kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hello.
I am the new administrator in my company that will take care of the prtg monitoring. My first job after reading manuals and watching videos on the website is to rearrange the maps of our company. For a simple new map of group with 8...
Tue, 10 Jun, 2025 at 8:54 PM
Anyone monitoring VOIP calls connected with Vonage?
Article Comments
Sorry, never heard of these. But did you already try our SIP Options Ping Sensor and the QoS sensors?
Kind regards,
Stephan Linke, Tech Support Team
D...
Tue, 10 Jun, 2025 at 8:54 PM
Hello.
Since my last question, something ... weird ... happened to my computer, requiring me to reload the prtg program.
When it was loaded it gave me a message "Please wait for prtg server to start". Reading through other th...
Tue, 10 Jun, 2025 at 8:54 PM
Is it possible to have a local probe on a cluster failover node (just as you can on the cluster mast
When clustering, on the cluster master you have two probes, the local probe and the cluster probe.
When making another instance of PRTG a failover node, you loose the local probe on that device, and inherit the cluster probe (and associat...
Tue, 10 Jun, 2025 at 8:54 PM
hi all,
i install PRTG on a VM to monitor other VM's in same class IP. but, there is problem when i try add sensor, there are error appear "No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, commu...
Tue, 10 Jun, 2025 at 8:54 PM
I have created a partial selection of a MIB. When I Save it for PRTG Monitor all seems ok.
When I go into PRTG and try to add a sensor using the Part MIB about half of the info is missing...??
At no time did I get any error messages. :-...
Tue, 10 Jun, 2025 at 8:54 PM
Hi!
Is it possible to sort favorites?
I'd like to sort them manually but alphabetically would also be ok.
Björn
Article Comments
Hi there,
You can click on the columns of the Favorite-Table to sort the devices/sensor...
Tue, 10 Jun, 2025 at 8:54 PM
We are running PRTG 17.3.32.2478 and we are using the API to access the sensor date from one of our web servers to provide a filtered view for each customer's systems on our website. The web server wants to connect using TLS 1.2 by defa...
Tue, 10 Jun, 2025 at 8:54 PM
I'm running latest release V.17.4.36.3506 and I get the following message on all Windows Update Status sensors :
This sensor requires the PowerShell 2.0 (or higher) to be installed on the probe system.
( Unhandled Exception: System.I...
Tue, 10 Jun, 2025 at 8:54 PM
Should the dependent services on a different device be paused when the 'dependency' sensor is paused?
We have two trees of devices (Servers and Services). The devices in the Services tree will be dependent on a PING sensor for the...
Tue, 10 Jun, 2025 at 8:54 PM
Can you please tell me how I can easily see what the sensor type is in the new UI? In the old UI, it used to be displayed in the bar along with the sensor name (I think).
Knowing the sensor type is often very helpful, especially when tro...
Tue, 10 Jun, 2025 at 8:53 PM
After installing the latest build, I am no longer able to goto Devices and drill right down to the specific group I am looking for. I miss this functionality. Is there a way to still do this?
Article Comments
Hello Jon,
we a...
Tue, 10 Jun, 2025 at 8:53 PM
Hi everyone,
I facing this issue, I can't add DHCP Sensor. I'm getting this message that the device needs a static IP, but my server is configured with static IP.
I'm using PRTG latest version and the DHCP Server is a Window...
Tue, 10 Jun, 2025 at 8:53 PM
Hi PRTG, can remote probe on branches site to HQ site via normal internet due to our site branch has no vpn connection. is that secure?
Article Comments
Hi Dean92,
According to How Probes Work section on https://www.paessler.c...
Tue, 10 Jun, 2025 at 8:53 PM
We have many Microsoft SQL v2 sensors measuring metric values from a database. This all works very nicely and the status of each sensor is set by an integer value form the database (eg 3 = Down, 2 = Warn, 1 = OK). The metric value (numerica...
Tue, 10 Jun, 2025 at 8:53 PM
Hi there,
I was wondering if it is possible to monitor the number of files on an FTP server that have a specific extension, i.e. count the number of *.TXT files?
Many thanks
Callum
Article Comments
Hi Callum,
Unfortunately...
Tue, 10 Jun, 2025 at 8:53 PM
Hi,
I've a question about the Docker (béta) sensor. This sensor is working, but our containers works in a Swarm. In a Swarm the name of each container is not unique. Beside name there's a unique id in the name. When one container ...
Tue, 10 Jun, 2025 at 8:53 PM
Hello together,
I'm monitoring our external storage, a so called Buffalo Terastation with the "folder" sensor.
The trashbox is activated and the video-surveillance just drops about 20 GB of data in half an hour.
I want to ...
Tue, 10 Jun, 2025 at 8:53 PM
I do realize the new UI is work-in-progress, but here are some issues I feel you need to address quickly.
After the new web interface was introduced in 17.4, the readability of text (in general) has decreased severely. Is there any way to...
Tue, 10 Jun, 2025 at 8:53 PM
We have a number of sensors that are active for a week at a time, only 2-3 times a year. These sensors are for devices that travel to trade show booths. I don't want to delete the sensors, and pausing indefinitely just clogs the list...
Tue, 10 Jun, 2025 at 8:53 PM
Hello,
we are successfully using some powershell scripts to monitor different things.
The only problem or question we have is, is it possible to give a date as a value back to ptrg?
We want the date to be shown in prtg dashboard underneat...
Tue, 10 Jun, 2025 at 8:53 PM
hellow im using it korean
nice happy to meet you!
so..
return to the main subject
when I started prtg,
It was displayed on the screen.
"socket error # 10061 connection refused "
Article Comments
Hi there!
Could yo...
Tue, 10 Jun, 2025 at 8:53 PM
I have a PING sensor and a Windows Update sensor on a device that is a server. I only want to get a notification from the PING sensor if it ever goes down. This currently works well for me for the ping sensor. After adding a Windows Update ...
Tue, 10 Jun, 2025 at 8:53 PM
I have to move our prtg installation from windows 2003 since it is not supported any more.
The move instructions state that we need to install the same version on the new server:
https://helpdesk.paessler.com/en/support/solutions/articles...
Tue, 10 Jun, 2025 at 8:53 PM
Monitoring may be incomplete or inaccurate due to fundamental problems in your PRTG installation! Click here for more information!
397 % Delay (Interval Delay WMI) is above the error limit of 100 % Delay in Interval Delay WMI. WMI Sensors...
Tue, 10 Jun, 2025 at 8:53 PM
PRTG is creating tickets regarding
Value lookup file "C:\Program Files (x86)\PRTG Network Monitor\lookups\prtg.standardlookups.dell.equallogic.powersupplystatus.ovl" could not be loaded (List index out of bounds (0))
And other ...
Tue, 10 Jun, 2025 at 8:53 PM
Hello,
I want to check tcp port disponibility from a server outside my network. I think that a Port sensor type could be useful, I have already read your manual but I don't know how to setup it.
Best regards.
Article Comment...
Tue, 10 Jun, 2025 at 8:53 PM
I want know meaning different parameter in custom snmp library imported from mib importer
Example:
<type>vmAbsolute</type>
<kind>mkTable</kind>
Article Comments
Which device is the custom snmp libra...
Tue, 10 Jun, 2025 at 8:53 PM
Hello,
I have EXE/Script sensor with powershell script. This script is using ODBC to check values in my Firebird database. Some days ago I had to change password database and sensor stop working. So I changed password in my ODBC source but ...
Tue, 10 Jun, 2025 at 8:53 PM
I am trying to use a Python Custom Sensor to ssh to a device, run a single command, capture the output and return that to the channel sensor.
My SSH code works great on its own :-)
Ideally I like to pass the username and password to the...
Tue, 10 Jun, 2025 at 8:53 PM
Hello folks,
We have an issue regarding the copyright information on maps. After the latest update to version 17.4.36.3595 (with the new web-GUI) we noticed that the following copyright information appears on all of our maps:
PRTG Netwo...
Tue, 10 Jun, 2025 at 8:53 PM
Am getting a warning message, monitoring may be incomplete or inaccurate because 1 or more parts of PRTG re not working properly.
The last message is 244 % Delay (Interval Delay WMI) is above the error limit of 100 % Delay in Interval Del...
Tue, 10 Jun, 2025 at 8:53 PM
Is there any way to pass SNMPv3 information via placeholders for custom EXE's or scripts? I've found placeholders for SNMPv2 information, such as community, as well as Windows username/password and linux username/password, but I can...
Tue, 10 Jun, 2025 at 8:53 PM
We wanted to migrate our production environment from Windows Server 2012 R2 Standard Edition to Essential Edition. are there know issues of running PRTG with the Essential Editions?
Article Comments
Hello,
Thank you for the KB...
Tue, 10 Jun, 2025 at 8:53 PM
Hi Paessler,
we have a sensor built that reports numbers of calls on our SIP lines as a channel each, i need to export this for the month of november with the min and max values. Is this possible via API ?
My current query is
/api/h...
Tue, 10 Jun, 2025 at 8:53 PM
Hi guys,
I would like to include in a map some information about PRTG installation,
like numbers of sensor used and the number of daily scans.
Is there a way to do it?
Thank you
Article Comments
Hey Vogs7,
There is a senso...
Tue, 10 Jun, 2025 at 8:53 PM
Hi,
I want PRTG to monitor an API (via a GET) and have a channel plot the number of results returned, so I can track licensing restrictions.
So when I run the query on day 1, the JSON returned would be like:
[
{
...
Tue, 10 Jun, 2025 at 8:52 PM
I'm trying to get PRTG to pick up my veeam backup and replication. I found a good script "or so i thought" here is the code. I get the JSON error. XML: Structural Error in XML file, 1 open items. --JSON: The returned json d...
Tue, 10 Jun, 2025 at 8:52 PM
Hi I installed this version on the 8th of December 2017. At about 10AM I took the system down, made backups brought back
online and applied the update. I did not notice until today that one of our sensors (a foldersensor) was showing unus...
Tue, 10 Jun, 2025 at 8:52 PM
I have a sensor for an IMAP mailbox counting the emails once a hour. I'd like to get an alert, if the number of emails keeps raising for lets say the last 3 hours.
Is this possible and how to configure?
Thanks.
Article Comment...
Tue, 10 Jun, 2025 at 8:52 PM
Hello,
I need to monitor a Folder in a Server. A Security Cam writes files into the Server every 5 Minutes. It also Updates an log File.
Know we recognize that the Cam did not write the Video Chunks but updates the log File. So our Fold...
Tue, 10 Jun, 2025 at 8:52 PM
Is it possible to change the intervale on report template?
I can just select the Graph Only (1 min interval) template but I need 30 seconds interval for more percision like I can find in historical data of the needed sensor.
Thank you. ...
Tue, 10 Jun, 2025 at 8:52 PM
On our Cisco ASR4331 routers, we would like to monitor the true bandwidth of the internet connection on the router interface. We have several circuits with various speeds ranging from T1, to 100Mbps. It looks like the PRTG is reading the in...
Tue, 10 Jun, 2025 at 8:52 PM
Since one day we get this errormessage:
"Unexpected connection drop (code: PE039)".
The Sensorsettings are:
POP3 Specific, TimeOut 60Sec, Port 110
Transport-Level Security, Pop3 Secific Use Transport-Level Security if avail...
Tue, 10 Jun, 2025 at 8:52 PM
I'm aware to query the syslog sensor by structured data fields (SD-ID,param-name,param-value) as shown at https://www.paessler.com/blog/introducing-the-new-high-performance-syslog-and-snmp-trap-receiver-sensors , but is it possible to d...
Tue, 10 Jun, 2025 at 8:52 PM
I've configured my cisco gear for SNMP V3, and in my PRTG a sensor trap for them. The version displayed in my PRTG is V1. Is that right, or did I miss a config somewhere?
Article Comments
Hi skygremlin,
The SNMP Trap Rec...
Tue, 10 Jun, 2025 at 8:52 PM
dear Tech team
ive a question i wonder if i could use multiple ip address on my server ( public and private)
what im gonna say is that i want to monitor some devices with public ip and some with a private one , can i use to NIC's on my...
Tue, 10 Jun, 2025 at 8:52 PM
Hi,
After installing latest PRTG rel. 17.4.36.3670, all Windows Update Status sensors stopped working properly.
I get the following error message :
XML: The returned XML does not match the expected schema. (code: PE233) -- JSON: The retur...
Tue, 10 Jun, 2025 at 8:52 PM
I'm creating a powershell script that queries processes on a server, however I use a parameter that needs elevated rights. Is there a way to get the sensor to launch the powershell process as admin? The sensor ends up returning "Re...
Tue, 10 Jun, 2025 at 8:52 PM
We used to have a VPN that connected 2 networks which which are in different networks to be able to monitor devices on both using one PRTG instance. After an server move of physical location, and due to business reasons, we can't create...
Tue, 10 Jun, 2025 at 8:52 PM
How do I configure PRTG to monitor a specific service on a Windows server?
Article Comments
Hi Anthony,
You can use the WMI Service Sensor to monitor a specific service. The sensor is described on the following site:
https://...
Tue, 10 Jun, 2025 at 8:52 PM
Hi,
Our PRTG structure is set up with a hierarchy of Location/DeviceType/Subtype/Device, such as SiteXX/Servers/Linux/serverxx. In the notification's Group: field expanded from %group, it only shows "Linux", not the full hie...
Tue, 10 Jun, 2025 at 8:52 PM
I am trying to monitor traffic bandwidth running across a peering connection. Both peers are on the same interface so monitoring the interface just shows me the total for both. I need to be able to separate them out. Can this be done with P...
Tue, 10 Jun, 2025 at 8:52 PM
We create a snmp trap sensor and trap messages are not received. The server port 162 is open and listening. In addition, we confirm via sniffer that snmp trap messages are arriving on the server. How shall we proceed?
The trap receiving s...
Tue, 10 Jun, 2025 at 8:52 PM
Didn't change anything but suddenly the Autoupdate does't work anymore, getting continuous "Unauthorized Message"
since days:
[28.12.2017 10:21:36] Autoupdate: Fehler beim Herunterladen des Updates (HTTP/1.1 401 Unauthoriz...
Tue, 10 Jun, 2025 at 8:52 PM
How Can I write custom script along with using file content sensor provided my PRTG. Actually after finding error in log file i want to rename that file and create new file with same name. I could not achieve it using File Content sensor. O...
Tue, 10 Jun, 2025 at 8:52 PM
Hi
I've integrated some PRTG maps in our web site. My problem is about target of the link associated with map objects
When I click on a map objet, the link is open into a new tab or on the root frame of my web site. I would like the l...
Tue, 10 Jun, 2025 at 8:52 PM
The map graph no longer shows the locations, only the devices.
Article Comments
Hi Fritz,
What version of PRTG are you currently using? Please note that the default (free) map provider discontinued their service and started it...
Tue, 10 Jun, 2025 at 8:52 PM
Hi everyone :-)
I have a little problem.
We have many Cisco Switchs and i would get the interface descriptions up to date.
On our Catalyst C3560, this works perfect.
But we have also some Catalyst C2960 switches. But on theese switches,...
Tue, 10 Jun, 2025 at 8:52 PM
Hello mates.
On the last update, PRTG changed dashboard layout.
Unfortunately my costumers preffer the old layout.
There is a way to go back to that?
Best regards.
Article Comments
Hi Rodrigo,
Reverting to the previous i...
Tue, 10 Jun, 2025 at 8:52 PM
hi,
I'm trying to extract a data from a html page as follows:
<html>
<body>
Temperatura attuale:
[17.50]
</body>
</html>
PRTG always answers me with:
Last Message:
<html><body>
I chose the ...
Tue, 10 Jun, 2025 at 8:52 PM
In the top right corner of my PRTG sensor setup where the Paused, warning and error sensors are displayed I get a grey box that says "New Log Entries" and it is just getting hammered and filled up by the second. Everytime I click ...
Tue, 10 Jun, 2025 at 8:52 PM
We have some staff who are colorblind. Is it possible to change the colors of Sunburst and/or Treemaps to show different red/green colors? If so, how would that be done?
Article Comments
Hi,
yes, the colors can be changed. Pl...
Tue, 10 Jun, 2025 at 8:52 PM
hi , I need to add sensor to website to check for error code like 500,404,401. or if it is 200 then say OK .How can I achieve it ? I need to do this with IIS logs.Only reading IIS log file and searching for particular string e.g. 500 using ...
Tue, 10 Jun, 2025 at 8:52 PM
I have SNMP string activated ob my destination devices , when I try to add SNMP sensor on my devices
I have installed PRTG and have activited community string on my target devices which need to be monitored other then default string. Now when I try to add SNMP sensor on my devices it shows error that SNMP cannot be added
Article Co...
Tue, 10 Jun, 2025 at 8:51 PM
Hello,
I want to change the alert threshold of several sensors at the same time. The parameters do not allow to change the trigger value.
What the easier way to do that ?
Thanks
Article Comments
Hi there,
Did you already...
Tue, 10 Jun, 2025 at 8:51 PM
Just wondering is anyone else experiencing this issue.
Every time I click on the "Webstyling" link it just redirects to "api.htm?tabid=1" instead of "api.htm?tabid=10"
I can't seem to find a whole lot o...
Tue, 10 Jun, 2025 at 8:51 PM
How can I see the devices connected to a LAN Switch?
Article Comments
Hi nl2025,
An automatic mapping for devices which are connected to switches is not part of PRTG Network Monitor. If you named the interface by the devices w...
Tue, 10 Jun, 2025 at 8:51 PM
I have two Arista switches with bgp peers in Vrfs. When i try to add bgp peer sensor in prtg, it says no interface found. I believe we need to do something for bgp peer sensors if peers are in Vrf. Can someone help what i need to do to enab...
Tue, 10 Jun, 2025 at 8:51 PM
Hi Paessler,
I have a DHCP sensor on my PRTG probe. It says Timeout. How do I troubleshoot further?
Thanks,
Bjorn Dirchsen
Article Comments
Hi Bjorn,
Thank you for the KB-Post! Since DHCP is very "low level", I...
Tue, 10 Jun, 2025 at 8:51 PM
We use PRTG for infrastructure and it does an outstanding job providing us detailed information. We are alerting on device down on many devices. What is the best way to automate self-healing alerts on critical devices that have come back...
Tue, 10 Jun, 2025 at 8:51 PM
Hi,
nach jedem automatischen Suchlauf erhalten wir eine Benachrichtigung via E-Mail.
Besteht die Möglichkeit die Benachrichtigung abzuschalten?
BR
Article Comments
In der aktuellsten Version wird nur benachrichtigt, wenn tat...
Tue, 10 Jun, 2025 at 8:51 PM
Here is my /etc/snmpv3.conf on AIX 6.1
--------------------------------------------------------------------------------------------------------------------------------------
VACM_GROUP group1 SNMPv1 yurapub -
#VACM_VIEW defaultView ...
Tue, 10 Jun, 2025 at 8:51 PM
I'm trying to get a PowerShell script to work with an EXE/Script Advanced Sensor but I can't seem to get PRTG to recognise the JSON output. It says
"XML: The returned XML does not match the expected schema. (code: PE233) --...
Tue, 10 Jun, 2025 at 8:51 PM
Hallo Paessler Team,
Kleine Rückfrage zu dem unten stehenden Log.
Wie ersichtlich, die Applikation läuft virtualisiert auf Win2k8 R2 mit 24 CPUs (1 Socket)
Beim sichten der Logs während des Upgrades auf die aktuelle Version, viel auf da...
Tue, 10 Jun, 2025 at 8:51 PM
How to monitor logon attempt error if user misses password for example 5 times in 1 minute
Which sensor would I use?
Article Comments
Hi Daniel,
Unfortunately, there is no dedicated sensor to monitor this. However you can try ...
Tue, 10 Jun, 2025 at 8:51 PM
I am wanting to create a sensor that would check (via PING) to see that a PoE device is reachable. If not, I would like to perform an automatic shut/noshut on the port of the Cisco switch that device is connected to. Is this possible as a P...
Tue, 10 Jun, 2025 at 8:51 PM
Helllo!
I am using the SMNP traffic sensor / bandwith sensor to monitor traffic going to through a firewall. This works - no problem
Example:
Channel ID Last Value (volume) Unit Last Value (speed) Unit Minimum Maximum Unit
...
Tue, 10 Jun, 2025 at 8:51 PM
Hello,
I've browsed through the forum and doesn't seem to find an answer if it is possible pass sensor channel ID for EXEXML advanced custom sensor. It would be ideal if channel IDs would reflect the internal IDs we have but I do ...
Tue, 10 Jun, 2025 at 8:51 PM
Hi,
I am facing this error :"External EXE/Script did not return a response (code: PE087) " when I try to run power shell script in custom sensor-exe/script. I read other posts regarding same issue and I gave admin account in lo...
Tue, 10 Jun, 2025 at 8:51 PM
I want to be able to display name of a channel in full next to a gauge in PRTG maps. Is that even possible. I have copied Channel Gauges and created custome map object. I cannot however work out how to make the boxes bigger or text to displ...
Tue, 10 Jun, 2025 at 8:51 PM
The download provided is a windows download. Is there a OSX version?
Article Comments
Sorry, PRTG is Windows only :)
Kind regards,
Stephan Linke, Tech Support Team
Jan, 2018 - Permalink
Tue, 10 Jun, 2025 at 8:51 PM
I recently upgraded all my servers to 2016, and reinstalled PRTG after downloading the latest version. I am unable to build a cluster, the option is greyed out and it tells me to go to Administrative Tools to enable. I cannot find any opt...
Tue, 10 Jun, 2025 at 8:51 PM
I wrote a script to get all the exchange server names you specify and it gets their version numbers. But I cannot get PRTG to display them. Rather have the names anyway but after reading multiple forum posts this is not possible I guess.
Ma...
Tue, 10 Jun, 2025 at 8:50 PM
How can I monitor the status of redis server using PRTG?
Article Comments
Hi Yoyo,
Yes, Redis supports snmp monitoring.
Using PRTG's SNMP Custom Sensor and the OID's below should get you started.
.1.3.6.1.4.1.20267...
Tue, 10 Jun, 2025 at 8:50 PM
I have a problem with this software.
I want to sort and save the logs.
and I haven`t any information from 'Green It' and 'syslog receiver' sensors.
Article Comments
Hi there,
Unfortunately, I am unable to reall...
Tue, 10 Jun, 2025 at 8:50 PM
Hi,
We have a Win 2012 server with 2 local HDD
We usually check free space limit as follow warning-25% down -10%
on one of the HDD have 6% free space and we are good with it so we changed the channel limit to warning-4% and down 2%
Unfo...
Tue, 10 Jun, 2025 at 8:50 PM
Hi support, after the last update of prtg, I had problem with 2 sensors of type http they simply stopped working
Version 17.4.36.3670
Article Comments
Hi Daniel,
Have you tried adjusting the timeout value in the sensors? A...
Tue, 10 Jun, 2025 at 8:50 PM
Hello,
I would like to know if there is a sensor (or method) to check the state of a snapshot.
I find nothing conclusive about it.
Thank you.
Article Comments
There's currently no dedicated sensor. In case you're referri...
Tue, 10 Jun, 2025 at 8:50 PM
In the channels in Graph under Sensor Data, what is the equivalent Traffic measured in, IN (average and max) and OUT (average and max).
Article Comments
Hi there,
Unfortunately, the question isn't very clear. Do you want t...
Tue, 10 Jun, 2025 at 8:50 PM
I installed StatisticalPingXML.exe, and set it up to ping two ip addresses. It has been working fine for a couple months but this morning it went down. I can ping both addresses from the server so i know ping is working, just seems to be ...
Tue, 10 Jun, 2025 at 8:50 PM
Hello I cannot get SNMP CPU statistics on our Cisco ISR 4331 router. I am able to pull other info from SNMP. I have tried different oid numbers with no luck. Any help would be greatly appreciated because it work on our old 7200 cisco router...
Tue, 10 Jun, 2025 at 8:50 PM
Hello hello paessler, happy new year from Aspire!
I need to monitor the logs of vcentre in order to track the status of our zerto disaster replication system which feeds information into the vcentre logging. I am unable to find an out of...
Tue, 10 Jun, 2025 at 8:50 PM
I have a custom sensor configured to capture a string value. It displays the result without issue. My problem is that I cannot see any history of the responses. My goal is to be able to be notified of the change (this is already working)...
Tue, 10 Jun, 2025 at 8:50 PM
Can we use html links in group/device comments?
So we can have them show up in our email notifications?
I tried to use < values in the comment but PRTG replaces them with {.
Article Comments
Hi,
The brackets < and >...
Tue, 10 Jun, 2025 at 8:50 PM
We are getting the above error with some sensors (not all) on some servers (not all)
WMI is working correctly and if I use a local machine account (as opposed to the domain account we normally use) it works fine.
It mainly affects only CPU ...
Tue, 10 Jun, 2025 at 8:50 PM
Morning,
My name is Elie, my question is about prtg.
These is now one month using prtg as a monitoring tool, i enjoyed...but the fact of my question looks like this:
In my LAN, i can access the prtg on any computer by just typing the ip a...
Tue, 10 Jun, 2025 at 8:50 PM
Hi guys,
I did a search if somebody made a ps1 script before to read the status page of PHP-FPM. But it doesn't seem to exist yet?
Unfortunately I'm not handy with this and I would appreciate some help.
PHP-FPM has a built-in ...
Tue, 10 Jun, 2025 at 8:50 PM
How can i link at best a Map (URL) into an device?
I ve overview plans (maps) with all my devices.
With the newest PRTG Version if i copy the URL from i must Login again in each new IE tab.
So can i link the map URL in each of my devices?
...
Tue, 10 Jun, 2025 at 8:50 PM
Hello,
I have setup a WMI Custom String sensor to grab the hostname from a cluster interface (to identify the current physical host).
When I first create the sensor, it initially receives the correct string response and the result it ...
Tue, 10 Jun, 2025 at 8:50 PM
