device, I choose the saved template. But the onl...
Tue, 10 Jun, 2025 at 1:56 PM
Hello,
I wrote an custom sensor in C#. I want to create and alert, so I wrote the following statement:
Console.Write(Convert.ToInt64(3)+":" + failLocation);
This fairly works, except that the status bar in prtg is still gree...
Tue, 10 Jun, 2025 at 1:56 PM
I use the Maps Editor (Designer) to create a map. I want to add an object which contains a log table. How can I create a map object of the log table such that I can add it to my map?
Article Comments
This article applies to PRTG...
Tue, 10 Jun, 2025 at 1:55 PM
I've been testing PRTG as a packet sniffer and one challenge I'm facing is how to actually view the captured packets. As it stands, all I can see is a pretty graph, but I can't see any relevant information like any clients respo...
Tue, 10 Jun, 2025 at 1:55 PM
Für das Arbeiten mit tickets habe ich eine neue Benutzergruppe erstellt, den "Zugriff auf das Ticketsystem" habe ich aktiviert. Die Grupper beinhaltet vorerst einen (neu erstellten) Benutzer, auch hier habe ich "Tickets als E...
Tue, 10 Jun, 2025 at 1:55 PM
We are trying to use SNMP probe to monitor our Alcatel 6850 switch.
When we add a snmp trafic probe, the configuration page (stage 2/2) list the port with useful informations : state, max speed, type, ...
As the probe function is to monito...
Tue, 10 Jun, 2025 at 1:55 PM
I would like to clean up some of the tags that were automatically created when we set up our system (ie."diskspacesensor") as I would never reference that tag and it always shows up in menus, cluttering them up. How do I remove t...
Tue, 10 Jun, 2025 at 1:55 PM
Hi,
How can I change the refresh interval for the local probe or a group below e.g. websites?
Currently it's showing me the default interval of 60 seconds, but I cannot see where to change this.
Thanks
Article Comments
...
Tue, 10 Jun, 2025 at 1:55 PM
Occasionally some of my sensors through an error message that says "The Errormessage could not be transfered properly."
The most recent message was on a CPU Load sensor against a Windows Server 2008 R2 machine.
There is also a...
Tue, 10 Jun, 2025 at 1:55 PM
Hi,
I would like to start over with PRTG, and wipe all the historical data. Is there a way to do that, or do I need to reinstall?
Thanks
Article Comments
Hi,
to wipe all historic data, just stop your PRTG services (Core and...
Tue, 10 Jun, 2025 at 1:55 PM
Is there a way to add a link to a given alert that can redirect a user to a runbook type document ? so on a given alert we can show a link that will take us to our documentation explaining our resolution process.
Article Comments
...
Tue, 10 Jun, 2025 at 1:55 PM
Hi,
Is it possible to update this KB :
https://www.paessler.com/knowledgebase/en/topic/29943-how-can-i-hide-the-2-days-30-days-and-365-days-graphs-on-the-group-pages
with the version 14.* because the modification of the file styles_cu...
Tue, 10 Jun, 2025 at 1:55 PM
I have done the configuration regarding the alerts to my Gmail account. but i cannot get the alerts when the sensors are down.
Article Comments
Did you add state triggers to the corresponding objects, so that notifications are ...
Tue, 10 Jun, 2025 at 1:55 PM
Hello,
I have Oracle RAC Cluster and I'm trying to query it using PRTG.
I would like to test connectivity to the Oracle database using PRTG Oracle SQL Sensor.
The SQL Expression: select count(*) from sys.v_$session.
The Connection mode:...
Tue, 10 Jun, 2025 at 1:55 PM
Playing around with the new "Ticket" feature I found that
1. typing a ">" character in the text input field will give me a "}" in the ticket.
2. The " (quotation mark) character doesn't show up in...
Tue, 10 Jun, 2025 at 1:55 PM
can I configure PRTG to call a landline phone and read the alert.
Article Comments
PRTG can send alerts via SMS messages.
If you enter a landline phone number it is up to the provider if it can switch to text to speech.
Most...
Tue, 10 Jun, 2025 at 1:55 PM
Hi,
I've added McAfee antivirus sensors for all our desktops. The status of all sensors McAfee Host Intrusion Prevention Firewall (Firewall) are "McAfee Host Intrusion Prevention Firewall out of date, on access scan running"...
Tue, 10 Jun, 2025 at 1:55 PM
Hello team,
I asked this question about a week ago, because the percentage calculation in SNMP traffic sensor for Traffic In and Out channel is not working well.
I was advices to upgrade PRTG, since then I upgraded it twice, the last ti...
Tue, 10 Jun, 2025 at 1:55 PM
Hello,
Any chance for user account password complexity and expiry policies?
Thanks
Article Comments
Hello,
thank you very much for your KB-Post. Currently there are no plans in that direction to be honest. May I ask, what ex...
Tue, 10 Jun, 2025 at 1:55 PM
Hallo,
ist es möglich einen Sensor zu erstellen, wo in einem Graph zwei OIDs zu sehen sind?
Wir haben bei uns mittlerweile den RX und TX Traffic von den eingerichteten Netscaler VServern einzeln als Sensor einrichten können. Schön wäre ...
Tue, 10 Jun, 2025 at 1:55 PM
If possible, I would like to "insert" (or have PRTG fetch) Geo Maps location data dynamically.
The reason is that my locations are non-static (ships) and it would be nice to have their current position displayed in the Geo Maps....
Tue, 10 Jun, 2025 at 1:55 PM
I am monitoring a Cisco 887VA router through PRTG and am monitoring the ATM interface for bandwidth but it is giving me figures of 300,00 Kbits/sec which is obviously not correct, is there some config I am missing on this?
I have several ...
Tue, 10 Jun, 2025 at 1:55 PM
There are some sensors available under the "Apc Ups.oidlib" SNMP library sensor but none of the options i see are related to individual modules or frames.
We have the need of this monitor because one of the modules recently fai...
Tue, 10 Jun, 2025 at 1:55 PM
My PRTG server it reports that its working at the limit of 4Gb ram
but my server has 16GB ram installed and 24 CPU
I need to increase that limit because I want the entire Server only for
the PRTG, no other application are running on that se...
Tue, 10 Jun, 2025 at 1:55 PM
How can I install new master node and convert the old master node as failover without loosing any da
We have 2 nodes in the cluster, one is master and one is failover. We want to create a new master node and have the same configuration with the old master node then convert this to a failover node without loosing data history?
Arti...
Tue, 10 Jun, 2025 at 1:55 PM
