kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Good afternoon Paessler. I am using the gettreenodes api call to produce weekly reports on the status of our sensors however am having issues calling this remotely as it does not appear to accept &username=&passhash authentication w...
Tue, 10 Jun, 2025 at 8:57 PM
Under Message Tab->Binding column...is it possible to just display one or two line of messages instead of 7 or 10 per trap?
Thanks.
Article Comments
Hello,
Thank you very much for the KB-Post. I'm very much afraid tho...
Tue, 10 Jun, 2025 at 8:57 PM
Good day,
How can I configure a sensor for a computer to telnet to another external computer with a special port.
This is to verify that the vpn connection is working correctly.
By rules, it can only be that particular computer. Because I...
Tue, 10 Jun, 2025 at 8:57 PM
We recently created a PoP in the Asia region (Singapore).
Of course we monitor everything there as well.
For this, I've set up another (separate) PRTG cluster.
We planned to upgrade our PRTG installations this week.
When going to ...
Tue, 10 Jun, 2025 at 8:57 PM
For rollouts or installations it would be fine to import a list and get a message if an triggger goes to status "ok"
Article Comments
Hi Robert,
The state trigger allows you to set a When condition clears after a no...
Tue, 10 Jun, 2025 at 8:57 PM
Hello everyone,
While adding sflow sensor to prtg server, I have noticed that sflow started showing data before I even configure it on Juniper ex3300 switch. Can anyone please explain this behavior ??
Regards,
Article Comments ...
Tue, 10 Jun, 2025 at 8:57 PM
Is it possible to send notifications on every trap with error? Not by velocity or other aggregated values.
Article Comments
Hello,
Thank you for the KB-Post. It comes down to the architecture of PRTG. Which is based on numeric...
Tue, 10 Jun, 2025 at 8:57 PM
Hi,
we just defined a Netflow V9 with Top Desitination IP and DNS lookup.
What our customer is missing: to show which country is the destination ip/dns?
Like an additional RIPE lookup after DNS lookup.
The customer migrates from com...
Tue, 10 Jun, 2025 at 8:57 PM
Hi,
an idea for improvement from our customer, depending on multiple request in last weeks during implementing of PRTG and delegating responsiblities to his Teams:
Making Access to "My Account" easier:
Instead of "Setup...
Tue, 10 Jun, 2025 at 8:57 PM
Hi paessler, what does this mean and should i be concerned? It restarted dead in the middle of our busiest period and i want to make sure this doesnt happen again, we were running your since rolled back update and have since updated over th...
Tue, 10 Jun, 2025 at 8:57 PM
I have configured AWS accounts in prtg,which have EC2,Disk space and memory utilization sensors.i get 2 issue,
need to know the problem and permanent solution for these:
Whole prtg goes down,need to restart the server to work fine.
Eit...
Tue, 10 Jun, 2025 at 8:57 PM
hello,
I want to make a alert while my bandwidth goes to a limit or lets say if it goes more than 50 Mbps than make a alert can I make that with my snmp sensor as it contain multiple oid and I want that option with multiple OID. If not poss...
Tue, 10 Jun, 2025 at 8:57 PM
how can i monitor licenses (SQL, Veeam, Netapp, etc.) on a server? Is there a possibility to monitor things like that?
Maybe something like when the license expires or what kind of license is needed or if there is a license at all for sever...
Tue, 10 Jun, 2025 at 8:57 PM
Here is the write output from the Powershell script I am using. How does this need to be formed for PRTG to pick it up? I've tried looking at the other Questions and KB Articles, but I must be misunderstanding something.
Write-Host
&...
Tue, 10 Jun, 2025 at 8:57 PM
Hello,
if we have a group with defined devices and users to see only your information.
Is it possible to move this information (groups, devices, users and settings) to another core server?
Thank you.
Article Comments
Hello...
Tue, 10 Jun, 2025 at 8:57 PM
Hi Support,
Is it possible to schedule a maintenance plan which occurs every 3rd Sunday of the month at a pre-defined time such as between 02:00 to 02:30?
Also Schedule monthly occurrences such as every three weeks, once a month, etc., ...
Tue, 10 Jun, 2025 at 8:57 PM
Hello,
I am trying to monitor SSL certificate for self signed for linux server using "SSL Certificate Sensor".
Failed to establish secure connection [Step 0] Socket Error # 10060 Connection timed out. [Step 1] Socket Error # ...
Tue, 10 Jun, 2025 at 8:57 PM
Hello,
Having updated to the latest version of PRTG recently, the first thing I noticed was that mousing over a list of sensors would sometimes cause the selection box around the sensor to become too large. I'm not even sure why the s...
Tue, 10 Jun, 2025 at 8:57 PM
We use a Powershell-Script to determine some folder sizes on a machine because the builtin PRTG Sensor for folder size (using SMB) is too slow and can get the job done within the timeframe of 900s (maximum timeout). They are set at an inter...
Tue, 10 Jun, 2025 at 8:57 PM
Hello together,
in our server rooms we have several security cameras. We plan to display the video stream of the cameras on the prtg map. Which parameters do i need? Is it possible to display the MPEG-Stream?
PRTG-Version is 17.4.33.32...
Tue, 10 Jun, 2025 at 8:57 PM
Hello,
I have created a custom sensor to monitor the CPU process. It is running fine on CentOS 6.x however on CentOS Linux release 7.4.1708 (Core) we are seeing errors like: 0 % (Idle Percent) is below the error limit of 5 % in Idle Perc...
Tue, 10 Jun, 2025 at 8:57 PM
Hi , i installed last PRTG version 17.4.35.3441 , now Android App can't open any map with error "your web browser is out of date". I have last Chrome version installed on my phone and if i use PRTG from browser it works withou...
Tue, 10 Jun, 2025 at 8:57 PM
Hi, I'm trying to setup a Oracle query from the PRTG Core server. I have successfully ran some queries via Oracle DB but there's a couple of commands that I need to run using the sysdba account. However when I use the username "...
Tue, 10 Jun, 2025 at 8:57 PM
Hello all.
I need to setup a Oracle sensor do perform a query and analyze the result as a number. Currently I have Oracle Client 11g 32Bits at PRTG server and sensor configured as the manual states. Problem is I'm having credentials e...
Tue, 10 Jun, 2025 at 8:57 PM
Our sensor to detect Event ID 4732 from the security event logs (reveals an account was added to local admin group on a server) does not show User ID of the added account. It only shows the SID.
It does show the SID AND the UserID of the ac...
Tue, 10 Jun, 2025 at 8:57 PM
Currently no Geo Maps are working anymore in our PRTG. Nokia seems to be discontinued, and Open Street Map does not show anything.
How can we get Geo maps working again? Google is no option for us.
Version is: PRTG Network Monitor 17.1...
Tue, 10 Jun, 2025 at 8:57 PM
Good morning paessler and PRTGers
I am exporting lists of our paused sensors using
api/table.json?content=sensors&output=json&columns=objid,device,sensor&filter_status=7
And would very much like a column where it shows h...
Tue, 10 Jun, 2025 at 8:57 PM
Hi, I would like to monitor the queue for different exchange delivery type. It is very much like what the Queue Viewer on the native exchange server would display. IE I have a exchange server within the same AD at another location and I wou...
Tue, 10 Jun, 2025 at 8:56 PM
Hi,
I have disabled the polling for the root and any default groups. I have created a new device group and added in some device to ping, for now all I am after is latency for the devices in this group.
If I deselect the inherit from local...
Tue, 10 Jun, 2025 at 8:56 PM
Please allow SVG files to be used as map backgrounds. This would greatly improve the scalability (resolution independent) of large campus/cad-based maps, and reduce memory use.
Article Comments
Hi,
Interesting request - Javascr...
Tue, 10 Jun, 2025 at 8:56 PM
Hi,
first let me say that PRTG is one of the best piece of software I've the last years. It is genius.
But now to my problem. We run PRTG on several servers and monitor a lot of things right now. More to come. On my client I have in...
Tue, 10 Jun, 2025 at 8:56 PM
I'm using the historicdata API in order to retrieve one entry for the whole time interval in a day.
The request is as follows:
http://coreAddress/api/historicdata.xml?id=sensorId&avg=30600&sdate=2017-11-03-08-00-00&edate=...
Tue, 10 Jun, 2025 at 8:56 PM
We are using Managed Service account for SQL reporting services. I can't get my HTTP sensors to monitor them because they require a password in the password field of the sensor. You can't leave it blank. I was told I could create a ...
Tue, 10 Jun, 2025 at 8:56 PM
i am trying to use a span port ( on a cisco device that does not support netflow) and then sent this data with nprobe to a netflow sensor on prtg.
I see data coming in on the prtg server with wireshark on the port that the netflow sensor is...
Tue, 10 Jun, 2025 at 8:56 PM
I want to run a report automatically everyday. I want the report date range to be the last thirty days.
For Example today is Nov 30th. I want the report period to be Nov 1st - Nov 30th. Tomorrow I want the report period to be Nov 2nd - ...
Tue, 10 Jun, 2025 at 8:56 PM
Greetings to all. I am a beginner in the world on network monitoring. I have a question. I have installed paeesler and it has discovered my local netowrk. In the one host i have downloaded the text file from eicar that is being recognised a...
Tue, 10 Jun, 2025 at 8:56 PM
After installing StartSSL certificate on PRTG v.8. the core service didn't start,so we had to reset the certificate to the original one for it to work again.
The certificate looks fine, and we think we followed the instructions correc...
Tue, 10 Jun, 2025 at 8:56 PM
Hello Paessler, i am trying to build dashboards for our monitoring. I was wondering if you could tell me the file locations of your databases so i can bypass the api and pull this data direct.
Cheers
Sam
Article Comments
Hel...
Tue, 10 Jun, 2025 at 8:56 PM
Hi, I have a problem with some Custom EXE/XML sensor. I need to measure load time and bytes received for some web page, but the trick is, that every day I need to use other URL - so I can't just use typical HTTP Advanced Sensor and I wr...
Tue, 10 Jun, 2025 at 8:56 PM
I'm in the process of evaluation PRTG to replace our current system.
When I set up a new remote probe I would like to limit the scan to Windows servers only or disable the scan to add them manually.
Is this possible?
The reason is...
Tue, 10 Jun, 2025 at 8:56 PM
I would like to turn of the unusual low ping time warning on all devices. Where can I find the setting to do that?
Article Comments
Under Setup > System Administration > Monitoring you can customize the Unusual Detection ...
Tue, 10 Jun, 2025 at 8:56 PM
Hi I'm trying to create a way to monitor bandwidth inside our network,
I've got an edgerouter, i've enabled Netflow, downloaded and configured the sensor.
I'm getting all the destination ip addresses as 192.168.2.2, which is...
Tue, 10 Jun, 2025 at 8:56 PM
Hi Bro,
Can you share to us Api to Get cisco device model,ios version,ip address,location,serial number?
Many thanks
Article Comments
Hi there,
In case you are referring to those details as shown in tab "System Inform...
Tue, 10 Jun, 2025 at 8:56 PM
Hi, with which Sensor can i Monitor a free diskspace on my Synology Volume?
Thanks and Kind regards
Adrian
Article Comments
Hello Adrian,
Thank you very much for your knowledge base post.
To monitor the free disk spac...
Tue, 10 Jun, 2025 at 8:56 PM
I would like to see how to create custom map objects, code examples (HTML, CSS), and how to use these objects in the PRTG Map Designer. Can you provide sample codes for map objects?
Article Comments
This article applies to PRTG ...
Tue, 10 Jun, 2025 at 8:56 PM
hi, i has costume script xml, the xml contains few channels and text messege.
I wonder if it's possible to go down a line in the text section.
(the sensor text is my error messeges, and its can be more than 1 error)
thanks!
Arti...
Tue, 10 Jun, 2025 at 8:56 PM
Hello- I have my F5 MIB files (F5-BIGIP-LOCAL-MIB) and want to setup a SNMP library sensor to show current connections to pools.
I currently get error 'PE049' when attempting to add the sensor using the library (OIDLIB) i created ...
Tue, 10 Jun, 2025 at 8:56 PM
I want to setup multiple vCenter devices for the same vCenter server using different credentials that are only allow to see a part of the whole vCenter setup (e.g. one sensor for european VMs and one for asian VMs).
I arranged my vCenter...
Tue, 10 Jun, 2025 at 8:56 PM
Hi,
Is there some form of 2FA that can be added in for PRTG? If we're to expose it to the internet, I'd like something other than a username + password
Any recommendations on a 3rd party integration or similar?
Thanks!
...
Tue, 10 Jun, 2025 at 8:56 PM
I'd like to check the installed Java Version on different Windows Server. There is a simple way to do it in a batch file:
java -version
To be able to use the output in PRTG I have a .bat file with the following content:
for /f &qu...
Tue, 10 Jun, 2025 at 8:56 PM
Hello,
when we delete a sensor or monitor device, how is that information erased from the databases?
Or do we need to perform some purge procedure?
Thank you.
Article Comments
Hey Sandro,
Thanks for your KB-posting.
...
Tue, 10 Jun, 2025 at 8:56 PM
Hi,
In the management view, i can select multiple sensors using CTRL and selecting them by clicking. If i try to drag the group of selected sensors to another device, only one sensor will be copied. Is it possible to copy multiple sensors...
Tue, 10 Jun, 2025 at 8:56 PM
Hi guys,
Currently i'm doing POC and one of the requirement from the customer is enable telnet-ssh for the devices in the PRTG. I want to know how to enable it. I followed the knowledge base but it's not working. So, can you guys ...
Tue, 10 Jun, 2025 at 8:56 PM
We are currently using PRTG to monitor our enterprise environment and are looking to improve certain areas - specifically alerting to lower notification "noise".
We have made the specific decision to do all alerting from librari...
Tue, 10 Jun, 2025 at 8:56 PM
Hello,
is there any feature that demonstrates PRTG performance?
I want to know if the server is in good health to ensure the monitoring of the sensors.
Thank you.
Article Comments
Hi Sandro,
Please send us a screenshot o...
Tue, 10 Jun, 2025 at 8:56 PM
Are there any additional costs from a licensing perspective if we want to run your software on an EC2 instance at AWS and is this something that is supported?
Article Comments
Hello there,
In case you're not referring to o...
Tue, 10 Jun, 2025 at 8:55 PM
Hey
I am keep on getting Class(es) not found: "Win32_PerfRawData_LocalSessionManager_TerminalServices" (code: PE235) with my WMI Terminal Services (2008+) sensors, every time the issue occurs i am verifying that this class is wo...
Tue, 10 Jun, 2025 at 8:55 PM
I'm attempting to create a new auto discovery group and use the AD as the source. However, I'm getting the following error:
Error (Bad Request)
The validation of at least one of the new objects failed because of the following:
...
Tue, 10 Jun, 2025 at 8:55 PM
Hi,
I recently added the syslog sensor to my PRTG install. I have one device sending Security Policy logs to it now. The problem is that the Probe Health keeps disconnecting. I think it's anytime i try and search through the syslog da...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
during the upgrade process is it necessary to stop the system altogether?
Is there an alternative for the environment to remain available during the upgrade process?
How long does it take to upgrade to 3500 sensors?
Thank you...
Tue, 10 Jun, 2025 at 8:55 PM
I'm using the SSH Disk Sensor and I'm trying to add a filesystem to be monitored.
So I have a device with one sensor to monitor the system's mount points. (/, /usr, /var, /tmp, etc...) and
one sensor to monitor the application m...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
How do I configure the retention of the monitored information in the database in the database?
Thank you.
Article Comments
Hi there,
You will find these settings within the Webinterface under Setup > System Admin...
Tue, 10 Jun, 2025 at 8:55 PM
Hi, I'm have a problem with ptrg on mikrotik router, my oid PPP interface is changed after down and if this interface PPP up again the sensor still mark red in graphic, how I can solve for OID changed dynamically?
Sorry for my bad eng...
Tue, 10 Jun, 2025 at 8:55 PM
Hi There,
I try to trigger a notification for PortSecurity-Violations.
I´ve installed the MIB-Files for my Switches and everything looks fine in the Sensor: https://i.imgur.com/nzVMGMh.png
This is the Trap I´m looking for: http://ipmsup...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
we need to extract PRTG information for our BI.
How can we do that?
Thank you.
Article Comments
We have a few ways with out API to export data as CSV or XML.
Please go to Setup -> PRTG API in your webGUI. Clic...
Tue, 10 Jun, 2025 at 8:55 PM
Hello.
I have a little issue with a remote probe I have set up on my computer at a customer site.
They have dsl, so on the computer I found what the IP address was, and confirmed I could ping my local probe's outside address.
Then I...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
Is there a report that shows how many sensors are used?
Our concern is that due to the limitation of licensing, some sensor stops working.
Will the PRTG tell us that we have sensors beyond the limit of the limit?
At what time...
Tue, 10 Jun, 2025 at 8:55 PM
Hi, i have a discovery group and need export a list of devices. How can i do?
Article Comments
Hi there,
In order to retrieve the CSV file, simply connect to your PRTG webinterface via a webbrowser, login and change the URL ac...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
When I add a new device from a remote probe, device monitoring is performed by this remote probe.
However, when I move the group between remote probes or move the device between remote probes, will the monitoring be done by the r...
Tue, 10 Jun, 2025 at 8:55 PM
hello,
i have updated my certificate as described here
https://https://helpdesk.paessler.com/en/support/solutions/articles/76000045249#reply-713
then i import the certificate as described here
https://www.paessler.com/tools/certificateimpor...
Tue, 10 Jun, 2025 at 8:55 PM
I have a set of routers that send their netflow v9 logs to a log server. The log server forwards the logs to PRTG (one IP as the sender). is it possible to create a sensor for each router based on a field in the logs (or any other identifyi...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
After we installed the PRTG, we automatically visualized that the users of my domain were listed to be included in the group.
But I want to use users of my child domain and not my primary domain.
Is there any option for me to d...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
Is the communication used between the core server and the remote probe in a scenario where the communication will be performed via the Internet is encrypted?
If the answer is yes, does it mean that they communicate with PRTG inte...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
For installing remote probe is it necessary to be admin?
My need is to provide a common user access to the end user to install the remote probe and later, to include the devices.
Thank you.
Article Comments
Dear san...
Tue, 10 Jun, 2025 at 8:55 PM
Hello,
We made the change of the communication port of the core server with the remote probe to use port 443, but it says that there is a conflict with the web server port.
We would like to use this port because they are usually freed i...
Tue, 10 Jun, 2025 at 8:55 PM
I have a custom sensor returning a couple of channels.
For a clearer image, the structure of a channel is the following:
<result>
<channel>server0</channel>
<value>100</value>
<Unit>Percent</...
Tue, 10 Jun, 2025 at 8:55 PM
We have multiple ESX in use.
On the ESX we have the Hardware, Performance and Datastore Sensor in use.
Additionally the sensor, if the VM is up.
In our Device-List we have also the VM as Server monitored.
Devices
ESX1
VM1 only up S...
Tue, 10 Jun, 2025 at 8:55 PM
Is it possible to set the "Computers up to date" channel in the WSUS Statistics sensor to be a percentage of the "Computers registered" --so basically use "computers registered" as a variable for the max number...
Tue, 10 Jun, 2025 at 8:55 PM
I want to add a simple Textbox to a map to explain the coloured icons on it.
Article Comments
In the map editor, under Custom HTML, there's an object called "Custom HTML Element".
Simply drag it on the map.
...
Tue, 10 Jun, 2025 at 8:55 PM
When I drag a Custom HTML element to a map, so I can add some text, I can't add any HTML to the object. All I get is the BringToFront/SendToBack/Delete/DropConnections icons on the object.
Thank you - Walter
Article Comments ...
Tue, 10 Jun, 2025 at 8:54 PM
Hi.
So far I was using a Python Script Advanced Sensor to query certain details from our product providing a special API. Now we extended our API to also provide data via HTTP in PRTG API conform format. I have now hundreds of existing pyt...
Tue, 10 Jun, 2025 at 8:54 PM
Hi,
We need to monitoring a company with 4 remote offices. We don't have VPN connection between the diferent sites. Its possible to configure remote probes on 4 of the remote sites, and put them sending information to the Core Server al...
Tue, 10 Jun, 2025 at 8:54 PM
Hello,
I want to edit a ticket thru the API, however, I can't find any documentation about it. Could somebody please clearify this to me ?
Thanks,
Peter
Article Comments
Hi Peter,
Unfortunately, Tickets can only be mo...
Tue, 10 Jun, 2025 at 8:54 PM
Recently I Integrated My PRTG with AD server. It was successful. I am able to create new user group, which are replicating with AD.
Now issue is that i am unable to integrate/ replicate the existing user groups of my prtg with AD, please he...
Tue, 10 Jun, 2025 at 8:54 PM
I've noticed since upgrading our PRTG installation to V17.4.35.x from the older 17.3.33 version and UI we've lost the ability to clone a library.
Has the functionality been moved or removed ?
Article Comments
Dear ddom...
Tue, 10 Jun, 2025 at 8:54 PM
Hello, I setup an SMTP sensor to "Write sensor result to disk (Filename: "Result of Sensor [ID].txt")" Where can I retreive the log file ? The folder "\Logs (Sensors)" doesn't exist on our server.
Thanks a...
Tue, 10 Jun, 2025 at 8:54 PM
Hello,
I've a problem that sometimes the network response to the internet is slow. When I connect directly to the modem no problems but when the data travels throw the internal network its much slower. Normal internet pages have no pr...
Tue, 10 Jun, 2025 at 8:54 PM
Hi Guys,
I'm just new here and trying to learn to use PRTG, I have setup a lab environment which I want to test capturing traffic.
I have a cisco C3560E switch and a server with PRTG installed and running OK. On the Cisco switch I ...
Tue, 10 Jun, 2025 at 8:54 PM
Hi all
We have some troubles with the reports in PRTG.
1. When we create a report to PDF it splits at the page break a sensor on two sites. Not only the text, also the graph.
How can we avoid, that the page break will split the sensor ...
Tue, 10 Jun, 2025 at 8:54 PM
How much downtime does it take to update from version 17.3.33.2830+ to Version 17.4.35.3441?
Article Comments
Dear saqeeb,
the update usually takes some minutes. It is likely that after he installation, a reboot is performed, ...
Tue, 10 Jun, 2025 at 8:54 PM
Hi,
I have a http-sensor advanced, which stores every minute a value. I want to have some historical data in my report with another time frame, i.e. 15 minutes or an hour.
The problem is that the data then Always is calculated as averag...
Tue, 10 Jun, 2025 at 8:54 PM
I would like to make a report that shows all the 'disk free' sensors that are either in warning or error.
We have a ton of servers here, and a lot of them are showing warnings for disk space.
I would very much like to do something a...
Tue, 10 Jun, 2025 at 8:54 PM
Hi. Is it possible to preprocess notification text before actually sending it by e-mail, using Powershell script, for example? I need to get the snmp trap message from %traperrors placeholders and send it to the recipients.
Article ...
Tue, 10 Jun, 2025 at 8:54 PM
I did not see an XML tag for spike filtering under PRTG API \ Custom Sensors.
I'm trying to have my powershell script XML output automatically set a spike cap on the "speedometer" graph for each channel, rather than me needing...
Tue, 10 Jun, 2025 at 8:54 PM
PRTG Version 17
Device: Liebert GXT2 UPS with SNMP Card
We can create SNMP sensors related with Ethernet interfaces, and works fine
But when we want to use library sensors (from importing Liebert GXT mib file) or using some OID retrieved ...
Tue, 10 Jun, 2025 at 8:54 PM
Hello,
can I use Apache Webserver as SSL Proxy to calls PRTG as context of a domain?
Example:
https://mydomain.com/prtg -> https://ipofprtgserver
I only found guides for Apache and PRTG as subdomain.
Best Regards
Christian
...
Tue, 10 Jun, 2025 at 8:54 PM
Hi,
We use PRTG http api to get channel data, but datetime_raw is the time of app run not PRTG sampling time (interval is 60s). It is bug of PRTG HTTP API?
Here is the uri : https://prtg.myorg.tw/api/table.xml?content=channels&output=...
Tue, 10 Jun, 2025 at 8:54 PM
I have set the Netflow udp port 9995 on ASA via ASDM, and created the new Netflow V9 sensor, and define the same port,
Sender IP is ASA, active flow timeout 10mins, samling rate is 1 min as the same settings on ASA.
But this sensor always...
Tue, 10 Jun, 2025 at 8:54 PM
Hello paessler,
Could you please give me a little help with compiling a report of devices/sensors that we have but are not configured to have notification limits?
Thanks!
sam
Article Comments
Hi Sam,
There's a 3rd ...
Tue, 10 Jun, 2025 at 8:54 PM
I'm using the Customer Fortigate Health sensor and I would like to be able to monitor the state of a VPN but no alert if it goes down. The reason being is that these are often backup or resilient VPNs are aren't always up. It isn...
Tue, 10 Jun, 2025 at 8:54 PM
