kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I have a Cisco AP1242AG AccessPoint which I want to monitor with PRTG.
So I downloaded the concerning MIB-Files for the AP here:
ftp://ftp.cisco.com/pub/mibs/supportlists/c1240/c1240-supportlist.html
First of all I need to know which ...
Tue, 10 Jun, 2025 at 2:41 PM
Hi, I've just intalled the evaluation copy of PRTG, I just want to know the topology for the installation in my particular case.
I have a LAN-LAN link between my corporate offices and a warehouse, as it is a lan-lan link I don't hav...
Tue, 10 Jun, 2025 at 2:41 PM
Within EC2 there is the ability to create custom metrics from your instance that can be monitored in CloudWatch. Is there a way to get these additional metrics(disk space utilization, etc...) setup as channels for my AWS sensors?
Ar...
Tue, 10 Jun, 2025 at 2:41 PM
Hi all,
I need to know 2 things in the Map Desinger area:
1. If I add a geo map, how can i show multiple devices on it?
2. I am using live graphs (small Fonts) to monitor response times of SQL queries. Often these queries take longer ...
Tue, 10 Jun, 2025 at 2:41 PM
I would like to mass remove sensor types from devices that I do not find useful
is there a way to do this?
for instance - remove all IIS Sent Files Sensor from all webservers
Article Comments
Hi,
you can select sensors by t...
Tue, 10 Jun, 2025 at 2:41 PM
Hi
I need to create a sensor that monitors the directory / VAR on a Linux server.
How do I?
Article Comments
Hi,
what precisely do you want to monitor in /var? The size?
Best regards
Oct, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:41 PM
Does it means that the websever being monitored must return data like [].If so ,the http content sensor is not flexible.
If not can you show me an url that could be used to "http content sensor",thanks
Article Comments
...
Tue, 10 Jun, 2025 at 2:41 PM
The system being monitored only has two partitions/drives (Windows Server 08) along with a USB drive currently attached as well as hidden boot/testing/recovery partition. PRTG however is reporting 8 Disk, C:, D:, F:, M:, N:, Q:, X:, Z:. Of ...
Tue, 10 Jun, 2025 at 2:41 PM
Hello,
we maid a custom ssh script to test a process's memory :
-------------------------------
PROC=$1
GROUP=$2
if [ $PROC = j2ee_PD900 ]
then
CPU=`ps auxww | grep $PROC|grep $GROUP|grep -v grep | awk '{print $3}'`
else
CPU...
Tue, 10 Jun, 2025 at 2:40 PM
Hello,
I want to create a system image so that I can simply distribute the same system to mulitiple, like more than 100, machines. After applying the image, PRTG probes should have different GID in order to monitor them. How can I configu...
Tue, 10 Jun, 2025 at 2:40 PM
After upgrade to version 12.3.1.2420 (new sensor for blacklist), I have problems with various blacklist server (zen.spamhaus.org, b.barracudacentral.org, ...).
Errormessage: Error checking zen.spamhaus.org, Der angegebene Host ist unbekan...
Tue, 10 Jun, 2025 at 2:40 PM
Seems that when running various versions (11.2R7.4 and 11.4R4.4, so far) on a 240H cluster, SNMP doesn't work properly and starts spitting out 'noSuchObject' errors on perfectly valid queries like when querying the interfaces MI...
Tue, 10 Jun, 2025 at 2:40 PM
There is a need to change default generated sensor's names (([port]) [ifalias]) to another format (([ifname]) [ifalias]) without renaming it manually.
Parameter "Port Name Update" was changed to "Automatic sensor name upd...
Tue, 10 Jun, 2025 at 2:40 PM
Hello,
I have looked in the manual and on the website, but cannot find an answer.
Is authentication via TACACS+ supported for logins to the PRTG Network Monitor , and if not, is it in the pipeline for future deployments?
Thank you
...
Tue, 10 Jun, 2025 at 2:40 PM
Suddenly our HTTP sensors start showing errors even though the page behind it is fully available, they didn't show this during busy times at night when there is more trafic. RAM/CPU aren't close to their max and theres nothing in th...
Tue, 10 Jun, 2025 at 2:40 PM
i have installed the remote probe but my qos on core server did not detected whats seems to be the problems
Article Comments
Hello,
please upload some pictures showing the issue.
best regards.
Oct, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:40 PM
I believe the best way to send data from my probe-computer-situated program to the probe software is sending of Windows messages.
My program receives data from a USB-thermometer and sends that data to PRTG.
Why shoud I build SNMP server? Wh...
Tue, 10 Jun, 2025 at 2:40 PM
I get the following error "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"
Article Comments
Windows and Weak Certificates
The Windows Update KB2661254 disa...
Tue, 10 Jun, 2025 at 2:40 PM
I would like to change the src parameter of the historical graphs that are generated to use absolute paths instead of relative.
For example:
Changing the following line -
<img class="prtgchart load" onload="$(this).r...
Tue, 10 Jun, 2025 at 2:40 PM
I need to post xml to a webpage to get a result. But I'm not allowed to enter the XML POST data, because it contains < and >.
Is there a way around this?
Article Comments
Hi,
this is not possible in the actual stabl...
Tue, 10 Jun, 2025 at 2:40 PM
Can I manage AD Source in PRTG to see Active Directory User Logon Reports?
I'm concerned to see hsitory of users logged through AD Account on a network?
Article Comments
Hello,
I'm sorry this is not possible with PRTG....
Tue, 10 Jun, 2025 at 2:40 PM
I recently changed the DNS and IP on the server running PRTG, so now the old account I had setup in iPRTG is useless, and had to create a new account with the new settings. And I'm unable to remove/delete the old account off my iPRTG a...
Tue, 10 Jun, 2025 at 2:40 PM
I need to chek run services in my server for ex. httpd service, and the state of services will be shown in a dashboard. Is snmp can be used to monitor services? and how to configured the snmp?
thanks.
Article Comments
Hi,
assu...
Tue, 10 Jun, 2025 at 2:40 PM
I am monitoring a number of VMware hosts with PRTG (build 12.3.3.2855). The VMware devices are monitored by a remote PRTG probe in the same site (and IP subnet) as the VMware hosts.
I am decommissioning the server the PRTG probe is insta...
Tue, 10 Jun, 2025 at 2:40 PM
My environment has multiple vCenter servers, with each vCenter instances having 4-7 ESXi hypervisors, and each vCenter instance has about 50-100 guests.
I can detect all of the vms from my probes, and I can monitor them individually, but ...
Tue, 10 Jun, 2025 at 2:40 PM
Hi there,
I've been using PRTG to monitor a reasonably large network which is growing at a fast rate. Every week we add more devices to PRTG as were notified however every month when we go through the network with a fine comb and disco...
Tue, 10 Jun, 2025 at 2:40 PM
I have a need to monitor an IP address at a DR site. By default this IP is unreachable unless the main site goes down (through the magic of BGP routing).
I'd like to have a "negative" ping sensor that is green when there...
Tue, 10 Jun, 2025 at 2:40 PM
I'm trying to add SNMP sensors to an APC UPS device from "SNMP APC Hardware" sensor type when I receive the error shown above in the lower right corner of the screen. This error occurs whether I attempt to add the sensor throu...
Tue, 10 Jun, 2025 at 2:40 PM
I have multiple traceroute sensors in the error state "Timeout caused by wait for mutex (code: PE035)".
This is a surprise because these are not custom/exe sensors, but the standard traceroute sensor provided in PRTG. I can'...
Tue, 10 Jun, 2025 at 2:40 PM
How i'm able to create a DOWN Sensors XL data table?
I want to create a map to our big TV in our department, but i cant find DOWN Sensors XL and WARNING Sensors XL.
How to create a XL object? Or how to edit the existing?
Any suggest...
Tue, 10 Jun, 2025 at 2:40 PM
i have some url then i enter him i get notification to download some file.
how can i monitor thet this file start downloading?
Article Comments
Hi,
you might use the HTTP Advanced Sensor and point the same directly to the file ...
Tue, 10 Jun, 2025 at 2:40 PM
I have a single computer (my personal laptop).
the search function never completes (get continuous circles)
showing searching monitoring database, objet id, documentation.
It does the same in ie, chrome, or firefox.
It works on all othe...
Tue, 10 Jun, 2025 at 2:40 PM
Hi,
I have successfully added a new Linux device, configured SSH with public key authentication, and added a few SSH-based sensors (meminfo, load average, etc).
The sensors were responding successfully but then for operational reasons I...
Tue, 10 Jun, 2025 at 2:40 PM
How do you configure the cloudwatch sensor to monitor a RDS database?
I have entered the AWS access ID and secret access keys, selected the Relational Database Service (RDS) from the list of options, selected the correct region, and enter...
Tue, 10 Jun, 2025 at 2:40 PM
Since upgrading from 12.2.2.2211 to 12.3.1.2420 we now see more information on the WMI Print Queue Sensor than previous, which is great - however, we are now seeing many printer sensors show as down for being low on toner, out of paper, etc...
Tue, 10 Jun, 2025 at 2:40 PM
Hello,
I've seen "path-jitter" in Cisco IP-SLA is supported in V8.3 and set up the trial version of v8.3 before upgrading our production server, but PRTG v8.3 doesn't automatically pick up the type of operation and only ...
Tue, 10 Jun, 2025 at 2:40 PM
I am looking to upgrade from Version 8 to Version 12. Will my license stay the same?
Article Comments
Yes, it will.
Oct, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:40 PM
We need to upgrade from 9 to 12, kindly tell will this be a free upgrade or paid.
Article Comments
Hi,
the update is free when you have valid maintenance. You may check the same in your customer account.
Best regards
Oct, ...
Tue, 10 Jun, 2025 at 2:40 PM
Hi,
I´m reading the bandwith information on my ASA 5510 8.2.(5) outside interface with snmp and when I take historical data for the last 24 hours I see a total volume of 7.6Gb.
I also send netflow (9) data from my ASA to PRTG with a ACL...
Tue, 10 Jun, 2025 at 2:40 PM
After upgrading to 12.3.3.2855 every one of our printer sensors shows as "down" with the following message - External EXE/Script did not return a response (code: PE087.) This was not a problem and all was working prior to upgrade....
Tue, 10 Jun, 2025 at 2:40 PM
Testing out Hyper-V 2012 and added a hyper-v vm sensor - it detected the 1 vm I have on the 1 host but returns "The specified class is not valid".
Is this a 2012 thing? Works fine with my 2008r2 Hyper-V servers.
Thanks!
-Andr...
Tue, 10 Jun, 2025 at 2:40 PM
Hi All,
I am planning to give access to customers to their devices. The dashboard should have 2 days and Live data report of all the senseors.
Am trying to configure MAPS to provide only dashboard related to those groups ( Where the cus...
Tue, 10 Jun, 2025 at 2:40 PM
We have SNMP installed and configured on Ubuntu systems, we can use the Paessler SNMP lib to monitor via SNMP. However, this lib only monitors the total and used disk space, and we want to know the total free space straight away. So we cho...
Tue, 10 Jun, 2025 at 2:40 PM
PRTG couldn't trace MySQL Data using SQL-Expression which from Linux OS (Centos).
Hook up to Windows based MySQL, PRTG is able to track MySQL but not in any Linux platform. However, PRTG is able to track SNMP traffic without an issue. ...
Tue, 10 Jun, 2025 at 2:40 PM
Greetings,
Would it be recommended for the PRTG login screen to be public facing on the Internet? I would imagine this is not recommended but wanted to see what the official stance is on this, if people often do it, etc.
Article ...
Tue, 10 Jun, 2025 at 2:39 PM
Hi,
We are now working with PRTG 6 and we are purchased the PRTG 9. In PRTG 6 we have the url of PRTG visible for users only in http://192.168.x.x:80. In PRTG 9 we try the same, but always appears the login page. It's possible to elimin...
Tue, 10 Jun, 2025 at 2:39 PM
Hi,
We want to design a PRTG infrastructure, we want to monitor a lot of servers (150 to 200 servers). Because we want to have a redundant(failover) architecture we can only use 1 core and 1 failover server. Because of the 3GB limitation ...
Tue, 10 Jun, 2025 at 2:39 PM
The sensor dependency setting is great if you want to pause sensors based on another sensor going down. However, I want to do it the other way around!
I am using an HTTP sensor to check the status of a web server and if it goes down I wa...
Tue, 10 Jun, 2025 at 2:39 PM
Can I create a sensor which would take two numbers from custom SSH script and draw them both in Live Data?
For example, I want to monitor Asterisk server, and I want to see in one graph both SIP and IAX peers online.
Article Comment...
Tue, 10 Jun, 2025 at 2:39 PM
Where there is a remote probe could Paessler add an option where at a specified time every day the core server generates 3MB (suggested value) of traffic to the remote probe. On completion the remote probe then generates a similar traffic b...
Tue, 10 Jun, 2025 at 2:39 PM
I have an Lancom 1711+ that i like to read out using the SNMP protocol. I tried almost anything but i do not get the Lancom to use with SNMP. i already downloaded the MIB file and converted it to the oid file and imported this in the PRTG ...
Tue, 10 Jun, 2025 at 2:39 PM
why does the tray icon blink greeen where there are no alerts, no todos, and no log enties. i've even set the tray not to blink unless there is an alert. please advise.
Article Comments
maybe there are new ToDos?
Oct, 20...
Tue, 10 Jun, 2025 at 2:39 PM
I have a campus area network with 10 Ubiquiti Stations served by a common Access Point. All Stations receive signals in the -56 to -70dbm range.
Several of the "best" signal Stations hiccup 1-2 times a day with a SNMP -2003 err...
Tue, 10 Jun, 2025 at 2:39 PM
Guten Tag,
Wir benutzen bzw. testen die free Version mit 50 sensoren. Darunter auch den syslog sensor für einen einen WLAN Controller zur Überwachung. Dort werden syslog Meldungen zur überwachung an einen server übermittelt wo darauf prtg...
Tue, 10 Jun, 2025 at 2:39 PM
hello
trying to set up qos one way sensor between 2 different lans in out network
there are routers, fw and different vlans between the core to the remote probe.
while using the recommended parameters of 1000 packets, 20ms between 2 packets...
Tue, 10 Jun, 2025 at 2:39 PM
Unable to install Licence key due to the the key area being greyed out.
it was previously setup using 30 day trial.
what do you recon
Article Comments
Hi,
please log in to our Customer Portal and download the latest commerc...
Tue, 10 Jun, 2025 at 2:39 PM
PRTG is installed on a windows server 2008 R2, and I am monitoring a linux (centos 5) device for load, meminfo and diskinfo. I am using private key to authenticate and have used the method described here : https://www.paessler.com/knowledg...
Tue, 10 Jun, 2025 at 2:39 PM
In the last few revisions of PRTG, my public maps no longer load. The browser sits at "loading ... (0S)" and the map never appears. This is happening on 2 installations based out of alternate datacenters, one of which is a fresh...
Tue, 10 Jun, 2025 at 2:39 PM
I am planning an update of my PRTG 8 to PRTG 12. For this I installed a new server (actually test server) which I would then take productive when all tests are done. The actual (old) server will then be removed.
As actually my test serve...
Tue, 10 Jun, 2025 at 2:39 PM
Im part of an MSP providing monitoring services for a series of clients. Ive got the web portal set via the guides for CSS. Id like to use the Enterprise console for system demos, but the PRTG logo slapped all over the interface. Do you ...
Tue, 10 Jun, 2025 at 2:39 PM
We are using PRTG v9 with Remote Probes also on Windows Server 2008 R2, now we would like to upgrade to v12. For this, we evaluating the upgrading-process on non-productive Systems.
The Core Server is still updating well, also the remote P...
Tue, 10 Jun, 2025 at 2:39 PM
When I enable net flow for multiple router using the same UDP port 9993 the collection stops to work, once I change the port of one of the routers to 9994 the collection resumes.
Christian Lamparth
Article Comments
Hello,
doe...
Tue, 10 Jun, 2025 at 2:39 PM
When trying to diagnose a problem I often try to compare several sensors. For example, several ping graphs, a jitter and traffic sensor etc.
If there was some method to drag several sensors onto a "compare" button or something s...
Tue, 10 Jun, 2025 at 2:39 PM
Upgraded to stable 64 bit version and am running on Windows 2008 server 64 bit. It appears that the PRTG console becomes unresponsive after some time and it is consuming almost all available memory on the server. When we restart the Core Se...
Tue, 10 Jun, 2025 at 2:39 PM
I have read some of the other questions but still not found an answer,
I am looking to capture Jitter on my PRTG and I have setup the router as required but I am unable to get PRTG to capture the traffic on my Cisco 2911.
I am running ...
Tue, 10 Jun, 2025 at 2:39 PM
Hi,
i'm trying to get get PRTG to execute a Powershell Script to return the number of unregistered XenDesktops. The Script is working without PRTG but wihin PRTG i only get an error message. The weird part is that the Error Message ev...
Tue, 10 Jun, 2025 at 2:39 PM
We are currently using PRTG Network Monitor 2500 and ran out of sensors. what are the costs to upgrade?
Article Comments
Please contact sales@paessler.com to get a personalized quote.
Oct, 2012 - Permalink
Tue, 10 Jun, 2025 at 2:39 PM
what in shoot ptrg , its showing icmp message in , icmp messge out sensors ,
how to use this sensors to rectify network problems
Article Comments
What precise sensor are we talking about? ICMP is a protocol, part of the Inter...
Tue, 10 Jun, 2025 at 2:39 PM
Any new AD user cannot login to the PRTG WebUI. Is there a way to fix this?
Article Comments
Hello,
just to check, the according Active Directory user group is linked with a PRTG User group already, and a newly added user (in...
Tue, 10 Jun, 2025 at 2:39 PM
Hi,
I'd like to do 2 feature request for prtg.
1. Network device backup feature, atleast Cisco, HP, Extreme, Juniper and H3C (Now HP).
2. Better map creation (ex. Zappix) and maybe possibility export/import from/to Visio.
Regads...
Tue, 10 Jun, 2025 at 2:39 PM
Hello,
I need to reset the values ??of some sensors within a particular period.
I have to cancel the false down that distort the historical reading.
You can enter special commands with a value in the database?
If so, how?
Thank you,
bes...
Tue, 10 Jun, 2025 at 2:39 PM
i wanted to know i put the sensor and the max disk space limit come to 100% so sensor stop check other chanel's, so can i stop for a while check this chanel, so i will know if maby chanel of cpu failed or some other chanel?
Art...
Tue, 10 Jun, 2025 at 2:39 PM
Hello everyone,
I need monitor my Switch CPU load of the 3Com Baseline Switch 2948-SFP but I don't know what is the OID Mib for this issue.
I've tried with auto-discovery but doesn't work.
anybody does know about what is ...
Tue, 10 Jun, 2025 at 2:39 PM
I want to be able to specify 90% width and 75% height for a map.
Is this possible?
Article Comments
Hi,
may you please elucidate? 90% and 75% of what?
Best regards
Oct, 2012 - Permalink
When the map is to be viewed in ...
Tue, 10 Jun, 2025 at 2:39 PM
I want to monitor the bandwidth coming out of multiple switches using a custom map.
The idea is to monitor every port for each switch using a graph and always display the highest utilized port first.
so for example i have a 24 port switch a...
Tue, 10 Jun, 2025 at 2:39 PM
Is there any way to get the list of sensors that use a certain notification.
thanks,
John.
Article Comments
Hi,
I'm afraid this is not possible exactly. You may use the cross reference function of PRTG but this will only ...
Tue, 10 Jun, 2025 at 2:39 PM
After the update to the most recent version of PRTG iam getting this error:
Connection with PRTG Server has been lost.
URL:/api/public/testlogin.htm failedtwice(PE1114,timeout,timeout)
Iv tryed to find out what is going on in the logs...
Tue, 10 Jun, 2025 at 2:39 PM
1. Updated to version 12.4.5.3165. (10/30/2012 1:44:11 PM)
2. Windows sensors (against windows server 2008 R2 web edition) stopped to work (no changes have been made on server that we monitor)
with the message
Connection could not be esta...
Tue, 10 Jun, 2025 at 2:39 PM
The answer at https://kb.paessler.com/knowledgebase/en/topic/22323-how-do-i-wildcard-the-device-ip-name-in-an-http-advanced-sensor-s-url#reply-65683 states that if you use http:/// the name of the device will be used in the sensor url, but ...
Tue, 10 Jun, 2025 at 2:39 PM
I am switching my configuration to a, hopefully, "pure" Active Directory driven setup (running 12.3.3.2855 for now will be updating to the latest build shortly). The problem I am encountering that notifications are not being send...
Tue, 10 Jun, 2025 at 2:39 PM
I want to clone the same sensor across 5 different servers (nodes in a load-balanced cluster). Each server is configured as a device.
What I basically want to do is create an HTTP Transaction sensor that uses URLs like:
http://www.mysit...
Tue, 10 Jun, 2025 at 2:39 PM
i would like to find out if anyone is plugging in their personal devices in my network using prtg. is that possible.
Article Comments
what exactly do you mean by
plugging in their personal devices in my network
Nov, 2012 ...
Tue, 10 Jun, 2025 at 2:39 PM
I was logged in PRTG with my active directory credentials and I changed the default password yesterday, about an hour later the IT team received the following email "[PRTG Network Monitor (PICUT001)] New Todo: Web server is slowing dow...
Tue, 10 Jun, 2025 at 2:39 PM
I really like this software, and the freeware version suits my needs. I would just like to know if these default senors count against the limit (I'm currently in trial mode), and if they do, how can I delete them?
Article Commen...
Tue, 10 Jun, 2025 at 2:39 PM
Hello,
Version 12.4.5.3165 introduces 64 bit core server.
How do i upgrade from an existing 32 bit server to 64 bit (with a running cluster)?
Thank you,
Oren
Article Comments
Hi,
please make sure the servers (every cluster no...
Tue, 10 Jun, 2025 at 2:38 PM
One of our sensors are working, but no others will.
Can someone provide the walk-through of how to set them up?
Also is there a way to change the smtp server that the email is sent from?
Article Comments
Hello,
we actually cov...
Tue, 10 Jun, 2025 at 2:38 PM
I want to use the PRTG Network Monitor to indicate whenever a new warning or error enters the log. I simply want to have any new errors or warnings (it's a small organisation) show up on the Dashboard.
Because I need total events not ...
Tue, 10 Jun, 2025 at 2:38 PM
I configured snmp version 3 on my layer 3 switch. On Paessler, I use "Automatic sensor creation using specific device template(s)" to setup my sensors. I noticed that it pulled all the interfaces from my device (SNMP agent) and li...
Tue, 10 Jun, 2025 at 2:38 PM
Gibt es grundsätzlich die Möglichkeit die "alten" historische Daten (Statistiken) der "alten" Sensoren auf "neue" Sensoren zu übertragen, da beispielsweise öfters die MIB Datei (Library) angepasst werden muss. ...
Tue, 10 Jun, 2025 at 2:38 PM
I have been setting up Custom SSH Script/Sensors for our Linux boxes. The documentation and example are great, most scripts are running perfectly. I have run into an issue when trying to set the return value using a variable, for example:...
Tue, 10 Jun, 2025 at 2:38 PM
I have two nearly identical Del PowerEdge T410s. I installed OpenManage, and setup SNMP on both of them, the configurations are identical. On the first one I was able to add Dell Hardware sensors without a problem, on the second one I keep ...
Tue, 10 Jun, 2025 at 2:38 PM
Hi
We have a number of APC UPS's, including a Smart-UPS 5000RT and a Symmetra LX 16 series. Both of these have network management cards.
I have tried both the default PRTG-included APC library and I have downloaded the MIBs from APC...
Tue, 10 Jun, 2025 at 2:38 PM
Tried to setup a HTTP sensor on a remote probe to monitor the loading time of a web page using HTTPS without using a proxy server, but it always fail. In the log, the message said "No Response (-1) (code: PE105). However, if I try to...
Tue, 10 Jun, 2025 at 2:38 PM
Hello Exports,
I am using PRTG Network Monitor 12.3.4.3048. I want to save report and send email of my Routers, Switches and Servers Status at office hour (9 AM to 7 PM). My office open at 8AM to 8PM from Sunday to Friday. Night time aft...
Tue, 10 Jun, 2025 at 2:38 PM
Hello,
Befor i was monitoring my SMTP gateway by the PRTG WMI SMTP sent and receive sensors, it was working fine, but it was on Windows 2003.
Now my IIS SMTP services are on Windows 2008 R2, and the Classes Win32_PerfRawData_SMTPSVC_SMT...
Tue, 10 Jun, 2025 at 2:38 PM
Ich habe einen Bericht definiert. Nun möchte ich diesen Bericht als PDF-Dokument ausdrucken. Das Resultat ist die Fehlermeldung: "... Der lokale Druckerwarteschlangen-Dienst läuft nicht."
Article Comments
Hallo,
bitte...
Tue, 10 Jun, 2025 at 2:38 PM
We have integrated PRTG with AD. We have MANY users but in no way want to send a notification email to everyone in the group. Only certain users are deemed as "admins" of certain servers in our network.
While creating a new &q...
Tue, 10 Jun, 2025 at 2:38 PM
We are having lots of trouble making the SMTP/POP3 Round Trip sensor work.
Randomly some of the SMTP/POP3 sensors will just stop for no reason.
Saying "No data since 7/11/2012 12:26:59 PM"
Why would this occur?
Artic...
Tue, 10 Jun, 2025 at 2:38 PM
Hi,
if the error code is greater than 1 (warning level), i got error.
The SSH script's "returncode" has to be one of the following values:
Value Description
0 OK
1 WARNING
2 System Error (e.g. a network/socket error) ...
Tue, 10 Jun, 2025 at 2:38 PM
I have a number of scheduled tasks I wish to monitor.
I have configured the Upper & Lower Error Limits to trigger on <> 0, because any condition other than 0x0 is a failure as far as these tasks are concerned. However, if the se...
Tue, 10 Jun, 2025 at 2:38 PM
