kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
When attempting to create HP Proliant Physical disk sensor I receive a no disk found error: PE 188
I have used the SNMP Test tool with a walk of: 1.3.6.1.4.1.232.3.2.5 and 1.3.6.1.4.1.232.3.2.5 however it merely just states:
-----------...
Tue, 10 Jun, 2025 at 9:24 PM
I can not print the result of report send by PRTG monotor
Article Comments
Dear yadiisaac,
Thank you very much for your knowledge base post.
Please further clarify the situation, as it will allow me to better understand the ...
Tue, 10 Jun, 2025 at 9:24 PM
We have a geomap of sensors on one of our wallboard TV's however with 300 or so sensors it looks extremely cluttered. We do not need to see the locations of online sensors on the map, just the offline/down sensors. Is there a way to rem...
Tue, 10 Jun, 2025 at 9:24 PM
Hi,
I'm using Visio 2016 Pro to make an overview of the disk usage of multiple computers and shares and present this to management for reporting purposes.
Reason I want to use Visio for this is that it offers easy printing options (A...
Tue, 10 Jun, 2025 at 9:24 PM
In PRTG it is possible to filter the Events by Source, ID etc.
This Settings allow me, to create a Whitelist of Events, i want to Monitor.
Now, here is my Question: Is it possible to create a Blacklist for Event Logs (and perhaps some o...
Tue, 10 Jun, 2025 at 9:24 PM
In your manual the format is for GET requests:
http: <probe_ip> : <port_number> / <token> ?content= <valid XML_or_JSON>
This format works if I send it with the browser URL.
The same code works on another server i...
Tue, 10 Jun, 2025 at 9:24 PM
Some of our customers need to go very far in the finesse of monitoring their servers. And although PRTG already has many configuration options, they do not cover every need.
One of these needs is particularly problematic.
Use cases:
S...
Tue, 10 Jun, 2025 at 9:24 PM
Hi,
Firstly I was wondering if its possible to add bandwidth sensors that look like the devices/gauges small on the map. Next if this is possible I would like to have a few gauges that can grab the information from bandwidth sensors like ...
Tue, 10 Jun, 2025 at 9:24 PM
Hi Expertise,
I need a query which should be run in WMI to know the boot partition. (only through WMI )
Regards,
Swapnil
Article Comments
Hi there,
Create "boot_partition.wql" on the corresponding probe under &qu...
Tue, 10 Jun, 2025 at 9:24 PM
Hi,
I want add SNMP Trap Receiver sensor. I disabled cluster ability because of it but this sensor still can not be added.
To remove cluster mode I use Step 1 at link: https://helpdesk.paessler.com/en/support/solutions/articles/76000063...
Tue, 10 Jun, 2025 at 9:24 PM
I have set up an Microsoft SQL v2 as previous is deprecated and it stopped working. o I have made SQL file with exact same code, the initial get is taking VERY long, after that, the value is returns but as soon as I set up lower warning and...
Tue, 10 Jun, 2025 at 9:24 PM
We have configured PRTG in our environment to use LDAP authentication. The problem we are running into is that LDAP accounts from other domains that we have trust with don't work in our PRTG installation. Is there a way to get this to w...
Tue, 10 Jun, 2025 at 9:24 PM
I need a sensor for the storage amount left on the ZFS 3 storage machine
how can I do it ?
Article Comments
You could try out the generic and Linux based Disk sensors. But if that doesn't work you'll need to resort to...
Tue, 10 Jun, 2025 at 9:24 PM
I want to be able to see when a device is plugged into a port switch along with its usage. i currently have PRTG setup as follows. I have multiples sites and probes.
<Probe>
<Site>
<Network Devices>
<Gateway01&...
Tue, 10 Jun, 2025 at 9:24 PM
Is it possible to start a scan for all devices with a specific mac vendor?
in my case i want to add all switches to monitoring. unfortunately all devices are in different ip-ranges, so it would take me a long time to specify all ranges.. ...
Tue, 10 Jun, 2025 at 9:24 PM
Hi there,
I would like to know if we can use Veeam SNMP settings to trigger SNMP trap to PRTG probe. I knnow that we can use IMAP sensors to monitor the backup jobs. Just found out that we can also use Veeam Backup Enterprise Manager API ...
Tue, 10 Jun, 2025 at 9:24 PM
Hi,
How can I have the device tree map view in full screen?
I want to put this map on a massive screen in our office so that every engineer can see it. So I need to get rid of the graphs in right side hand of the window and have the map...
Tue, 10 Jun, 2025 at 9:24 PM
I have a windows 2016 server with a sensor on CPU and one on Memory the CPU sensor works fine but I cannot get the memory sensor to work just keep getting PE015 code error.
Article Comments
Hello PeterW,
Thank you very much fo...
Tue, 10 Jun, 2025 at 9:24 PM
Will you make it possible to create sensor groups. This will make it easier to pause multiple sensors on a device.
It will make it also easier if it's possible to clone a group sensors instead of only 1 sensor.
Maybe then it's also ...
Tue, 10 Jun, 2025 at 9:24 PM
We have recently switched over our install to SSL. We use a custom port and I'm wondering if it is possible to setup a redirect from http to https using a custom port.
Article Comments
Hi David,
If you connect to
http://...
Tue, 10 Jun, 2025 at 9:24 PM
I am trying to configure an alert notification that only happens if several devices in a group are down at the same time. For example I have 20 RDS servers and I only want it to send an alert when 8 are not responding to ping or have low di...
Tue, 10 Jun, 2025 at 9:24 PM
Hello
I was wondering if there is a possibility to monitor, if mails were sent by an application. I imagine it like that. The application is sending an additional mail to a Postbox on our Mailserver and PRTG would check, if that mail arri...
Tue, 10 Jun, 2025 at 9:24 PM
I am asking a question as I use a single user account to run multiple Maps on various monitors within our business and your recommendation of 30 user accounts is ok but would this be affected by using say 10 or 20 different Maps(Dashboards)...
Tue, 10 Jun, 2025 at 9:23 PM
Dear Friends,
I have installed PRTG and it works ok.
But i have an application installed on server that allows me to add the SNMP address in it and get notifications for the errors it may have.
How can i connect this third party applicat...
Tue, 10 Jun, 2025 at 9:23 PM
Our servers have previously been "SSL hardened". SSL 2/3 has already been disabled, many other custom configs to make it as secure as possible. Here's a good example config that should be supported: https://www.hass.de/content...
Tue, 10 Jun, 2025 at 9:23 PM
Hello Paessler Support Team,
the following error occured if we query a windows performance counter from a stond alone Windows-2012 server in the same subnet. The PRTG Core Server is Active-Directory member, the target server not.
Mit H...
Tue, 10 Jun, 2025 at 9:23 PM
Hi!
is there a way to receive down notifications per device instead of per sensor? If let's say a device has 8 sensors and the whole device gets down, I would like to have only 1 down notification instead of 8. The same goes with up m...
Tue, 10 Jun, 2025 at 9:23 PM
On new devices, we are seeing differences in the sensors added based on what we enter into the "IPv4 Address/DNS Name" field. Using the netbios name yields different results than the FQDN name. The IP address yields yet differen...
Tue, 10 Jun, 2025 at 9:23 PM
I have a Cisco IP SLA up-jitter sensor retrieving statistics from a Cisco Switch and I have noticed that one of the values (Max Latency Source-to-Destination) is not retrieved correctly, showing values different from the ones stored in the ...
Tue, 10 Jun, 2025 at 9:23 PM
Hi ,
I have writen a RESTFull web service accept JSON format. This service works on local server in company. Any client in company can post data(HTTP POST) to url. All successful.
BUT.I configure a notification for EXECUTE HTTP ACTION. I...
Tue, 10 Jun, 2025 at 9:23 PM
I want to have different line connectors colors per Bandwidth utilization for a certain map in PRTG.
Example:
0 GBit/s - gray line
1-3 GBit/s - Green
3-5 Gbit/s - pink
and so on..
Is this possible? thanks.
when I say connection line, ...
Tue, 10 Jun, 2025 at 9:23 PM
Guten Tag
Ich möchte aus PRTG ein Powershell Script starten über EXE Sensor.
Test Script sieht so aus:
$pathcount = (Get-ChildItem -Path C:\).Count
write-host $pathcount,":OK"
Nun erhalte ich zwar ein Resultat, aber immer...
Tue, 10 Jun, 2025 at 9:23 PM
Hi experts,
PRTG works with probes (local and remote) that gather all the monitoring information.
In RMON the monitoring devices are called "probes" too, but most of PRTG sensors are SNMP sensors.
I know that RMON is base in...
Tue, 10 Jun, 2025 at 9:23 PM
I can not seem to figure out how to monitor bandwidth of individual IPs on a Sonicwall TZ100.
Thanks.
Article Comments
Hello penguinview, thank you for your inquiry.
SNMP Traffic sensors can only provide general bandwidth per ...
Tue, 10 Jun, 2025 at 9:23 PM
I am trying to generate reports based on the amount of objects in a warning or paused state. This report would be ran every two weeks and sent to techs to avoid future problems with objects in warning. It would also keep techs current with ...
Tue, 10 Jun, 2025 at 9:23 PM
Hello!
I probably already told , i use arduino server on local network, where have 17 temperature sensors,
then i use in prtg network monitor HTTP Content to collect this value from server.
So far everything was fine, but now i add some ...
Tue, 10 Jun, 2025 at 9:23 PM
Hello,
I would like to monitor one Database SpaceLog with PRTG.
When I query this SQLPERF : "DBCC SQLPERF(logspace)" on my database I have row/culumn fullfil with log space and log size.
So I try to add some elements to this...
Tue, 10 Jun, 2025 at 9:23 PM
Hello
Recently we had a Problem with the Failover of our PRTG Cluster, which caused it to be disconnected from the Master for about a week. After we turned the Failover on again it showed that the cluster was back to normal (Status was ok...
Tue, 10 Jun, 2025 at 9:23 PM
Looking to monitor a pickup folder or file inbox. The normal folder & file share sensors won't work as needed.
New files are dropped into server\share
Another process polls this location every x minutes, pulls files out and rem...
Tue, 10 Jun, 2025 at 9:23 PM
Hello again.
I need help with http push data.
I have local server on 192.168.5.90, which show temperature.
The page looks like that:
HT-4: [35.94] ° C
HT-3: [36.00] ° C
HT-2: [34.50] ° C
HT-1: [27.87] ° C
I do not understand your ...
Tue, 10 Jun, 2025 at 9:23 PM
I have a lot of groups which are temporary paused. In the treemap view if I untick the paused box they'll turning to white instead of hiding.
Is there anyway to actually hide them from the treemap view?
Cheers
Hans
Article C...
Tue, 10 Jun, 2025 at 9:23 PM
WE are running PRTG Network Monitor 16.1.21.1422 x64.
When attempting to add snmp monitoring of CPU/Mem/DIsk for RHEL7, we always got the #222 error.
SNMPTester would return the following errors when we attempt to scan the interfaces.
-...
Tue, 10 Jun, 2025 at 9:23 PM
I'm getting this error when accessing a shared folder on a Windows system. I know for sure that the domain (.\), the username (administrator) and the password are filled in correctly at the device settings for the sensor, and I've f...
Tue, 10 Jun, 2025 at 9:23 PM
When using a CPU performance sensor through WMI against a Windows x64 target machine containing more than 32 processors causes the eventviewer on the x64 target to be flooded with PerfNet 2006 eventid errors. As per internet articles, it se...
Tue, 10 Jun, 2025 at 9:23 PM
when adding a snmp traffic sensor for a bintec router there is no lan Interface or Bridge Interface offered (only vpn Interfaces). in older Versions of prtg (maybe bintec Releases) you could easily add a bandwidth sensor for bintec lan Inte...
Tue, 10 Jun, 2025 at 9:23 PM
Following an update to PRTG to version 17.x.32 (or later), some of the channels in the SNMP Cisco UCS System Health sensors are no longer showing any information. And if I add sensors of this type again, these channels are gone. What is cau...
Tue, 10 Jun, 2025 at 9:23 PM
Hello!
Linux "SSH Script" sensor provide ability to execute code on target system.
How can I do this on Windows OS targets, with credentials of course?
Thanks for reply!
______
p.s. not on probe system, on targets
Arti...
Tue, 10 Jun, 2025 at 9:23 PM
Hello,
I have been troubled by this issue for a couple of weeks now.
I'm using custom WMI to check if user is logged in via RDP on a VM.
Now by my count there should be total of 15 WMI sensors and 4 probes.
By instructions I have p...
Tue, 10 Jun, 2025 at 9:23 PM
Hello,
I have random error Unable to connect: PE015 on multiple different devices.
This problem is really random error, each time with another device and only with WMI sensors
Exemple with WMI sensor, check by 10min:
08:10 => Sen...
Tue, 10 Jun, 2025 at 9:23 PM
My sensor is down for every minutes and then up again since few days ago. The error messge state: Connection refused (socket error # 10061).
Article Comments
Hello jazlyn,
Please check this knowledge base article on how to sol...
Tue, 10 Jun, 2025 at 9:23 PM
We are using a proxy which seems to work fine for all things except Paessler. I would really like the auto update to work directly from the console on the server, as i dont want to have to visit your website to mess about getting the latest...
Tue, 10 Jun, 2025 at 9:22 PM
I've been trying to set up a PRTG sensor which will allow me to monitor SQL agent jobs I've got the SQL script fine and I'm running this using the Microsoft SQL V2 sensor which is giving me the expected output, unfortunately PRT...
Tue, 10 Jun, 2025 at 9:22 PM
I have purchased PRTG monitor tool Licence previously i was using that license on one system but becous of fire that system get crash.. . So i was trying to activate that licence on another system but it showing following errr msg
That ...
Tue, 10 Jun, 2025 at 9:22 PM
I can't figure out how to create an alert.
I want to know via a text message when a PC on my LAN stops communicating.
Thanks,
Docfxit
Article Comments
Hi Docfxit,
You can configure your own notifications here:"Setup...
Tue, 10 Jun, 2025 at 9:22 PM
I have now tried four times to install PRTG with no success;
Windows 10, 8GB, i5 3.30GHz
When it comes to the end of the install process it tries to start and I see this;
Please wait until PRTG's web server is running...
Connectin...
Tue, 10 Jun, 2025 at 9:22 PM
I've used both the paid and free versions and appreciate PRTG very much! I recommend it often.
I have come to realize that my installations are never very "stable" in the sense that I go away for a couple of months and when I...
Tue, 10 Jun, 2025 at 9:22 PM
I want to test some functionality on an SQL Database with result 0 (succes) or 1 (false)
But i cannot get the returncode of the SP interpreted.
I stumbled upon this half a year ago also , and back then i just created a workaround by running...
Tue, 10 Jun, 2025 at 9:22 PM
when I generate my usage with "no interval" my usage is more?
So I must pay internet usage in base of report,
you think "no interval" must be mark? or other selection is correct?
wait for your reply
thank you ve...
Tue, 10 Jun, 2025 at 9:22 PM
hi.
I have a url that show me a number. and every minutes this number changed and get down.
I want to monitor this url an when that number below than a number that I set before, prtg email or notify me.
I use PRTG 13.
Article Commen...
Tue, 10 Jun, 2025 at 9:22 PM
Hey Guys,
I have some problems getting sflow to work on a HP Procurve 2810.
I think my configuration on the Switch is just fine. Sflow is enabled and sending Datagrams.
But PRTG is not recieving any data. The sensor is stuck in "grey&q...
Tue, 10 Jun, 2025 at 9:22 PM
I have a firewall with a two sensors, one for the LAN facing interface and another for the WAN facing interface.
For all intents and purposes they should be equal, the traffic entering the LAN interface should be about the same as the tra...
Tue, 10 Jun, 2025 at 9:22 PM
Hi,
I am new to PRTG. I installed a core server using PRTG v17.2.31.2018.
I created a device template in order to deploy similar sensors to multiple windows servers.
I ran the Auto Discovery > Run Auto-Discovery with template but t...
Tue, 10 Jun, 2025 at 9:22 PM
I'm trying to 'Packet Sniff' my Checkpoint Firewall & or Cisco Router.
If I'm correct, I need to create a new 'Remote Probe', but both of this devices are Linux based.
I might be wrong so I would love to get some...
Tue, 10 Jun, 2025 at 9:22 PM
Hello
I need an answer for a presentation.
What kind of technology or protocol PRTG use between core and probe server to communicate
(JDBC, SNMP etc..)
Article Comments
Hello Ahmet,
The PRTG probe connects to the core server u...
Tue, 10 Jun, 2025 at 9:22 PM
Hello
We receive this email twice by day, i don't want anymore.
I put on pause the 32 probes (above the permitted 500). I still get email alerts. I don't want to remove the 32 probes because occasionally I disable one for reacti...
Tue, 10 Jun, 2025 at 9:22 PM
Hi,
I want to export all group devices with their GPS location. How can i do that?
Thanks in advance
Article Comments
Hi Luis,
You can find the documentation of the API in your webinterface under "Setup > PRTG API&q...
Tue, 10 Jun, 2025 at 9:22 PM
Hello, I want to create Sensors to get the result from Batch files.
I get the error Response not wellformed (code:PE132)
Here is my Batch file
@echo off
REM Sample Exe/Script Advanced sensor
REM Returns fo...
Tue, 10 Jun, 2025 at 9:22 PM
I installed remote probe on a server, but it shows: Login not ok: Wrong version
Could u help me? Thanks.
Article Comments
Hey orientorient,
Thank you for your KB-posting.
The Remote Probe needs to run the very same version ...
Tue, 10 Jun, 2025 at 9:22 PM
Hello everybody,
we want to check, if a html file is only accessible in a authentication secured space. So we want to create a sensor, which reply a 401 as "OK" status.
Is this possible?
Thanks Peter
Article Comment...
Tue, 10 Jun, 2025 at 9:22 PM
I am making a map for our customer and would like to show the 95% percentile value for a given range, how can I achieve this?
Article Comments
Dear mtrifilo
Percentile computation is only available for reports, not for maps. A...
Tue, 10 Jun, 2025 at 9:22 PM
Hello
How can I change the units of bandwidth in a report? I want the report to display the value in Mbps/Gbps/Tbps. The value displayed is in Kbps and is not very useful for management.
Article Comments
Dear sakun
Please op...
Tue, 10 Jun, 2025 at 9:22 PM
Setting up a SNMP Trap receiver sensor for our HP servers. Want to include any hardware issues in the error filter. Any one have any good guidance on setting up filters for this sensor
Article Comments
Hey Eric,
Thank you for y...
Tue, 10 Jun, 2025 at 9:22 PM
Hello,
I have been setting up HTTP Push Data Advance sensors, and they work great. But, when a sensor is in a DOWN state and then comes back online, the downtime percentage stays at 0% and the update remains at 100%. This used to work abo...
Tue, 10 Jun, 2025 at 9:22 PM
Hi,
Is it possible to collect state change (alert) information for our sensors WITH historical data (past changes) and in bulk (all sensors in one call or at least in large groups) via the PRTG API?
So far I have been sifting through th...
Tue, 10 Jun, 2025 at 9:21 PM
Alarms are tapped but clear on the next scan.
Article Comments
Hey vk6xre,
Thanks for your KB-posting.
Actually, it is not possible in PRTG to leave the SMTP Trap sensor in DOWN/ERROR-state until it receives an OK-message.
...
Tue, 10 Jun, 2025 at 9:21 PM
Somehow I can restart a device through the PRTG
Example: A Mikrotik device stops responding and then I reboot it via the PRTG via SNMP.
Article Comments
Hey Leonardo,
Thank you for your KB-posting.
Actually, this is not ...
Tue, 10 Jun, 2025 at 9:21 PM
Hello !
I want to make a detection for the a routing table in order to see and detect the IP routing saturation.
Thank you.
Article Comments
Hey Fouad,
Thank you for your KB-postin.
If you know the responsible OID for t...
Tue, 10 Jun, 2025 at 9:21 PM
Hello PRTG folks -
We have 6 core prtg servers monitoring different assets of our datacentre and would like to be able to monitor these within one place. For a little context we have PRTG1 - PRTG6. I would like to get the core health sen...
Tue, 10 Jun, 2025 at 9:21 PM
Is it possible to monitor one Value of a website and display it as a channel? I already tried HTTP Advanced, but it only gives me the possibility it value is not found or is found. I also tried XML/REST but I cannot find a node to monitor. ...
Tue, 10 Jun, 2025 at 9:21 PM
I notive that I've lost the default dashboard (Dashboard 1, Dashboard 2 and Dashboard 3) which are located under the "Home" tab top-right.
I've tried to reinstall it again but it's still the same.
If I try to reach...
Tue, 10 Jun, 2025 at 9:21 PM
%1 is not a valid Win32 application. (0xC1)
error when generating reports and sending it as email, or storing it.
However, reports are generated properly in HTML format and can be viewed correctly.
What is needed to run this automatic r...
Tue, 10 Jun, 2025 at 9:21 PM
I created a template of a device. But when I apply the template to other devices the sensors are not added. Its very simple and all sensors are supported.
They are...
Ping
CPU Load
Memory
Hard Drive Space (multi)
Article Comment...
Tue, 10 Jun, 2025 at 9:21 PM
Hi,
i have prtg installed and i'm able to access it from the web. when logging to the server, error message appears in the Enterprise Cosole. it states the following:
Not Connected (IIS 7.5 Detailed Error - 500.19 - Internal Server Erro...
Tue, 10 Jun, 2025 at 9:21 PM
I have a Powershell script that will install windows services onto a server and would like to automatically get this service added to the device on PRTG is there a way to do this via Powershell by either calling an API or using another meth...
Tue, 10 Jun, 2025 at 9:21 PM
I downloaded and installed the trial version of PRTC Network Monitor. I am looking for a Real-time Bandwidth monitor to replace Solar Winds Real-time bandwidth monitor. Does PRTC Bandwidth monitor have that capability?
Article C...
Tue, 10 Jun, 2025 at 9:21 PM
Hi,
I would like to know if I can monitor a html page, in particular if this page change content between last scan with the new scan (a scan every 1 hour)
Article Comments
Hi there,
You can use the "HTTP Advanced" ...
Tue, 10 Jun, 2025 at 9:21 PM
I need to monitor the nos of IP address leased from the device periodically. Thus, I am able to monitor whether my IP address is underutilized which I am able to increased if there is a need.. I had tried using Sessions Counts but it does n...
Tue, 10 Jun, 2025 at 9:21 PM
Hello Team,
We want some reports in excel format we are doing this with the help of "PTF.CSVExport". We want to combine result for all CPU sensors but I am not able to add device name column in result csv.
I am using below comma...
Tue, 10 Jun, 2025 at 9:21 PM
Hello everyone,
I'm monitoring SonicWall VPN sensors using the "Policy Name" as the identification method and I just got curious how PRTG does this monitoring.
First, the OID that SonicWall uses to show the Active Tunnels ...
Tue, 10 Jun, 2025 at 9:21 PM
Forgive me in advance as I'm not a power user. I downloaded PRTG Network Monitor and simply want to monitor latency from my workstation to an external IP address. I'm not quite following how to configure this? Thanks!
Art...
Tue, 10 Jun, 2025 at 9:21 PM
Hello,
We are using a clustered PRTG environment and I was wondering if it is possible to use one IP address to reach the active node?
We would like to go to https://prtg.company.com to reach the active PRTG node even if the master node...
Tue, 10 Jun, 2025 at 9:21 PM
Is there a way to select which sensors run? We are a small shop ready to grow over time but right now 1000 for the trial or even 100 sensors after 30 days aren't needed.
Thanks.
Article Comments
Dear jaymartinez
Please ...
Tue, 10 Jun, 2025 at 9:21 PM
prtg have a alarms table with ALL warning and alarms.
now we have more groups. a group for Linux, a group for windows etc.
It is possible to create a alarms table only from a single group, for example "Windows" ?
Thanks for he...
Tue, 10 Jun, 2025 at 9:21 PM
Is there still no way to set a gauge maximum?
I have several sensors that display values in gauges. But they always use the maximum value measured as maximum value in the gauge. For example i'm monitoring our UPS load values. The are ...
Tue, 10 Jun, 2025 at 9:21 PM
I updated to version 17.2.32.2779 yesterday and since then, all the physical disk sensors of our Dell Poweredge 730 servers show warning with this message: "Warning by lookup value 'Undefined lookup value (0)' in channel 'S...
Tue, 10 Jun, 2025 at 9:21 PM
Hello all, i was looking for a bit of input on a strange problem im having with WMI sensors, they often show the famed PE015 error for around 80% of the time, however the other 20% they display accurate disk space and cpu data. I have tried...
Tue, 10 Jun, 2025 at 9:21 PM
Is their a built-in sensor to perform web page navigation tests? Alternatively, a pre-built script that can be tailored for this. I was looking at the webstress tool which sounds like it can do it, but not sure if that could then be put i...
Tue, 10 Jun, 2025 at 9:20 PM
For some reason, when I try to add the following line of code, I get an error:
p = subprocess.Popen("df -Pk -m -xtmpfs -xdevtmpfs", stdout=PIPE, shell=True).stdout
I initially had code that used os instead, but that didn't...
Tue, 10 Jun, 2025 at 9:20 PM
Hello together,
after we've seen that Paessler use the APC Netbotz to monitor his Datacenter we've also ordered a small APC Netbotz 250.
At first we want to use the Sensors for Temperature. We have two Temperature-sensors connec...
Tue, 10 Jun, 2025 at 9:20 PM
Hello guys,
Have got three remote probes sending the information from there connected sensors back to my core probe, when I view my probes via the devices sunburst view, I get a single graph containing the information of all three remote ...
Tue, 10 Jun, 2025 at 9:20 PM
